XU Zhi-gang, SUN Xian-qi, TANG Peng, WANG Zhi-yun. Mechanical Properties and Microstructures of Fe-Al-Cu Alloy[J]. Development and Application of Materials, 2005, 20(6): 13-16. DOI: 10.19515/j.cnki.1003-1545.2005.06.004
Citation: XU Zhi-gang, SUN Xian-qi, TANG Peng, WANG Zhi-yun. Mechanical Properties and Microstructures of Fe-Al-Cu Alloy[J]. Development and Application of Materials, 2005, 20(6): 13-16. DOI: 10.19515/j.cnki.1003-1545.2005.06.004

Mechanical Properties and Microstructures of Fe-Al-Cu Alloy

More Information
  • Received Date: April 04, 2005
  • Available Online: June 14, 2024
  • Mechanical properties and microstructures of Fe-Al-Cu and Fe-Al-Cu alloyed with elements Ti,Mn and B were studied.The results of powder diffraction,strength test and microstructure analysis manifested that Fe-Al-Cu alloy consists of solid-solution α-Fe,solid-solution Cu and precipitated phase dispersed in solid-solution α-Fe.Elements Ti and B are beneficial to refine grains and meliorate the tensile strength of the alloy.With addition of proper amount of Ti,Mn and B,the mechanical properties of the alloy are improved.
  • Related Articles

    [1]GENG Yaoxiang, SHAN Zhifa, CHEN Yongkang, ZAI Chunfeng, WANG Xiao, GAO Xing, WANG Yuxin. Processability, Microstructure, and Mechanical Property of Al-Si-Mg-Zr-Cu Alloy Fabricated by Selective Laser Melting[J]. Development and Application of Materials, 2024, 39(1): 23-29.
    [2]LI Bobo, HAO Xiaobo, LIU Yinqi, ZHANG Qiang, LI Yang. Study on Thermal Processing Technology for Improving the Plasticity and Toughness of Ti70 Medium Thick Plate[J]. Development and Application of Materials, 2020, 35(2): 33-38.
    [3]GAO Zhenpeng, GONG Xuhui, XUE Gang, LIU Gang. Relationship of Conventional Mechanical Property and Chemical Composition[J]. Development and Application of Materials, 2018, 33(5): 7-13. DOI: 10.19515/j.cnki.1003-1545.2018.05.002
    [4]ZHANG Xianfeng, XU Kuilong, CAI Haichen. Analysis of Transverse Tensile Tests of Welded Joint[J]. Development and Application of Materials, 2018, 33(1): 12-15. DOI: 10.19515/j.cnki.1003-1545.2018.01.003
    [5]LUO Xian-fu, CHA Xiao-qin, ZHAO Yang, ZHENG Guo-hua, ZHANG Li-juan. Effect of Aging Time on Stress Corrosion Cracking Susceptibility of Al-3.88Cu-1.18Mg-0.31Mn Alloy[J]. Development and Application of Materials, 2015, 30(3): 31-36. DOI: 10.19515/j.cnki.1003-1545.2015.03.007
    [6]YU Chao, WEN Qing-zhen, ZHU Jin-hua, WANG Xiao-jun. Service Life Prediction for Polyurethane Used in Air[J]. Development and Application of Materials, 2015, 30(2): 67-70. DOI: 10.19515/j.cnki.1003-1545.2015.02.014
    [7]DENG Wan-ping, WANG Ren-fu, XUE Gang, YANG Chao-Fei. Superplasticity of 10CrNi5MoV Steel[J]. Development and Application of Materials, 2014, 29(3): 21-24. DOI: 10.19515/j.cnki.1003-1545.2014.03.005
    [8]WANG Meng-guang, CHEN Zhi-qiang, BAO Shu-juan, ZHOU Hong-qiang. Effect of Al, Sn and Cu on Mechanical Properties and Young's Modulus of Titanium Alloy[J]. Development and Application of Materials, 2011, 26(6): 22-24. DOI: 10.19515/j.cnki.1003-1545.2011.06.006
    [9]MA Yan-hui, ZHANG Tian-hui, LI Hua-ying, XU Ren-ping. Forecasting for Hardness Probability Distribution and Allowable Tensile Strength Value of 35CrMoV Steel[J]. Development and Application of Materials, 2011, 26(3): 8-11. DOI: 10.19515/j.cnki.1003-1545.2011.03.003
    [10]CHEN Ai-zhi, LIU Yu, NIU Ji-cheng, YI Chuan-bao. A Discussion of Bend Diameter in Bend Test of 10CrNi3MoV Steel Welded Joints[J]. Development and Application of Materials, 2007, 22(5): 1-3. DOI: 10.19515/j.cnki.1003-1545.2007.05.001
  • Cited by

    Periodical cited type(3)

    1. 薛钢. 承受双向等拉应力的平面应变I型裂纹线弹性断裂的I_1准则与K准则一致性分析. 材料开发与应用. 2023(01): 1-8 . 本站查看
    2. 薛钢. 承受双向等拉应力平面贯穿型中心切口弹性应力集中系数的尺寸效应分析. 材料开发与应用. 2023(02): 1-9 . 本站查看
    3. 薛钢. 基于I_1断裂准则的圆棒试样单轴拉伸断裂过程分析. 材料开发与应用. 2023(06): 100-110 . 本站查看

    Other cited types(0)

Catalog

    Article Metrics

    Article views (26) PDF downloads (2) Cited by(3)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return