Cu-Al梯度功能材料性能研究

刘忆, 王晓亮

刘忆, 王晓亮. Cu-Al梯度功能材料性能研究[J]. 材料开发与应用, 2007, 22(1): 13-16. DOI: 10.19515/j.cnki.1003-1545.2007.01.004
引用本文: 刘忆, 王晓亮. Cu-Al梯度功能材料性能研究[J]. 材料开发与应用, 2007, 22(1): 13-16. DOI: 10.19515/j.cnki.1003-1545.2007.01.004
LIU Yi, WANG Xiao-liang. Property of Cu-Al Functional Gradient Material[J]. Development and Application of Materials, 2007, 22(1): 13-16. DOI: 10.19515/j.cnki.1003-1545.2007.01.004
Citation: LIU Yi, WANG Xiao-liang. Property of Cu-Al Functional Gradient Material[J]. Development and Application of Materials, 2007, 22(1): 13-16. DOI: 10.19515/j.cnki.1003-1545.2007.01.004

Cu-Al梯度功能材料性能研究

详细信息
    作者简介:

    刘忆,女,1956年生,四川中江县人,教授,从事复合材料及耐磨材料的研究

  • 中图分类号: TG146

Property of Cu-Al Functional Gradient Material

  • 摘要: 为解决大电流设备铜铝线接头电冲击、烧毁等问题,运用粉末叠层的方法制备了Cu-Al梯度功能材料试样。研究发现620℃烧结的7层试样具有较高的平均硬度和较低的电阻率,可用作铜铝导线的接头;试样的铜铝混合区烧结后有θ(CuAl2)生成,显著提高了局部区域的硬度;540℃烧结的试样电阻率最小;提高烧结温度,出现液相烧结,烧结进行更充分,θ(CuAl2)增加,平均硬度提高,电阻率也随之增加。
    Abstract: The purpose of the study is to solve the problem of burnout and electric shocking of copper and aluminum joints in high-current equipment.Copper/aluminum functional gradient material samples were prepared by powder overlaying.It was found that the seven lays sample sintered at 620℃ has higher hardness and lower resistivity,of which the joints of copper/aluminum wire could be made.θ(CuAl2) generated in sintered samples dilution zone and hardness in local area increased notablely.The resistivity of samples sintered at 540℃ is the lowest.As the sintering temperature increased,liquid sintering happened and the sintering perfomed more sufficient,so the content of θ(CuAl2) and then average hardness and the resistivity increased.
计量
  • 文章访问数:  30
  • HTML全文浏览量:  6
  • PDF下载量:  5
  • 被引次数: 0
出版历程
  • 收稿日期:  2006-09-06
  • 网络出版日期:  2024-03-29

目录

    /

    返回文章
    返回