Volume 38 Issue 6
Dec.  2023
Turn off MathJax
Article Contents
Abstract
References
Related Articles
ZHANG Tianyi, LÜ Shasha, RUAN Zhangshun, FU Xiaogang, LONG Bin, TAO Liu, QIN Bo, LI Zhengcao. Research on Preparation of Stellite Alloy Coating and Its Compatibility with Liquid Lead-Bismuth Eutectic Alloy[J]. Development and Application of Materials, 2023, 38(6): 9-14.
Citation: ZHANG Tianyi, LÜ Shasha, RUAN Zhangshun, FU Xiaogang, LONG Bin, TAO Liu, QIN Bo, LI Zhengcao. Research on Preparation of Stellite Alloy Coating and Its Compatibility with Liquid Lead-Bismuth Eutectic Alloy[J]. Development and Application of Materials, 2023, 38(6): 9-14.
shu

Research on Preparation of Stellite Alloy Coating and Its Compatibility with Liquid Lead-Bismuth Eutectic Alloy

  • 1. School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China;

  • 2. College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875, China;

  • 3. Reactor Engineering Technology Research Institute, China Institute of Atomic Energy, Beijing 102413, China

More Information
  • Received Date: April 18, 2023
  • Available Online: January 09, 2024
    Graphical Abstract
    • Abstract
  • The lead-bismuth fast reactor uses liquid lead-bismuth alloy as the coolant, which has high safety and promising development prospects as Generation Ⅳ. In this study, we mainly focus on the lead-bismuth corrosion resistant coatings. The Stellite alloy coatings are prepared on the austenitic stainless steel substrates, whose composition and microstructure are analyzed. The lead-bismuth corrosion resistance experiment of the coating is carried out to analyze its structural integrity, mechanical properties, surface oxide layer, and phase composition changes. The lead-bismuth corrosion resistance of the Stellite alloy coating is evaluated by characterizing the microstructure and mechanical properties to provide theoretical and technical support for the engineering application of the lead-bismuth fast reactors.
    • FullText(HTML)
    • References (11)
  • [1]
    赵熹, 陈映雪, 曾献, 等. 一种铅基快堆用高硅不锈钢的热处理工艺优化及铅铋相容性研究[J]. 工程科学学报, 2020, 42(11):1488-1498.
    [2]
    ZHANG J S. A review of steel corrosion by liquid lead and lead-bismuth[J]. Corrosion Science, 2009, 51(6):1207-1227.
    [3]
    FERRÉ F G, MAIROV A, IADICICCO D, et al. Corrosion and radiation resistant nanoceramic coatings for lead fast reactors[J]. Corrosion Science, 2017, 124:80-92.
    [4]
    SHORT M P, BALLINGER R G, HÄNNINEN H E. Corrosion resistance of alloys F91 and Fe-12Cr-2Si in lead-bismuth eutectic up to 715℃[J]. Journal of Nuclear Materials, 2013, 434(1-3):259-281.
    [5]
    KIESER M, MUSCHER H, WEISENBURGER A, et al. Liquid metal corrosion/erosion investigations of structure materials in lead cooled systems:part 1[J]. Journal of Nuclear Materials, 2009, 392(3):405-412.
    [6]
    KONDO M, TAKAHASHI M, SUZUKI T, et al. Metallurgical study on erosion and corrosion behaviors of steels exposed to liquid lead-bismuth flow[J]. Journal of Nuclear Materials, 2005, 343(1-3):349-359.
    [7]
    FETZER R, WEISENBURGER A, JIANU A, et al. Oxide scale formation of modified FeCrAl coatings exposed to liquid lead[J]. Corrosion Science, 2012, 55:213-218.
    [8]
    ZHANG J S, LI N. Review of the studies on fundamental issues in LBE corrosion[J]. Journal of Nuclear Materials, 2008, 373(1-3):351-377.
    [9]
    鞠娜, 雷玉成, 陈钢, 等. 410不锈钢在550℃流动的铅铋共晶合金中的腐蚀行为[J]. 材料导报, 2019, 33(20):3489-3493.
    [10]
    王凯琳, 李良星, 张双雷, 等. 轴流铅铋泵的设计及其水力性能分析[J]. 西安交通大学学报, 2020, 54(11):166-174.
    [11]
    CHARALAMPOPOULOU E, LAMBRINOU K, VAN DER DONCK T, et al. Early stages of dissolution corrosion in 316L and DIN 1.4970 austenitic stainless steels with and without anticorrosion coatings in static liquid lead-bismuth eutectic (LBE) at 500℃[J]. Materials Characterization, 2021, 178:111234.
    • Related Articles

