ZHU Chen, JIN Ying, LIU Xiaoying, ZHANG Juanrong, YUAN Ya, LIU Wen. Effect of Tension on Shape and Microstructure and Properties of 2Cr13 Steel Strip of High Width-thickness Ratio[J]. Development and Application of Materials, 2020, 35(2): 39-42.
Citation: ZHU Chen, JIN Ying, LIU Xiaoying, ZHANG Juanrong, YUAN Ya, LIU Wen. Effect of Tension on Shape and Microstructure and Properties of 2Cr13 Steel Strip of High Width-thickness Ratio[J]. Development and Application of Materials, 2020, 35(2): 39-42.

Effect of Tension on Shape and Microstructure and Properties of 2Cr13 Steel Strip of High Width-thickness Ratio

More Information
  • Received Date: October 15, 2019
  • Available Online: March 17, 2024
  • The influences of increasing the tension on eliminating the shape defect and the mechanical properties of the 2 Cr13 steel strip cold rolled during the continuous heat treatment were studied. It's found that when the tension loaded on the steel strip was less than 73.5 N, the mechanical properties of the strip didn't change obviously, and the tension could also reduce the lateral bending and warpage of the steel strip effectively, so as to improve the flatness of the steel strip.
  • Related Articles

    [1]SUN Shaohua, DONG Shengchao, REN Guanpeng, QIU Shengwen, GUO Ning. Delamination Numerical Simulation and Stamping Test of Copper-Steel Clad Plate Half Bend[J]. Development and Application of Materials, 2021, 36(2): 39-43.
    [2]HUANG Anqi, LI Xuefeng, GAO Lingqing, GUO Haixia. Analysis on Bending Cracking of 2205 Stainless Steel Plate after Intergranular Corrosion Experiment[J]. Development and Application of Materials, 2019, 34(5): 1-5,15. DOI: 10.19515/j.cnki.1003-1545.2019.05.001
    [3]LI Chong, GONG Xuhui, WANG Renfu. Study on Fatigue Surface Crack Propagation of 10Ni5CrMoV Steel under Biaxial Bending Stress[J]. Development and Application of Materials, 2017, 32(3): 5-10. DOI: 10.19515/j.cnki.1003-1545.2017.03.002
    [4]XUE Xu-bin, KONG Hong-yu. Effect of Heat Treatment Temperature on Microstructure and Mechanical Properties of SPCC Cold Rolled Steel Strip[J]. Development and Application of Materials, 2015, 30(4): 12-15. DOI: 10.19515/j.cnki.1003-1545.2015.04.003
    [5]ZHU Chen, WANG Bo-jian. Wear Resistance of Super Narrow 2Cr13 Steel Strip[J]. Development and Application of Materials, 2015, 30(2): 48-51. DOI: 10.19515/j.cnki.1003-1545.2015.02.010
    [6]LI Li, XIE Shu-feng, WANG De-yi. Effects of Bending Strain on Critical Current of Bi2223/Ag Tapes[J]. Development and Application of Materials, 2012, 27(2): 47-50. DOI: 10.19515/j.cnki.1003-1545.2012.02.012
    [7]LIU Zhao, HU Cheng-yun, CHEN Mao-lin, LI An-hu, YU Yan-lei. Research on Mechanical Properties of a New Light-induced Bending Polymer[J]. Development and Application of Materials, 2008, 23(6): 43-45. DOI: 10.19515/j.cnki.1003-1545.2008.06.012
    [8]CHEN Ai-zhi, LIU Yu, NIU Ji-cheng, YI Chuan-bao. A Discussion of Bend Diameter in Bend Test of 10CrNi3MoV Steel Welded Joints[J]. Development and Application of Materials, 2007, 22(5): 1-3. DOI: 10.19515/j.cnki.1003-1545.2007.05.001
    [9]Zhou Yun, Bao Yefeng, Lou Songnian, Wu Yixiong. Bend Performance of High Current MAG Welding Joints[J]. Development and Application of Materials, 2003, 18(4): 9-12. DOI: 10.19515/j.cnki.1003-1545.2003.04.003
    [10]Qian Weiping, Li Gang, Ma Jianpo. Determination of the Weakness Zone of Welding Joint by doing Four-Point Bend Testing[J]. Development and Application of Materials, 2000, 15(2): 23-25. DOI: 10.19515/j.cnki.1003-1545.2000.02.006

Catalog

    Article Metrics

    Article views (54) PDF downloads (2) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return