AN Lin-lin, YANG Su-yuan. Study on Dynamic Vickers Hardness of As-extruded Mg-10Gd-3Y Alloy[J]. Development and Application of Materials, 2010, 25(5): 12-15. DOI: 10.19515/j.cnki.1003-1545.2010.05.004
Citation: AN Lin-lin, YANG Su-yuan. Study on Dynamic Vickers Hardness of As-extruded Mg-10Gd-3Y Alloy[J]. Development and Application of Materials, 2010, 25(5): 12-15. DOI: 10.19515/j.cnki.1003-1545.2010.05.004

Study on Dynamic Vickers Hardness of As-extruded Mg-10Gd-3Y Alloy

More Information
  • Received Date: March 29, 2010
  • Available Online: March 28, 2024
  • The dynamic Vickers hardness of as-extruded Mg-10Gd-3Y alloy is investigated and the microstructure around the indentation is analyzed.The results show that the dynamic Vickers hardness of as-extruded Mg-10Gd-3Y alloy is higher than the corresponding static ones,and is stress rate sensitivie.The dynamic Vickers hardness increases and reaches maximum with increasing strain rate.There is the twin and deformation around the indentation region,and the number of twin reduces with increasing strain rate.
  • Related Articles

    [1]ZHU Hai, WANG Honghong, WANG Yangwen, ZHANG Shuchang, DU Zhuotong, ZHA Xiaoqin. Relationship between Vickers Hardness and Strength of High Manganese Austenitic Cryogenic Steel for LNG[J]. Development and Application of Materials, 2024, 39(5): 63-69.
    [2]WANG Ying, YANG Shengli, LIU Xiaoyong. Study on Tensile Stress Corrosion Behavior of Titanium Alloy at Slow Strain Rate[J]. Development and Application of Materials, 2022, 37(4): 15-20.
    [3]NIU Jicheng, DENG Wanping, WANG Renfu. Microstructure and Properties of Coarse Grain in Heat Affected Zone of 12CrNi5MoV Forged Steel[J]. Development and Application of Materials, 2019, 34(3): 52-58. DOI: 10.19515/j.cnki.1003-1545.2019.03.009
    [4]ZONG Feng, HUO Guangrui, WU Songlin. Analysis on Numerical Simulation for the Twin-Wire SAW Welding Temperature Field[J]. Development and Application of Materials, 2016, 31(4): 51-56. DOI: 10.19515/j.cnki.1003-1545.2016.04.010
    [5]CHEN Xiaomin. Oxidation Mechanism of a Zr-based Bulk Metallic Glass[J]. Development and Application of Materials, 2016, 31(2): 32-36. DOI: 10.19515/j.cnki.1003-1545.2016.02.007
    [6]YANG Jun-feng, FAN Fang-xiong. Study on the law of precipitation during hot working of alloy 825[J]. Development and Application of Materials, 2015, 30(3): 53-60. DOI: 10.19515/j.cnki.1003-1545.2015.03.011
    [7]XU Kuilong, ZHANG Xianfeng. Effect of Dynamic Strain Aging on the Strength of 5083 Al-based Alloy[J]. Development and Application of Materials, 2015, 30(1): 54-57. DOI: 10.19515/j.cnki.1003-1545.2015.01.011
    [8]HUO Guang-rui, KONG Hong-yu, YAO Run-gang, ZHU Bing-kun. Research of FCB(Flux-copper Backing) One-Side SAW Process with Twin-Wire[J]. Development and Application of Materials, 2009, 24(6): 10-14. DOI: 10.19515/j.cnki.1003-1545.2009.06.003
    [9]YANG Xiu-zhi, HUO Guang-rui, YU Sheng-fu, FU Xiu-juan. CTOD Experimental Study of Twin-wire Submerged Arc Welded Joint of High-strength Hull Steel[J]. Development and Application of Materials, 2009, 24(6): 1-5. DOI: 10.19515/j.cnki.1003-1545.2009.06.001
    [10]ZHANG Wen-qin, LEI Zhu-fang. Development of a High Damping Copper Alloy Plate Using in Ships[J]. Development and Application of Materials, 2009, 24(2): 7-12. DOI: 10.19515/j.cnki.1003-1545.2009.02.003

Catalog

    Article Metrics

    Article views (39) PDF downloads (1) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return