卷取温度、冷轧总变形量对SPHD钢力学性能的影响

关建东, 康永林, 杜昕, 郑跃强

关建东, 康永林, 杜昕, 郑跃强. 卷取温度、冷轧总变形量对SPHD钢力学性能的影响[J]. 材料开发与应用, 2009, 24(1): 39-42,46. DOI: 10.19515/j.cnki.1003-1545.2009.01.012
引用本文: 关建东, 康永林, 杜昕, 郑跃强. 卷取温度、冷轧总变形量对SPHD钢力学性能的影响[J]. 材料开发与应用, 2009, 24(1): 39-42,46. DOI: 10.19515/j.cnki.1003-1545.2009.01.012
GUAN Jian-dong, KANG Yong-lin, DU Xin, ZHENG Yue-qiang. Influence of Coiling Temperature and Total Cold Rolling Reduction Rate on Mechanical Properties of SPHD Steel[J]. Development and Application of Materials, 2009, 24(1): 39-42,46. DOI: 10.19515/j.cnki.1003-1545.2009.01.012
Citation: GUAN Jian-dong, KANG Yong-lin, DU Xin, ZHENG Yue-qiang. Influence of Coiling Temperature and Total Cold Rolling Reduction Rate on Mechanical Properties of SPHD Steel[J]. Development and Application of Materials, 2009, 24(1): 39-42,46. DOI: 10.19515/j.cnki.1003-1545.2009.01.012

卷取温度、冷轧总变形量对SPHD钢力学性能的影响

详细信息
  • 中图分类号: TG335

Influence of Coiling Temperature and Total Cold Rolling Reduction Rate on Mechanical Properties of SPHD Steel

  • 摘要: 以CSP工艺在不同卷取温度下生产的冷轧基板SPHD为实验材料,采用不同的冷轧总变形量进行冷轧并退火。通过单向拉伸实验对不同工艺条件下试样的基本成形性能指标(r值、n值)和力学性能指标(屈服强度、抗拉强度、伸长率)进行测定,并对退火试样进行X射线织构测试分析。通过对比分析发现,当卷取温度为600℃,冷轧压下量为70%时,SPHD退火后会得到较强的γ纤维织构组分和良好的力学性能及优异的冲压性能。
    Abstract: SPHD hot strips produced by CSP process were coiled at different temperatures and then cold rolled with different reduction rate.After recrystallization annealing,the formability(r-value and n-value) and mechanical properties(YS,TS and A) were investigated through tensile tests.In addition,different kinds of technological conditions sheets were analyzed by means of X-ray diffraction(ODF).The results showed that fine mechanical properties,well formability and much more fraction of r-fiber texture will be obtained with coiling temperature at 610℃ and the cold-rolled reduction of 70%.
计量
  • 文章访问数:  38
  • HTML全文浏览量:  21
  • PDF下载量:  1
  • 被引次数: 0
出版历程
  • 收稿日期:  2008-10-27
  • 网络出版日期:  2024-03-29

目录

    /

    返回文章
    返回