Study on Electrical Properties of Graphene-reinforced Al Matrix Composites
-
摘要: 采用粉末冶金法,制备了石墨烯增强铝基复合材料,研究了石墨烯含量及烧结温度对复合材料组织及力学性能、导电性能的影响。结果表明,当石墨烯添加量为0.3%(质量分数)、在580℃烧结1 h时,所得复合材料晶粒较细小,分布较均匀,致密度最大,为90.14%,电导率最高,为25.54 MS/m,硬度最大,为HB23.35。Abstract: The graphene-enhanced Al-based composites were prepared by powder metallurgy, and the effects of graphene content and sintering temperature on the micro-structure, mechanical and electrical properties were studied. The results showed that when the addition amount of graphene was 0.3% and the sintering parameter was 580℃ and 1 h, the obtained composite grains were fine and uniform, the maximum density was 90.14%, the conductivity was up to 25.54 MS/m, and the hardness was HB23.35.
-
Keywords:
- powder metallurgy /
- graphene /
- aluminum matrix composites /
- electrical conductivity
-
-
[1] 巩建国,唐彬彬,韩丽.铝基复合材料研究现状[J].热加工工艺,2014,43(4):23-31. [2] 齐天娇,俞泽民,许志鹏,等.石墨烯增强铝基复合材料的研究进展[J].热加工工艺,2016,45(10):6-9,14. [3] 刘兆平,周旭峰.浅谈石墨烯产业化应用现状与发展趋势[J].新材料产业,2013(9):4-11. [4] 任亚杰,黄文登.石墨烯的晶格振动与导热机理的研究[J].陕西理工学院学报(自然科学版),2014,30(5):68-72. [5] 肖瑞.石墨烯及其Al-20Si基复合材料的制备与性能研究[D].哈尔滨:哈尔滨工业大学,2014. [6] 高一波.复合材料的制备及其性能研究[D].太原:中北大学,2019. [7] 管仁国,连超,赵占勇,等.石墨烯铝基复合材料的制备及其性能[J].稀有金属材料与工程,2012,41(s2):607-611. [8] JEON C H,JEONG Y H,SEO J J,et al.Material properties of graphene/aluminum metal matrix composites fabricated by friction stir processing[J].International Journal of Precision Engineering&Manufacturing,2014,15(6):1235-1239.
[9] BASTWROSA M,KIM G Y,ZHU C,et al.Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering[J].Composites Part B:Engineering,2014,60(4):111-118.
[10] 李多生,吴文政,QIN Q H,等.石墨烯/Al复合材料的微观结构及力学性能[J].中国有色金属学报,2015,25(6):1498-1504. [11] 农彬艺.粉末冶金法制备石墨烯增强铝基复合材料及其性能研究[D].广西:广西大学,2017.
计量
- 文章访问数: 296
- HTML全文浏览量: 111
- PDF下载量: 17