Introduction of Humidity Resistance Test Standards of Coatings
-
摘要: 介绍了现行国标、ISO标准、ASTM标准中涂层耐湿性主要测试方法,对各标准中测试方法进行了归纳总结。湿热、箱内冷凝、喷水雾均为高温高湿环境,形成冷凝水的推动力较小;单侧冷凝温差较大,引起涂层破坏的推动力较大,在同样试验温度下,冷凝更易发生。在需要快速获得涂层耐湿性试验结果时,尤其是涂层耐冷凝性能时,可以优先选用单侧冷凝试验方法。Abstract: Humidity resistance test methods in GB standards, ISO standards and ASTM standards were introduced, and the test methods were summarized. Heat and humidity, condensation(in-cabinet exposure) and water fog were all in test atmosphere of high temperature and humidity, whose impetus for condensation was relatively smaller. While the temperature difference was large with the condensation(single-sided exposure), and the impetus for coating damage was large, so with the same test temperature, condensation was easier to happen. The condensation(single-sided exposure) was a preferred option when the humidity resistance result of coating, especially resistance performance to condensation, was urgently needed.
-
Key words:
- coatings /
- humidity resistance /
- heat and humidity /
- condensation /
- test methods
-
[1] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.漆膜耐湿热测定法:GB/T 1740-2007[S].北京:中国标准出版社,2008. [2] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.色漆和清漆耐湿性的测定连续冷凝法:GB/T 13893-2008[S].北京:中国标准出版社,2008. [3] 国家市场监督管理总局,国家标准化管理委员会.色漆和清漆耐湿性的测定第2部分:冷凝:GB/T 13893.2-2019[S].北京:中国标准出版社,2019. [4] The International Organization for Standardization.Paints and varnishes-Determination of resistance to humidity-Part 1:Condensation (single-sided exposure):ISO 6270-1-2017[S].Swithzerland:ISO,2017:1-6. [5] The International Organization for Standardization.Paints and varnishes-Determination of resistance to humidity-Part 2:Condensation (in-cabinet exposure with heated water reservoir):ISO 6270-2-2017[S].Swithzerland:ISO,2017:1-8. [6] American Society of Testing Materials.Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity:ASTM D2247-2020[S].West Conshohocken:ASTM International,2020:1-7. [7] American Society of Testing Materials.Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation:ASTM D4585M-2018[S].West Conshohocken:ASTM International,2018:1-4. [8] American Society of Testing Materials.Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus:ASTM D1735-2014[S].West Conshohocken:ASTM International,2014:1-3. [9] 王玫玫.涂层耐湿热性测试方法简介[J].上海涂料,2014,52(1):50-52. [10] 李欣,彭军,李潇茹.连续冷凝法测定涂层耐湿性的探讨[J].合成材料老化与应用,2016,45(2):87-90. [11] 付东兴,徐滨士,张伟,等.有机涂层起泡微观机制研究进展[J].材料保护,2007,40(2):42-45. [12] 谢飞舟,张同利,李杰,等.水性漆的特点及其应用[J].合成材料老化与应用,2019,48(1):108-110. -
点击查看大图
计量
- 文章访问数: 402
- HTML全文浏览量: 147
- PDF下载量: 18
- 被引次数: 0
下载:
