高温烟气管道铰链型膨胀节失效分析与设计优化

张爱琴

张爱琴. 高温烟气管道铰链型膨胀节失效分析与设计优化[J]. 材料开发与应用, 2014, 29(6): 99-103. DOI: 10.19515/j.cnki.1003-1545.2014.06.020
引用本文: 张爱琴. 高温烟气管道铰链型膨胀节失效分析与设计优化[J]. 材料开发与应用, 2014, 29(6): 99-103. DOI: 10.19515/j.cnki.1003-1545.2014.06.020
ZHANG Ai-qin. Design Optimization on the Hinge Type Expansion Joint of High Temperature Gas Pipeline[J]. Development and Application of Materials, 2014, 29(6): 99-103. DOI: 10.19515/j.cnki.1003-1545.2014.06.020
Citation: ZHANG Ai-qin. Design Optimization on the Hinge Type Expansion Joint of High Temperature Gas Pipeline[J]. Development and Application of Materials, 2014, 29(6): 99-103. DOI: 10.19515/j.cnki.1003-1545.2014.06.020

高温烟气管道铰链型膨胀节失效分析与设计优化

详细信息
    作者简介:

    张爱琴,女,1966年生,高级工程师,主要从事膨胀节研发。

  • 中图分类号: TH122

Design Optimization on the Hinge Type Expansion Joint of High Temperature Gas Pipeline

  • 摘要: 文章列举了烟机入口管线铰链型膨胀节失效的典型案例,分析了膨胀节产生失效的原因,通过有限元传热分析和现场温度分布实测结果对比,确定了高温烟道膨胀节主要受力结构件的设计温度;考虑高温蠕变的影响,对膨胀节立板和筒节焊接接头强度设计的许用应力进行了修正,并对膨胀节的设计结构提出了改进措施。
    Abstract: The typical case on the flue-gas-turbine input pipeline of the hinge type expansion joint was cited, and the reasons for the failure of expansion joints were analyzed. The field temperature distribution of expansion joint was analyzed by the finite element, and compared measured results. The results show that the temperature the hinge type expansion joint of high temperature gas pipeline by FEA is simulated accurately. Considered the impact of high temperature creep, the welded joint strength of Vertical plate and cylinder for the formula of design was modified; furthermore, the improvement of the expansion joint structure was proposed.
计量
  • 文章访问数:  40
  • HTML全文浏览量:  13
  • PDF下载量:  4
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-07-30
  • 网络出版日期:  2024-03-21
  • 刊出日期:  2014-12-24

目录

    /

    返回文章
    返回