Citation: | CAO Guo-liang, LI Guo-ming, CHEN Shan, CHANG Wan-shun, CHEN Xue-qun. Effect of Dissolved Oxygen on Pitting Potential Determination of Carbon Steel and Mn Steel[J]. Development and Application of Materials, 2008, 23(3): 32-35. DOI: 10.19515/j.cnki.1003-1545.2008.03.008 |
[1] | WANG Hui, WANG Haitao, XU Shi, WANG Tingyong, WANG Hongren, WEI Jianfeng. The Effect of Precursor Concentration on Chlorine Evolution Properties of IrTaSnSb Metal Oxide Anode[J]. Development and Application of Materials, 2019, 34(1): 68-73. DOI: 10.19515/j.cnki.1003-1545.2019.01.014 |
[2] | SHI Xuzhong, LIU Xiaohe, YU Xiangfei, WANG Yue, ZHANG Yanyang. Study on the Influence Factors of Hard Anodic Oxidation of 6061 Aluminum Alloy[J]. Development and Application of Materials, 2018, 33(4): 53-58. DOI: 10.19515/j.cnki.1003-1545.2018.04.010 |
[3] | WANG Tong-kun, HUANG Xiang, ZHEN Guan-sheng. High Temperature Phase Transformation of Lanthanum Oxide Doped Alumina[J]. Development and Application of Materials, 2013, 28(3): 88-93. DOI: 10.19515/j.cnki.1003-1545.2013.03.020 |
[4] | LI Zhao-feng, JIANG Peng, ZHANG Jian-xin, LIAO Zhi-qian, LI Shi-kai. Preparation and Performance of Nano Anti-fouling Coatings by Microarc Oxidation[J]. Development and Application of Materials, 2012, 27(6): 48-53. DOI: 10.19515/j.cnki.1003-1545.2012.06.012 |
[5] | SHI Xu-zhong, CHEN Pai-ming, WANG Yue, YU Xiang-fei. The Insulation Properties of Anodic Oxidation and Microarc Oxidation Films on 5A06 Aluminum Alloy[J]. Development and Application of Materials, 2012, 27(1): 51-55. DOI: 10.19515/j.cnki.1003-1545.2012.01.013 |
[6] | JI Li, ZHANG Tian-you, ZHANG Dong. Influence of Ultrasonic Frequencies and Modes on Exfoliation of Graphite Oxide[J]. Development and Application of Materials, 2011, 26(1): 42-44,55. DOI: 10.19515/j.cnki.1003-1545.2011.01.012 |
[7] | MOU Ying-ju, LIU Wei-juan, LIU Gang, WANG Ya-ming. Present Status and Preparation Technologys of Iron Oxide Nanoparticles[J]. Development and Application of Materials, 2009, 24(2): 71-76. DOI: 10.19515/j.cnki.1003-1545.2009.02.018 |
[8] | WANG Ling-li, PENG Qiao. Selection of Oxidative Thermal Treatment Temperature of Ru0.15Ir0.15Ti0.7/Ti Coating Anode[J]. Development and Application of Materials, 2007, 22(4): 4-6. DOI: 10.19515/j.cnki.1003-1545.2007.04.002 |
[9] | ZHANG Yu-xin. Micro-arc Oxidation on Surface of Marine Titanium Alloy[J]. Development and Application of Materials, 2006, 21(3): 26-29. DOI: 10.19515/j.cnki.1003-1545.2006.03.009 |
[10] | MA Zhan-hong, JIA Jiang-yi, SUN Le-min. Progress in Manufacture Technology of Silver-metal Oxide (AgMeO) Electrical Contacl Materials[J]. Development and Application of Materials, 2004, 19(4): 39-43. DOI: 10.19515/j.cnki.1003-1545.2004.04.011 |