Citation: | FENG Tang-fu, XU Qi-ming, CHEN Tao. Study on the Low Power Loss of NiCuZn Ferrite[J]. Development and Application of Materials, 2007, 22(5): 4-6. DOI: 10.19515/j.cnki.1003-1545.2007.05.002 |
[1] |
邵峰,朱孝平,袁兴华,等.低损耗NiCuZn铁氧体[C].中国磁性材料产业市场发展高峰论坛,深洲,2006.
|
[2] |
M櫣rbe J,T pfer J.Ni-Cu-Zn Ferrites for lowtemperaturefiring:II.effects of powder morphology and Bi2O3additionon microstructure and permeability[J].J Electroceram,2006,16:199-205.
|
[3] |
Jen-Yan Hsu,Wen-Song KO,Chi-Jen Chen.The effect ofV2O5on the sintering of NiCuZn ferrite[J].IEEE TransMagn,1995,31(6):3994-3996.
|
[4] |
SeOS H,OhJ H.Effect of MoO3addition onsintering be-haviors and magnetic properties of NiCuZnferritefor multi-layer chipinductor[J].IEEE Trans Magn,1999,35(5):3412-3414.
|
[5] |
Hui Zhong,Huai Wu Zhang,Hai Tao Zhou,et al.Effectsof WO3substitution on electromagnetic properties ofNiCuZn ferrite[J].Journal of Magnetism and MagneticMaterials,2006,300:445-450.
|
[6] |
向兴元,张怀武.Co2O3或/和V2O5掺杂对NiZn铁氧体磁性能的影响[J].磁性材料及器件,2003,34(3):9-10.
|
[1] | LI Han, LIU Fengzhu, CUI Yunfeng, LI Shikai, WANG Wenyan, XIE Jingpei, HUANG Wenjun, DIAO Xiaogang. Effect of Y Addition on Microstructure and Mechanical Properties of Ti-6Al-4V-2Cr-1.5Mo Alloy[J]. Development and Application of Materials, 2024, 39(4): 38-44,75. |
[2] | SUN Jianjun, LIU Hanqiang, WANG Yongzhao, LEI Zhufang, LI Wenfu, CHEN Huidong. Influence of Oxygen Coefficient on the Microstructure and Hardness of Al2O3/Cu Powder[J]. Development and Application of Materials, 2019, 34(6): 15-20. DOI: 10.19515/j.cnki.1003-1545.2019.06.004 |
[3] | ZHOU Jun-shi, WANG Yong-an, XU Qi-ming, HAO Li-jun. Microstructure and Properties of Bi-CVG Ferrite With Low B2O3 Dopant[J]. Development and Application of Materials, 2009, 24(6): 28-32. DOI: 10.19515/j.cnki.1003-1545.2009.06.007 |
[4] | LIU Zhi-gang, LIU Ying-cai, CHU Lei, ZHANG Ning, DING Li-li, RONG Ding-hui. Effects of Al2O3-doping on Microstructure and Performance of ZrO2 Ceramics[J]. Development and Application of Materials, 2008, 23(6): 12-15. DOI: 10.19515/j.cnki.1003-1545.2008.06.005 |
[5] | XIN Yong-lei, XU Li-kun, LI Xian-guo, WANG Jun-tao, LI Xiang-bo, CHEN Guang-zhang. The Effect of Surfactant on the Properties of Ti/IrO2+Ta2O5 Anode[J]. Development and Application of Materials, 2008, 23(5): 43-47. DOI: 10.19515/j.cnki.1003-1545.2008.05.010 |
[6] | XIA Hui-fang, XU Jian-sheng, ZHOU Hong-xing. A Study of Nano-copper as Additives in Lubricants Oils[J]. Development and Application of Materials, 2008, 23(2): 40-41,60. DOI: 10.19515/j.cnki.1003-1545.2008.02.011 |
[7] | HUANG Li-fang, ZHENG Zhi-xiang, LU: Jun, WU Yu-cheng. Low Temperature Sintering of Alumina Ceramics with MnO2-TiO2-MgO Additives[J]. Development and Application of Materials, 2008, 23(1): 5-7. DOI: 10.19515/j.cnki.1003-1545.2008.01.002 |
[8] | XIAO Dai-hong, SONG Min, CHEN Kang-hua, CHEN Fang-quan. Microstructure and Mechanical Properties of in Situ Synthesized TiB-Nd2O3-Ti Composite by Ingot Metallurgy[J]. Development and Application of Materials, 2007, 22(2): 8-12. DOI: 10.19515/j.cnki.1003-1545.2007.02.003 |
[9] | XIE Yan-chun, CUI Hong-zhi, YUAN Jian-jun. Microstructures of In-situ TiB2/Al2O3 Composite Ceramic[J]. Development and Application of Materials, 2006, 21(5): 8-10,29. DOI: 10.19515/j.cnki.1003-1545.2006.05.003 |
[10] | WANG Yong-chao. Microstructure and Properties of Nanometer Al2O3 Strengthened Cu-based ODS 20[J]. Development and Application of Materials, 2006, 21(3): 7-9,29. DOI: 10.19515/j.cnki.1003-1545.2006.03.003 |