WANG Hongbo, LI Jinghan, LI Jingtao. The Influence of Heat Treatment on Microstructure and Properties of 18Cr23MoVRE Cast Steel[J]. Development and Application of Materials, 2015, 30(1): 75-78. DOI: 10.19515/j.cnki.1003-1545.2015.01.017
Citation: WANG Hongbo, LI Jinghan, LI Jingtao. The Influence of Heat Treatment on Microstructure and Properties of 18Cr23MoVRE Cast Steel[J]. Development and Application of Materials, 2015, 30(1): 75-78. DOI: 10.19515/j.cnki.1003-1545.2015.01.017

The Influence of Heat Treatment on Microstructure and Properties of 18Cr23MoVRE Cast Steel

More Information
  • Received Date: September 01, 2014
  • Available Online: March 18, 2024
  • The microstructure and mechanical properties of 18Cr23MoVRE wear-resistant cast steel under different heat treatment condition were studied by series of experiments.The experiment results show that the microstructure of 18Cr23MoVRE wear-resistant cast steel consists of martensite,a small amount of retained austenite and carbide which existed dispersedly on the matrix after different quenching temperature and 300 ℃ tempering treatment.With the increase of quenching temperature,the hardness of the cast steel increases and the toughness decreases.When the quenching temperature is 1 000 ℃ and the tempering temperature is 300 ℃,the hardness reaches to HRC 58.5 and the impact toughness is over 5.0J.Compared with the as-cast steel,the hardness and impact toughness of the steel after quenching and tempering are improved by about 33% and 26%,respectively.
  • Related Articles

    [1]YE Fan, NIU Jicheng, NIE Jianhang, WANG Renfu, DENG Wanping. Research on Heat Treatment Process for Tensile Property Recovery of Cold-Forming 10CrNi5MoV Steel[J]. Development and Application of Materials, 2023, 38(1): 60-65.
    [2]TONG Zhiyuan, GONG Xuhui. Physical Constitutive Model of Tensile Plastic Strain for 10CrNi8MoV Steel[J]. Development and Application of Materials, 2022, 37(5): 11-15.
    [3]XU Lingyu, WANG Yang, WANG Qi, JIANG Peng, LIAO Zhiqian. Study on Compressive Creep Behavior at Room Temperature and Dislocation Type of Ti-6Al-3Nb-2Zr-1Mo Alloy[J]. Development and Application of Materials, 2021, 36(1): 17-23.
    [4]HUANG Dong, XUE Gang, YANG Chaofei. Research on Influence Factors of Hydrogen Diffusion Coefficient of Pure Iron[J]. Development and Application of Materials, 2020, 35(2): 1-4.
    [5]LIU Haitao, WANG Renfu, YANG Jinghong, NIU Jiajia. Research on Bauschinger Effect of 10CrNi5MoV Steel[J]. Development and Application of Materials, 2016, 31(4): 47-50. DOI: 10.19515/j.cnki.1003-1545.2016.04.009
    [6]LUO Xian-fu, CHA Xiao-qin, ZHENG Guo-hua, ZHANG Li-juan, ZHAO Yang. Effects of Aging Process on the Slow Strain Tensile Properties of 2000 Series High Strength Aluminum Alloy[J]. Development and Application of Materials, 2015, 30(4): 24-29. DOI: 10.19515/j.cnki.1003-1545.2015.04.006
    [7]LUO Xian-fu, CHA Xiao-qin, ZHAO Yang, ZHENG Guo-hua, ZHANG Li-juan. Effect of Aging Time on Stress Corrosion Cracking Susceptibility of Al-3.88Cu-1.18Mg-0.31Mn Alloy[J]. Development and Application of Materials, 2015, 30(3): 31-36. DOI: 10.19515/j.cnki.1003-1545.2015.03.007
    [8]SA Shi-yong, YANG Jing-hong. Comparative Study on Properties of Two D36 Bulb Flat Steels for Shipbuilding[J]. Development and Application of Materials, 2013, 28(5): 6-9. DOI: 10.19515/j.cnki.1003-1545.2013.05.002
    [9]GAO Jian-zhong, WANG Chun-fang, WANG Zhang-an, CHEN Hong-da, ZHANG Hong-bo, YANG Zhuan-zhao. Strain Aging Behavior of High Strength Linepipe Steel[J]. Development and Application of Materials, 2009, 24(3): 86-90. DOI: 10.19515/j.cnki.1003-1545.2009.03.021
    [10]LIU Gang, QU Zhan-yuan. Research on Strain-aging Sensibility of 10MnNiCr Steel Plates[J]. Development and Application of Materials, 2007, 22(2): 1-4. DOI: 10.19515/j.cnki.1003-1545.2007.02.001

Catalog

    Article Metrics

    Article views (37) PDF downloads (1) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return