Citation: | ZHU Hai, WANG Honghong, WANG Yangwen, ZHANG Shuchang, DU Zhuotong, ZHA Xiaoqin. Relationship between Vickers Hardness and Strength of High Manganese Austenitic Cryogenic Steel for LNG[J]. Development and Application of Materials, 2024, 39(5): 63-69. |
[1] |
孙淑侠. LNG低温高锰奥氏体钢材料应用研究概述[J]. 武汉船舶职业技术学院学报, 2021, 20(4): 144-148.
|
[2] |
黄维, 张志勤, 高真凤. 石油及LNG储罐用钢现状及最新研究进展[J]. 上海金属, 2016, 38(2): 74-78.
|
[3] |
王从曾. 材料性能学[M]. 北京: 北京工业大学出版社, 2001: 48-54.
|
[4] |
TIRYAKIOǦLU M. On the relationship between Vic-kers hardness and yield stress in Al-Zn-Mg-Cu Alloys[J]. Materials Science and Engineering: A, 2015, 633: 17-19.
|
[5] |
TIRYAKIOǦLU M, ROBINSON J S, SALAZARGU-APURICHE M A, et al. Hardness-strength relationships in the aluminum alloy 7010[J]. Materials Science and Engineering: A, 2015, 631: 196-200.
|
[6] |
HASHEMI S H. Strength-hardness statistical correlation in API X65 steel[J]. Materials Science and Engineering: A, 2011, 528(3): 1648-1655.
|
[7] |
张海芹,王旭峰,渠静雯,等. Zr-4合金包壳管维氏硬度与强度关系研究[J]. 钛工业进展, 2023, 40(6): 36-40.
|
[8] |
温识博,朱红林,刘刚.超高强钢的维氏硬度与抗拉强度的相关分析和回归分析[J].宝钢技术,2022, (05):7-11.
|
[9] |
陈冰川, 李光福, 杨武. 奥氏体不锈钢里氏硬度、维氏硬度及强度之间的换算关系[J]. 机械工程材料, 2009, 33(9): 37-40.
|
[10] |
国家质量技术监督局. 黑色金属硬度及强度换算值: GB/T 1172—1999[S]. 北京: 中国标准出版社, 2005.
|
[11] |
徐祖耀, 黄本立. 中国材料工程大典. 第26卷: 材料表征与检测技术[M]. 北京: 化学工业出版社, 2005.
|