RTM用低粘度乙烯基树脂性能研究

王雅婷; 杨瑞瑞; 李想

RTM用低粘度乙烯基树脂性能研究

中国船舶重工集团公司第七二五研究所, 河南洛阳 471023

详细信息

作者简介:
王雅婷,女,助理工程师,从事树脂基复合材料研究

中图分类号: TQ320.1;TB33
计量
- 文章访问数: 156
- HTML全文浏览量: 52
- PDF下载量: 21
出版历程
- 收稿日期: 2021-12-05
- 网络出版日期: 2022-06-10
- 刊出日期: 2022-06-10

Research on Properties of Low-viscosity Vinyl Resin for RTM

Luoyang Ship Material Research Institute, Luoyang 471023, China

摘要

摘要: 对RTM用乙烯基树脂的工艺特性、树脂及其复合材料的力学性能进行了研究。该树脂具有较低的黏度,25℃时约为240 mPa·s。分析了树脂的凝胶时间,得出凝胶时间与温度的函数,其表观活化能较大,成型时应严格控制树脂温度。结合DSC曲线,分析了该乙烯基树脂在不同升温速率下的固化放热行为,得出树脂理论的凝胶温度、固化温度和后固化温度。该树脂及其复合材料均具有良好的力学性能。
- 树脂传递模塑(RTM) /
- 乙烯基树脂 /
- 低粘度 /
- 固化动力学 /
- 力学性能
Abstract: The process characteristics of vinyl resin for RTM and the mechanical properties of the resin and its composite materials are studied. The resin has a relatively low viscosity, about 240 mPa·s at 25℃. The gel time of the resin is analyzed, and the function of gel time and temperature is obtained. The apparent activation energy is relatively large, so the resin temperature should be strictly controlled in the process of molding. DSC curve is applied to analyze the curing exothermic behavior of the vinyl resin at different heating rates, and the theoretical gel temperature, curing temperature and post-curing temperature of the resin are obtained. The resin and composite materials have good mechanical properties.
- resin transfer molding(RTM) /
- vinyl resin /
- low viscosity /
- cure kinetics /
- mechanical properties

HTML全文

参考文献(15)

[1]	宋燕利,杨龙,郭巍,等.面向汽车轻量化应用的碳纤维复合材料关键技术[J].材料导报,2016,30(17):16-25.
[2]	詹东.机翼复合材料缩比模型蒙皮的RTM成型工艺研究[D].大连:大连理工大学,2017.
[3]	李培旭,陈萍,苏佳智,等.复合材料先进液体成型技术的航空应用与最新发展[J].玻璃钢/复合材料,2016(8):99-104.
[4]	益小苏.航空复合材料科学与技术[M].北京:航空工业出版社,2013.
[5]	AOKI T,YOKOZEKI T.Some of the topics in composites research projects in Japan[C]//Aiaa/asme/asce/ahs/asc Structures,Structural Dynamics,&Materials Conference,2013.
[6]	梅启林,冀运东,陈小成,等.复合材料液体模塑成型工艺与装备进展[J].玻璃钢/复合材料.2014(9):52-62.
[7]	陈吉平,苏佳智,韩小勇,等.复合材料工型肋的RTM工艺模拟与优化[J].玻璃钢/复合材料,2017(7):82-87.
[8]	NAIK N K,SIRISHA M,INANI A.Permeability characterization of olymer marx composites by RTM/VARTM[J].Progress in Aerospace Sciences,2014,65:22-40.
[9]	KRACKE C,NONN A,KOCH C,et a1.Interaction of textile variability and flow channel distribution systems on flow front progression in the RTM process[J].Composites Part A:Applied Science and Manufacturing,2018,106A:70-81.
[10]	朱怡臻,王瑛,陈鸣亮,等.先进树脂基复合材料RTM成型工艺研究及应用进展[J].塑料工业,2020,48(5):18-22,128.
[11]	孟祥福,陈美玉,明璐.RTM工艺参数对复合材料缺陷控制的影响[J].热加工工艺,2018,47(20):123-125.
[12]	李江洪,郑亚萍,张曦,等.RTM用环氧树脂体系的浸润性及化学流变特性研究[J].中国塑料,2012,26(1):71-76.
[13]	李伟东,张金栋,李韶亮,等.耐高温双马来酰亚胺树脂的固化反应动力学和TTT图[J].材料工程,2016,44(9):44-51.
[14]	程浩,王亚飞,张凯,等.RTM用乙烯基树脂研究[J].船电技术,2020,40(6):53-55,59.
[15]	李慧,秦泽云,张旸等.VARTM用乙烯基树脂体系流变性能研究[J].热固性树脂,2012,27(4):25-28.