  • Related Articles

    [1]ZOU Yi-le, GAO Chao. Heat Setting and Mechanical Property Analysis of U-shaped Nickel-titanium Alloy Wire[J]. Development and Application of Materials, 2022, 37(2): 50-55.
    [2]WANG Xiaohua, SUN Lei, XIN Bao, WANG Jun. Analysis on Interface Structure and Performance of Ultrathin Aluminum Alloy-Steel Composite Transition Joint of Welding State[J]. Development and Application of Materials, 2020, 35(6): 70-74,87.
    [3]WU Xiaofei, DUAN Mengqiang, WU Yukun, WANG Qi, JIANG Peng. Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti5211 Plates[J]. Development and Application of Materials, 2020, 35(4): 11-13,23.
    [4]HUANG Wei, WANG Shaogang, LI Lize, JIN Yang. Laser Beam Welding of Titanium Alloy and Microstructure and Mechanical Properties of Welded Joint[J]. Development and Application of Materials, 2019, 34(2): 20-27. DOI: 10.19515/j.cnki.1003-1545.2019.02.004
    [5]JIANG Lihua, TIAN Junqiang, ZHANG Lijun, ZHOU Zhongbo. Effect of Heat Treatment on Mechanical Properties of TC11 Titanium Alloy at Room Temperature[J]. Development and Application of Materials, 2017, 32(4): 38-43. DOI: 10.19515/j.cnki.1003-1545.2017.04.006
    [6]XUE Xu-bin, KONG Hong-yu. Effect of Heat Treatment Temperature on Microstructure and Mechanical Properties of SPCC Cold Rolled Steel Strip[J]. Development and Application of Materials, 2015, 30(4): 12-15. DOI: 10.19515/j.cnki.1003-1545.2015.04.003
    [7]WANG Mei-jiao, MENG Xiang-jun, LIAO Zhi-qian. The Effect of Heat Treatment on Structure and Properties of Titanium Alloy Ti-10V-2Fe-3Al[J]. Development and Application of Materials, 2012, 27(5): 28-32. DOI: 10.19515/j.cnki.1003-1545.2012.05.008
    [8]LOU Guan-tao. Influence of the Double Heat Treatment on the Mechanical Properties and Microstructure of ZTC4 Cast Titanium Alloy Material[J]. Development and Application of Materials, 2010, 25(4): 40-43. DOI: 10.19515/j.cnki.1003-1545.2010.04.010
    [9]WANG Bing, SUN She-ying. An Investigation on the Influence of Molecular Structure upon Dynamic Mechanical Properties of Polymer Materials[J]. Development and Application of Materials, 2005, 20(3): 42-46. DOI: 10.19515/j.cnki.1003-1545.2005.03.013
    [10]Liu Yinqi, Meng Xiangjun, Li Deqin, Wang Xinping, Li Qimin. Effects of Heat-treatment on the Microstructure and Mechanical Property of Ti-Al-Zr-Fe Alloy[J]. Development and Application of Materials, 2001, 16(3): 16-18,26. DOI: 10.19515/j.cnki.1003-1545.2001.03.005

  • Cited by

    Periodical cited type(0)

    Other cited types(1)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (139) PDF downloads (43) Cited by(1)
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return