Volume 36 Issue 2
Apr.  2021
Turn off MathJax
Article Contents
Abstract
References
Related Articles
LÜ Chao, LI Feng, SUN Xinyang. Microscopic Analysis of Compression Response of Carbon Fiber Composites[J]. Development and Application of Materials, 2021, 36(2): 26-34.
Citation: LÜ Chao, LI Feng, SUN Xinyang. Microscopic Analysis of Compression Response of Carbon Fiber Composites[J]. Development and Application of Materials, 2021, 36(2): 26-34.
shu

Microscopic Analysis of Compression Response of Carbon Fiber Composites

  • 1. China Academy of Aerospace Aerodynamics, Beijing 100074, China;

  • 2. School of Aeronautics and Astronautics, Harbin Institute of Technology, Harbin 150001, China

More Information
  • Received Date: January 13, 2021
    Graphical Abstract
    • Abstract
  • An experimental platform was designed, and the sensitivity coefficient between the fiber compression strain and the resistance calibrated. The calibrated fibers are made into single-filament and multi-filament composite material system compression test specimens. Under the compressive load conditions, the influence of fiber fracture of multi-filament composite material specimen on surrounding fibers was investigated, and the maximum deformation of the fiber at the fracture was measured accurately. On the above basis, numerical methods were adopted to simulate the damage process of the micro-buckling of fibers around the fracture caused by the stress distribution of the matrix.
    • FullText(HTML)
    • References (9)
  • [1]
    ROSEN W.Mechanics of composite strengthening[J].Fiber Composite Materials,1964:72.
    [2]
    SCHUERCH H.Prediction of compressive strength in uniaxial boron fiber-metal matrix composite materials[J].AIAA J,1966(4):102-106.
    [3]
    LANKFORD J.Compressive failure of fibre-reinforced compoites,buckling,kinking,and the role of the interface[J].Mater.Sci,1995,30:4343-4348.
    [4]
    NARAYANAN S,SCHADLER L S.Assessment of strains along fiber surface features in graphite/epoxy composites loaded in compression[J].Compos.Sci.Technol,1999,59:1589-1596.
    [5]
    NARAYANAN S,SCHADLER L S.Mechanisms of kink-band formation in graphite/epoxy composites:a micromechanical experimental study[J].Compos.Sci.Technol,1999,59:2201-2213.
    [6]
    GARLAND B D,BEYERLEIN I J,SCHADLER L S.The development of compression damag e zones in fibrous composites[J].Compos.Sci.Technol,2001,61:2461-2480.
    [7]
    GOUTIANOS S,PEIJS T,GALIOTIS C.Mechanisms of stress transfer and interface integrity in carbon/epoxy composites undercompression loading Part I:Experimental investigation[J].Solids Struct,2002,39:3217-3231.
    [8]
    阚晋.碳/碳复合材料微细观结构的表征及对有效性能的影响研究[D].哈尔滨:哈尔滨工业大学复合材料与结构研究所,2010:79-97.
    [9]
    张博明.一种单丝纤维压缩性能的测量方法及其装置[P].中国:zl100910072845.02011-09-0.
    • Related Articles

  • Related Articles

    [1]CHENG Yazhen, GUO Jule, QIAO Haibin, SUN Hongzhe, LI Bobo, YANG Xuedong, LIU Yinqi. Study on Investment Casting Process of Rod Titanium Alloy Castings Based on Numerical Simulation[J]. Development and Application of Materials, 2022, 37(5): 37-44.
    [2]YANG Qingyun, YUAN Wei, MA Junpu, ZHANG Zhiyuan. Numerical Simulation and Process Optimization on Hot Forming for CuNi90/10 Sock Welding Tee[J]. Development and Application of Materials, 2021, 36(6): 26-30,35.
    [3]WANG Donghui, CHEN Zhenhua, WANG Shaogang. Numerical Simulation and Process Optimization on Electron Beam Welding of Al-Li Alloy[J]. Development and Application of Materials, 2020, 35(1): 58-67.
    [4]XU Guangchen, LIU Zhixin, CUI Yu. Numerical Simulation Analysis in Thermal Processes of Spur Gears[J]. Development and Application of Materials, 2016, 31(3): 101-107. DOI: 10.19515/j.cnki.1003-1545.2016.03.019
    [5]SHAO Fei, REN Fang-jie, CHANG Lei, ZHANG Yong-feng. Numerical Simulation Research on the Process of Hot Neck-spining Formation for the Seamless Cylinder[J]. Development and Application of Materials, 2013, 28(3): 102-106. DOI: 10.19515/j.cnki.1003-1545.2013.03.023
    [6]WU Song-lin, LI De-qiang, SHAO Fei, DENG Chun-feng. Numerical Simulation Research on the Process of Multi-path Hot Neck-spinning Formation for the Cylinder[J]. Development and Application of Materials, 2012, 27(4): 7-12. DOI: 10.19515/j.cnki.1003-1545.2012.04.003
    [7]SUN Shi-qing. Damage and Magnetization of Ferrite Fibres[J]. Development and Application of Materials, 2012, 27(1): 56-61,66. DOI: 10.19515/j.cnki.1003-1545.2012.01.014
    [8]CHENG Yong-ming, JIAO Gui-qiong, WANG Bo. Characterization of Damage Resistance of Carbon Fiber Reinforced Composite Laminates[J]. Development and Application of Materials, 2011, 26(3): 62-65. DOI: 10.19515/j.cnki.1003-1545.2011.03.017
    [9]ZHANG Ya-jun, LI Yong-jun, ZHANG Li-juan. Damage Characteristics of Three Types of Elastic Modulus in the Course of Low Cycle Fatigue[J]. Development and Application of Materials, 2010, 25(1): 19-22. DOI: 10.19515/j.cnki.1003-1545.2010.01.006
    [10]LIU Huai-xi, HE Yue-jin, ZHANG Heng. Structure Simulative Experiment by Using Acoustic Emission to Detect the Damage and Fracture in Composite Flywheel[J]. Development and Application of Materials, 2004, 19(4): 4-8. DOI: 10.19515/j.cnki.1003-1545.2004.04.002

  • Cited by

    Periodical cited type(1)

    1. 王健. 碳纤维管状复合材料力学性能分析及测试方法优化. 合成纤维. 2022(02): 51-53+57 .

    Other cited types(0)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (377) PDF downloads (24) Cited by(1)
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return