Ha Jun. Cutting Processing of Several Austenitic Heat-resistance Steels[J]. Development and Application of Materials, 2000, 15(6): 14-17. DOI: 10.19515/j.cnki.1003-1545.2000.06.005
Citation: Ha Jun. Cutting Processing of Several Austenitic Heat-resistance Steels[J]. Development and Application of Materials, 2000, 15(6): 14-17. DOI: 10.19515/j.cnki.1003-1545.2000.06.005

Cutting Processing of Several Austenitic Heat-resistance Steels

More Information
  • Received Date: May 31, 2000
  • Available Online: June 17, 2024
  • Considering the different properties of heat-resisting alloys, such as ZG35Cr25Ni12、OCr25Ni20、ZG40Cr25Ni20 and the newly developed alloys ZGCr50Ni50, OCr56Ni44Ti , and by selecting different cutters, cutters' geometrical parameters and cutting strokes, cutting processing experiments were carried out and the processing parameters of turning, planing and drilling of these alloys were obtained, which have been applied in our production and brought about good effects.
  • Related Articles

    [1]WANG Sijie, YANG Junwei, ZI Haoran. Structural Design of Multi-component Material for Passive Protection against Explosion and Bulletproof with Double Cutting Energy Dissipation[J]. Development and Application of Materials, 2024, 39(3): 110-116.
    [2]ZHANG Dapeng, FAN Yuanbo, NIU Yanping, SHI Changliang, CAI Yuehua. Effect of Sn Content on Microstructure, Machinability and Mechanical Properties of 2011 Aluminum Alloy Bar[J]. Development and Application of Materials, 2021, 36(3): 1-6.
    [3]YANG San-qiang, LI Mao-wei, ZOU Dan, LU Guo-dong, ZHANG Yu-liang. Study On Processing of Graphite Foam by Dry Machining[J]. Development and Application of Materials, 2015, 30(4): 49-54. DOI: 10.19515/j.cnki.1003-1545.2015.04.010
    [4]SHI Chong, LONG Yu-fei, LIU Yu, WANG Kai-ge, LI Xiang-bo, XING Lu-kuo, HUANG Guo-sheng, XU Li-kun. Optimization of Process Parameters of Low-Pressure Cold-Sprayed Aluminum Coating[J]. Development and Application of Materials, 2013, 28(5): 33-37. DOI: 10.19515/j.cnki.1003-1545.2013.05.010
    [5]GUO Jing-jie, HUANG Lian-tao, WU Lun-fa. Development of Underwater Wet Welding and Cutting Material[J]. Development and Application of Materials, 2012, 27(6): 69-71. DOI: 10.19515/j.cnki.1003-1545.2012.06.016
    [6]YAO Hui, WU Qiong, JIN Yan, ZHAO Junhua. Performance Analysis and Fabrications of Tool Materials in Common Use for High Speed Machining[J]. Development and Application of Materials, 2012, 27(4): 99-101,110. DOI: 10.19515/j.cnki.1003-1545.2012.04.022
    [7]FU Zi-lai. The Machining Characteristic of Melt foamed Aluminum[J]. Development and Application of Materials, 2010, 25(5): 72-77. DOI: 10.19515/j.cnki.1003-1545.2010.05.020
    [8]YANG Xiao-kang, YANG Hong-jin, LEI Ya-jun, CAO Ji-min, XIAO Song-tao, YANG Hua-bin. Improvement of TiNi Wire Machinability[J]. Development and Application of Materials, 2008, 23(6): 9-11. DOI: 10.19515/j.cnki.1003-1545.2008.06.004
    [9]YAN Gang, FAN Xiao-bin, ZHANG Xiao-mei, ZHAO Dan, ZHAO Da-wei. Effects of RTM Process Parameters on the Performance of Composites[J]. Development and Application of Materials, 2008, 23(2): 27-30,39. DOI: 10.19515/j.cnki.1003-1545.2008.02.008
    [10]LI Wei, SHI Qing-nan, PEI He-zhong, ZHANG Guo-liang, WANG Xiao-qi. Product Performance Affected by Powder Injection Molding Process Parameters[J]. Development and Application of Materials, 2008, 23(1): 30-34. DOI: 10.19515/j.cnki.1003-1545.2008.01.008

Catalog

    Article Metrics

    Article views (59) PDF downloads (0) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return