Study on New PPS Composite Coating Preparation and Performance
-
摘要: 用浸涂法制备了G/MoS2/Ekonol/PES/PPS多元复合涂层, 以涂层结合强度为评价标准, 采用混料回归实验优化设计了G/MoS2/Ekonol/PES/PPS复合涂层的涂料配方, 用拉开法测定复合涂层的结合强度, 并对结合表面进行了观察和分析, 研究了涂料组成、涂层制备工艺参数和涂层厚度对涂层结合强度的影响.结果表明, 用浸涂法能制得力学性能优良的G/MoS2/Ekonol/PES/PPS复合涂层;采用典型配方Ekonol: PES: PPS: G/MoS2: 助剂=25: 20: 45: 8: 2(质量比)能够得到较大的结合强度.Abstract: G/MoS2/Ekonol/PES/PPS multiple composite coatings was prepared by the dip coating method. The components of different coatings of G/MoS2/Ekonol/PES/PPS complex-coating have been optimized by blending regression experiment based on the evaluation criterion of the bonding strength of the coatings. The bonding strength is determined by the pull-off test, and the bonding surface of the composite coatings has been studied. The effects of the coating components, preparing parameters of he coatings and coating thickness on the bonding strength of coatings are studied. Resultsshow that it is possible to prepare G/MoS2/Ekonol/PES/PPS composite coatings with good mechanical properties by the dip coating method. A larger bonding strength can be obtained by using the typital formula: Ekonol: PES: PPS: G/MoS2: additives=25:20:45:8:2.
-
Keywords:
- PPS /
- Ekonol /
- PES /
- composite coating /
- bonding strength
-
计量
- 文章访问数: 45
- HTML全文浏览量: 18
- PDF下载量: 2
下载:
