column
Fatigue Crack Propagation of Copper Alloy ZCuAl8Mn14Fe3Ni2 for Propeller
ZHANG Ya-jun, LI Yong-jun, LIANG Jian, ZHANG Xin-yao, CHA Xiao-qin, ZHANG Li-juan
2010, 25(5): 1-3,8. DOI: 10.19515/j.cnki.1003-1545.2010.05.001
Abstract PDF
Elements Diffusion of Al-Si Coating on Nickel-Base Superalloy K4104 in High Temperature Oxidation Process
YANG Shi-wei, SHI Yue-jie, ZHANG Tian-yu, WANG Yi-han
2010, 25(5): 4-8. DOI: 10.19515/j.cnki.1003-1545.2010.05.002
Abstract PDF
Investigation of Folding Angle Process for 5083 Al Alloy Plates
ZHANG Jun, ZHANG Yi-bin
2010, 25(5): 9-11. DOI: 10.19515/j.cnki.1003-1545.2010.05.003
Abstract PDF
Study on Dynamic Vickers Hardness of As-extruded Mg-10Gd-3Y Alloy
AN Lin-lin, YANG Su-yuan
2010, 25(5): 12-15. DOI: 10.19515/j.cnki.1003-1545.2010.05.004
Abstract PDF
Anodic Oxidation Investigation on Ti80 Type Marine Titanium Alloy under Direct Current Mode
SHI Xu-zhong, WANG Yue, YU Xiang-fei, CHEN Pai-ming, WANG Yan-qiu, LIN Fu-wen
2010, 25(5): 16-19. DOI: 10.19515/j.cnki.1003-1545.2010.05.005
Abstract PDF
Study on the Case Hardenability of New Type High-alloy Carburizing Gear Steel
GAO Jin-zhu, WANG Ai-xiang, GU Min, XU Hong-xiang
2010, 25(5): 20-22,26. DOI: 10.19515/j.cnki.1003-1545.2010.05.006
Abstract PDF
Effects of Thermal Deformation Parameters on Mechanical Properties of 16Mn2VB Steel
HE Lei
2010, 25(5): 23-26. DOI: 10.19515/j.cnki.1003-1545.2010.05.007
Abstract PDF
Development of High Toughness Low-temperature Steel Electrode HH-W707
CHEN Juan-juan, LU Ya-zhen, LIAO Yong-shan, GU Xiao-yang
2010, 25(5): 27-29. DOI: 10.19515/j.cnki.1003-1545.2010.05.008
Abstract PDF
Experimental Study on Micro-Mechanical Properties of Single Crystal Silicon Based on TriboIndenter
WANG Qian
2010, 25(5): 30-33. DOI: 10.19515/j.cnki.1003-1545.2010.05.009
Abstract PDF
The Research and Application on New-type Rust Removal Pharmaceutical
WANG Xiang-hong, XIE Bing
2010, 25(5): 34-38. DOI: 10.19515/j.cnki.1003-1545.2010.05.010
Abstract PDF
Influence of Abrasive Blasting on Properties of Al Alloys
ZHANG Hai-yong, LIN Hong-ji, MENG Xian-lin
2010, 25(5): 39-42. DOI: 10.19515/j.cnki.1003-1545.2010.05.011
Abstract PDF
Study on Properties of Sisal Fiber/Glass Fiber/Polypropylene Composites Immersed in Water
LIU Ting, LU Shao-rong, WANG Yi-jing, ZHANG Chen-xi, BAN Jian-feng
2010, 25(5): 43-46,50. DOI: 10.19515/j.cnki.1003-1545.2010.05.012
Abstract PDF
Application of WT-MV 3100 Shooting and Measurement Software in Metallographical Analysis
LI Zhan-jian
2010, 25(5): 47-50. DOI: 10.19515/j.cnki.1003-1545.2010.05.013
Abstract PDF
The Study of the Ultrasonic Effect on Distribution of Particles in Solidified Paraffin
JIN Yan, BI Xue-gong, LI Yun-fei
2010, 25(5): 51-54,59. DOI: 10.19515/j.cnki.1003-1545.2010.05.014
Abstract PDF
Analysis of 40Cr Steel Piston Heat Treatment Process
WU Yuan-hui
2010, 25(5): 55-56. DOI: 10.19515/j.cnki.1003-1545.2010.05.015
Abstract PDF
Experimental Study on the Protection of Flow Surface Using Topological Interlocking Composite Material
LU Li-san, YANG Yong, HAO Bo-jin, BI Sheng
2010, 25(5): 57-59. DOI: 10.19515/j.cnki.1003-1545.2010.05.016
Abstract PDF
Study on the Swelling Kinetic of P（AM-co-AMPS）-based Hydrogels
LI Yun-long, KE Ai-ru, OUYANG Na, LIN Song-bo
2010, 25(5): 60-63,68. DOI: 10.19515/j.cnki.1003-1545.2010.05.017
Abstract PDF
The Study on Thermoelectric Properties of (La1-xCax)VO3（0≤x≤1） Films by Combinatorial Pulsed Laser Deposition
WANG Qun-jiao, ZHANG Yi-bin
2010, 25(5): 64-68. DOI: 10.19515/j.cnki.1003-1545.2010.05.018
Abstract PDF
Research on Welding Process of 45 Steel and 40Cr Steel
WANG Xiao-zhen, TIAN Gang-ling, ZHENG Zhi-shuai, ZHU Chao-feng
2010, 25(5): 69-71,77. DOI: 10.19515/j.cnki.1003-1545.2010.05.019
Abstract PDF
The Machining Characteristic of Melt foamed Aluminum
FU Zi-lai
2010, 25(5): 72-77. DOI: 10.19515/j.cnki.1003-1545.2010.05.020
Abstract PDF
Research Status of the Raw Material for Selective Laser Sintering
JIANG Kai-yi, GUO Yan-ling, LIU Xiang
2010, 25(5): 78-81. DOI: 10.19515/j.cnki.1003-1545.2010.05.021
Abstract PDF
Development of Low Formaldehyde-emission UF Resin Polymer Composite
GUAN Qi, LIU Jie, WU Kai-fei, GUO Xiao-guo, LI Hua-ling
2010, 25(5): 82-84. DOI: 10.19515/j.cnki.1003-1545.2010.05.022
Abstract PDF
Economic Analysis of the Using of Titanium and Titanium Alloy in Ship Building
PAN Luo-kun
2010, 25(5): 85-88. DOI: 10.19515/j.cnki.1003-1545.2010.05.023
Abstract PDF
Research Progress of Environmentally Friendly Concrete
LI Meng, CHEN Hong-shu, WANG Jie-liang
2010, 25(5): 89-94. DOI: 10.19515/j.cnki.1003-1545.2010.05.024
Abstract PDF
The Study on Application of Lithium Hydride Film
LEI Jie-hong, DUAN Hao, XING Pi-feng, TANG Yong-jian
2010, 25(5): 95-97. DOI: 10.19515/j.cnki.1003-1545.2010.05.025
Abstract PDF
A Method to Increase the Sensitivity of Film Thickness Testing
HU Xiu-li, YOU Bai-qiang, YU Hai-tao
2010, 25(5): 98-101. DOI: 10.19515/j.cnki.1003-1545.2010.05.026
Abstract PDF