多元气体大电流MAG焊试验系统

包晔峰, 周昀, 吴毅雄, 楼松年

包晔峰, 周昀, 吴毅雄, 楼松年. 多元气体大电流MAG焊试验系统[J]. 材料开发与应用, 2003, 18(3): 14-17. DOI: 10.19515/j.cnki.1003-1545.2003.03.005
引用本文: 包晔峰, 周昀, 吴毅雄, 楼松年. 多元气体大电流MAG焊试验系统[J]. 材料开发与应用, 2003, 18(3): 14-17. DOI: 10.19515/j.cnki.1003-1545.2003.03.005
Bao Yefeng, Zhou Yun, Wu Yixiong, Lou Songnian. Test System for Multi-gas Shielded High-current MAG Welding[J]. Development and Application of Materials, 2003, 18(3): 14-17. DOI: 10.19515/j.cnki.1003-1545.2003.03.005
Citation: Bao Yefeng, Zhou Yun, Wu Yixiong, Lou Songnian. Test System for Multi-gas Shielded High-current MAG Welding[J]. Development and Application of Materials, 2003, 18(3): 14-17. DOI: 10.19515/j.cnki.1003-1545.2003.03.005

多元气体大电流MAG焊试验系统

详细信息
    作者简介:

    包晔峰,男,1966年生,江苏常州人,博士生,高级工程师,国际焊接工程师,主要从事焊接设备及工艺的研究。

  • 中图分类号: TG434

Test System for Multi-gas Shielded High-current MAG Welding

  • 摘要: 本文研制开发了一套多元气体大电流MAG焊试验系统,它包括一元化控制的IGBT逆变电源,电枢电压与速度反馈双闭环控制的双驱动送丝系统,双水冷焊枪以及质量流量闭环控制的精密气体配比供给系统。多元气体大电流MAG焊接试验证明,该系统具有焊接电源动态响应速度快;送丝速度稳定,调速范围宽,气体配比精密的特点,实现了φ 1.2mm焊丝大电流MAG焊接高效的目标,其熔敷速率为普通MAG焊的2~3倍。
    Abstract: A test system for multi-gas shielded high-current MAG welding is developed which includes and one-knob controlled IGBT inverter power supply, a dual-driver wire feeder with armature potential and speed feedback signal control, a dual circuit water cooling torch and a gases mixing supply unit with precise mass flow control. The system is characterized by fast response of power supply, stable speed of wire feeding with wide range of speed regulation and accurate gases supply. With the system, the deposition rate is twice as that with common MAG welding system, that make high-current MAG welding with φ 1.2mm wires possible.
计量
  • 文章访问数:  28
  • HTML全文浏览量:  6
  • PDF下载量:  2
  • 被引次数: 0
出版历程
  • 收稿日期:  2002-11-12
  • 网络出版日期:  2024-06-14

目录

    /

    返回文章
    返回