Fatigue Evaluation of Welded Joints of TA31 Titanium Alloy
-
摘要: 钛合金是深海大型载人运载平台的常用材料,其焊接部位的疲劳性能不容忽视。本研究针对国产TA31钛合金对接接头和承载十字接头开展疲劳试验,用热点应力法对其疲劳强度进行评定。采用国际焊接协会推荐的方法进行数据处理,分别做出名义应力和热点应力的S-N曲线并进行对比。在此基础上引入缺口应力法,考虑板厚对焊接接头疲劳性能的影响,并提出板厚修正的公式,可为钛合金结构的疲劳评估和抗疲劳设计提供参考。Abstract: Titanium alloy is a common material for deep-sea large manned carrier platform, and its fatigue properties of welded parts cannot be ignored. In this study, the butt welding and load bearing cruciform welding are carried out on the domestic TA31 titanium alloy, and the fatigue strength of the joints are evaluated by the hot spot stress approach. The test data are calculated by the method recommended by the International Institute of Welding (IIW). The S-N curves of the nominal stress and hot spot stress are obtained and compared. The influence of plate thickness on the fatigue properties of the welded joints is analyzed by the notch stress approach, and the formula of plate thickness correction is obtained. These results can provide references for fatigue evaluation and anti-fatigue design of titanium alloy structures.
-
[1] 海敏娜, 黄帆, 王永梅. 浅析钛及钛合金在海洋装备上的应用[J]. 金属世界, 2021(5): 16-21. [2] 吴有生, 司马灿, 朱忠, 等. 海洋装备技术的重点发展方向[J]. 前瞻科技, 2022, 1(2): 20-35. [3] HOBBACHER A. Recommendations for fatigue design of welded joints and components[J]. Welding Research Council Bulletin, 2009: 1-144. [4] HOBBACHER A F. The new IIW recommendations for fatigue assessment of welded joints and components - A comprehensive code recently updated[J]. International Journal of Fatigue, 2009, 31(1): 50-58. [6] 刘刚, 黄如旭, 黄一. 复杂焊接接头多轴疲劳强度评估的等效热点应力法[J]. 焊接学报, 2012, 33(6): 10-14. [7] DONG P, HONG J K, OSAGE D A, et al. The master S-N curve method an implementation for fatigue evaluation of welded components in the ASME B&PV Code, Section VIII, Division 2 and API 579-1/ASME FFS-1[J]. Welding Research Council Bulletin,2010:1-252. [8] DONG P. A robust structural stress method for fatigue analysis of offshore/marine structures[J]. Journal of Offshore Mechanics and Arctic Engineering, 2005, 127(1): 68-74. [9] XIAO Z G, YAMADA K. A method of determining geometric stress for fatigue strength evaluation of steel welded joints[J]. International Journal of Fatigue, 2004, 26(12): 1277-1293. [10] 赵永庆. 我国创新研制的主要船用钛合金及其应用[J]. 中国材料进展, 2014, 33(7): 398-404. [11] 程德彬. 船用钛合金与航空钛合金的使用性能差异[J]. 材料开发与应用, 2012, 27(3): 60-63. [12] 胡毓仁, 李典庆, 陈伯真. 船舶与海洋工程结构疲劳可靠性分析[M]. 哈尔滨: 哈尔滨工程大学出版社, 2010. [13] RASAJ D, LAZZARIN P, BERTD F. Generalised Neuber concept of fictitious notch rounding[J]. Inter national Jurnal of Fatigae, 2013: 51105-51115. -
点击查看大图
计量
- 文章访问数: 89
- HTML全文浏览量: 14
- PDF下载量: 23
- 被引次数: 0
下载:
