Citation: | ZHANG Xiao, SHAO Jun, YAO Run-gang, WANG Ren-fu, XUE Gang. FEM Analysis of Residual Stress Induced by Ultrasonic Impact Treatment in Welded Jionts of High Strength Steel[J]. Development and Application of Materials, 2009, 24(2): 4-6,32. DOI: 10.19515/j.cnki.1003-1545.2009.02.002 |
[1] | YANG Sanqiang, WANG Lei, LI Maowei, GAO Zhanjiao, HAN Jianchao, QI Junfeng. Study on Residual Stress Relief and Shape Accuracy Retention of Titanium Alloy Parts[J]. Development and Application of Materials, 2024, 39(4): 76-82. |
[2] | DONG Zhixiang, YANG Junfeng, FAN Fangxiong, WANG Lingshui. Study on Stress Corrosion Behavior of High Strength Alloy Steel[J]. Development and Application of Materials, 2024, 39(3): 56-60. |
[3] | MA Qiang, CHEN Yongwei, WANG Tao, HE Peng, CHEN Xiaojiang, JIN Xiao, ZHENG Bin. Progress Research on the Interlayer Assisted Brazing of Ceramic and Metal to Relieve Residual Stress[J]. Development and Application of Materials, 2023, 38(3): 17-23. |
[4] | DING Penglong, CHEN Lei, HE Liang, YU Jun. Experimental Measurement and Numerical Simulation of Residual Stress on Butt Welding Steel Plates[J]. Development and Application of Materials, 2023, 38(2): 16-22. |
[5] | LI Dongming, LI Rongfeng, WANG Jing, WANG Weidong, LI Gan, ZHANG Qiangsheng, ZHANG Shuyan. Theoretical Derivation and Analysis of the Stress Equation under the Local Yield State of Uniaxial Tension[J]. Development and Application of Materials, 2022, 37(6): 27-31. |
[6] | WAN Songlin, WU Songlin. Numerical Simulation Analysis for the Welding Residual Stress of Low Strength Match Butt Joints[J]. Development and Application of Materials, 2015, 30(1): 33-37. DOI: 10.19515/j.cnki.1003-1545.2015.01.007 |
[7] | LIU Jun, GUO Xiao-hui, HE Gang, ZHANG Hao, WANG Gang. Effect of the Different Weld Method on Stress and Deformations of TA2 Weld[J]. Development and Application of Materials, 2013, 28(5): 14-17. DOI: 10.19515/j.cnki.1003-1545.2013.05.004 |
[8] | LONG Xing-ping, WU Song-lin. Distribution of Residual Stress in the Restrained Ring-type Weld of High Strength Hull Steel[J]. Development and Application of Materials, 2012, 27(1): 11-14. DOI: 10.19515/j.cnki.1003-1545.2012.01.003 |
[9] | LI Jing-yong, WANG Hu, LIU Zhi-peng, LU Ya-ming. Numerical Simulation of Welding Residual Stresses and Distortions of Aluminum Alloy Cylinder under Pre-tension Stresses[J]. Development and Application of Materials, 2008, 23(5): 52-55. DOI: 10.19515/j.cnki.1003-1545.2008.05.012 |
[10] | FANG Dong, CHEN Ji-zhi. Finite Element Analysis of Stress Concentration at the Root of Screw Thread of High Strength Bolt[J]. Development and Application of Materials, 2007, 22(2): 37-39. DOI: 10.19515/j.cnki.1003-1545.2007.02.010 |