HU De-sheng, ZHANG Hua-wei, XIE Chun-sheng. Microstructure and Property of Surface-welded Cladding of 5CrMnMo Anchor Push-rod[J]. Development and Application of Materials, 2007, 22(6): 9-11,16. DOI: 10.19515/j.cnki.1003-1545.2007.06.003
Citation:
HU De-sheng, ZHANG Hua-wei, XIE Chun-sheng. Microstructure and Property of Surface-welded Cladding of 5CrMnMo Anchor Push-rod[J]. Development and Application of Materials, 2007, 22(6): 9-11,16. DOI: 10.19515/j.cnki.1003-1545.2007.06.003
HU De-sheng, ZHANG Hua-wei, XIE Chun-sheng. Microstructure and Property of Surface-welded Cladding of 5CrMnMo Anchor Push-rod[J]. Development and Application of Materials, 2007, 22(6): 9-11,16. DOI: 10.19515/j.cnki.1003-1545.2007.06.003
Citation:
HU De-sheng, ZHANG Hua-wei, XIE Chun-sheng. Microstructure and Property of Surface-welded Cladding of 5CrMnMo Anchor Push-rod[J]. Development and Application of Materials, 2007, 22(6): 9-11,16. DOI: 10.19515/j.cnki.1003-1545.2007.06.003
Microstructure and property of surface-welded cladding of 5CrMnMo anchor push-rod were studied.D322(GB EDRCrMoWV-A1)welding material with the better properties than basic material was employed to form surface-welding clading on 5CrMnMo invalid anchor push-rod.Microstructure,hardness,thermal fatigue-resistance and wear-resistance properties of the surface-welded cladding were investigated.The results show that D322 cladding tend to get uniformly needle-shaped martensite after annealing at 350℃.The average microhardness of the cladding is HRC54~55 higher than that in using state of the 5CrMnMo anchor push-rod.Wear-resistance of the D322 doubles that of the 5CrMnMo,which will extend the life of the anchor push-rod.
DownLoad: