Volume 38 Issue 2
Apr.  2023
Turn off MathJax
Article Contents
Abstract
References
Related Articles
SHI Xinxin, YAN Dong, WANG Wei, HAN Linju, ZHANG Shuaifei. Study on Channel Structure Optimization of Printed Circuit Heat Exchanger[J]. Development and Application of Materials, 2023, 38(2): 53-56.
Citation: SHI Xinxin, YAN Dong, WANG Wei, HAN Linju, ZHANG Shuaifei. Study on Channel Structure Optimization of Printed Circuit Heat Exchanger[J]. Development and Application of Materials, 2023, 38(2): 53-56.
shu

Study on Channel Structure Optimization of Printed Circuit Heat Exchanger

  • Luoyang Ship Material Research Institute, Luoyang 471000, China

More Information
  • Received Date: August 16, 2022
  • Available Online: May 05, 2023
    Graphical Abstract
    • Abstract
  • The printed circuit heat exchanger (PCHE) is welded by diffusion welding, but the existence of the heat exchange flow channel causes the interruption of the transmission of welding pressure along the heat exchange plate, resulting in the non-welding in the middle of the flow channel. In order to improve the welding quality, the optimization of the runner structure is carried out. The research results show that increasing the chamfer of the rectangular runner is beneficial to improve the welding quality. Dislocation of the hot and cold runners (to place the lower runner aid plate in the middle of the upper runner) can also change the axial stress distribution between the plates to improve the welding quality.
    • FullText(HTML)
    • References (8)
  • [1]
    LEE S M, KIM K Y. Comparative study on performance of a zigzag printed circuit heat exchanger with various channel shapes and configurations[J]. Heat and Mass Transfer, 2013, 49(7):1021-1028.
    [2]
    CHEN M H, SUN X D, CHRISTENSEN R N, et al. Pressure drop and heat transfer characteristics of a high-temperature printed circuit heat exchanger[J]. Applied Thermal Engineering, 2016, 108:1409-1417.
    [3]
    PAUL B K, KWON P, SUBRAMANIAN R. Understanding limits on fin aspect ratios in counterflow microchannel arrays produced by diffusion bonding[J]. Journal of Manufacturing Science and Engineering, 2006, 128(4):977-983.
    [4]
    王志鑫, 党开放, 张亚军, 等. 微换热通道的几何特性对多孔微型换热器传热特性的影响[J]. 化工机械, 2012, 39(4):482-486.
    [5]
    唐凌虹, 杨博皓, 李文军. 轴向导热对印刷电路板式换热器换热性能影响[J]. 工程热物理学报, 2022, 43(4):1055-1062.
    [6]
    张海燕, 郭江峰, 淮秀兰, 等. PCHE内轴向导热对局部换热性能的影响研究[J]. 化工学报, 2019, 70(12):4590-4598.
    [7]
    刘海建, 杨旭东, 孔振, 等. TC4钛合金舵面扩散焊有限元模拟及工艺研究[J]. 航天制造技术, 2018(1):12-16.
    [8]
    赵杰, 李峰, 吕涛, 等. 基于ANSYS的FeCrAl合金真空扩散焊模拟[J]. 新技术新工艺, 2012(1):61-65.
    • Related Articles

  • Related Articles

    [1]ZHANG Guitao, HUANG Xiang, HOU Bingyu, WANG Mingzhi. Determination of Material Properties of Al 2024-T3 Aluminum Alloy Using Nano-indentation Experiment and Interval Optimization[J]. Development and Application of Materials, 2023, 38(6): 41-51.
    [2]DUAN Yongqi, ZHAO Zhenping, WANG Yanfei, XU Chen, QIN Junfei. Optimization Design of Impact Load Testing Tool for Nylon Locking Sleeve[J]. Development and Application of Materials, 2021, 36(6): 44-48.
    [3]FU Jianjun. Study on 3D Printing Process Optimization of ABS Plastics[J]. Development and Application of Materials, 2021, 36(3): 42-45.
    [4]WANG Jinwei, SONG Jinpeng, LUO Wen, KANG Fenghui. Design and Optimization of A-level Fireproof Structure of Sandwich Composite[J]. Development and Application of Materials, 2019, 34(5): 40-44. DOI: 10.19515/j.cnki.1003-1545.2019.05.009
    [5]LI Jin, LI Yankai, ZHANG Hui, LIU Shu. Optically Designing of the Brace for Supporting Explosive Welding Clad Plate During Heat Treatment[J]. Development and Application of Materials, 2019, 34(4): 70-73,77. DOI: 10.19515/j.cnki.1003-1545.2019.04.013
    [6]DING Liang, LIN Guoxing, ZHANG Mingxia. Performance Optimization of Composite Constrained Viscoelastic Structure with Stand-off Layer[J]. Development and Application of Materials, 2017, 32(4): 113-121. DOI: 10.19515/j.cnki.1003-1545.2017.04.018
    [7]YANG Qing-song, LEI Du-min, XIE Xiao-jun, YE Zhang-ji. Optimization of Sacrificial Anodes in Slop Retention Tanks of Ship[J]. Development and Application of Materials, 2012, 27(2): 59-63. DOI: 10.19515/j.cnki.1003-1545.2012.02.014
    [8]WANG Man-chang, SHI Jun-hu, PEI Peng-yu, LU Shu-jian. Overview of Wind Turbine Blade Structural Style and Optimization[J]. Development and Application of Materials, 2011, 26(3): 84-86. DOI: 10.19515/j.cnki.1003-1545.2011.03.022
    [9]YIN Xie-zhen, YU Dong, JIANG Hong-yuan, AO Hong-rui, YAN Hui. Optimization Design of and Strength Checking UAV’s Variable-Geometry Structure[J]. Development and Application of Materials, 2011, 26(3): 70-73. DOI: 10.19515/j.cnki.1003-1545.2011.03.019
    [10]CHEN Jian-jian, HAO Wan-jun. Optimization Design of λ/4-Type Dielectric Absorber[J]. Development and Application of Materials, 2009, 24(6): 84-88. DOI: 10.19515/j.cnki.1003-1545.2009.06.021

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (131) PDF downloads (28) Cited by()
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return