Ag合金化对热挤压前后耐热Al-Cu-Mg合金组织和性能的影响

Effect of Metalized Ag on Microstructure and Properties of Heat Resistant Al-Cu-Mg Alloy Before and After Hot Extrusion

  • 摘要: 采用拉伸力学性能测试和金相分析,研究了Ag合金化对热挤压前后耐热Al-Cu-Mg合金组织与性能的影响。结果表明,Ag的微合金化可以改善热挤压后Al-Cu-Mg合金的显微组织,明显提高合金的强度、延伸率及高温热稳定性。显微组织分析认为,这主要归功于合金化后析出的Ω相的沉淀硬化。

     

    Abstract: The effect of metalized Ag on microstructure and properties of heat resistant Al-Cu-Mg alloy are investigated by tensile test and metallographic analysis. The results show that microstructure of Al-Cu-Mg alloy is improved, and strength, plasticity and thermal stability are increased respectively with metalized Ag which is mainly attribute to precipitation of Ω phase.

     

/

返回文章
返回