Volume 39 Issue 2
Apr.  2024
Turn off MathJax
Article Contents
Abstract
References
Related Articles
XU Lingyu, MA Borong, LI Chong, SONG Dejun, CHEN Chunyang, SUN Xiaoyi. Effect of Heat Treatment on Microstructure and Mechanical Properties of TiB95 Alloy Petroleum Pipes[J]. Development and Application of Materials, 2024, 39(2): 63-67,88.
Citation: XU Lingyu, MA Borong, LI Chong, SONG Dejun, CHEN Chunyang, SUN Xiaoyi. Effect of Heat Treatment on Microstructure and Mechanical Properties of TiB95 Alloy Petroleum Pipes[J]. Development and Application of Materials, 2024, 39(2): 63-67,88.
shu

Effect of Heat Treatment on Microstructure and Mechanical Properties of TiB95 Alloy Petroleum Pipes

  • Luoyang Ship Material Research Institute, Luoyang 471023, China

More Information
  • Received Date: September 29, 2022
  • Available Online: May 08, 2024
    Graphical Abstract
    • Abstract
  • In order to meet the demand for titanium alloy petroleum pipes under the harsh oil and gas exploitation environment, the TiB95 alloy is developed, which belongs to Al-Mo-Zr alloys. The effects of different heat treatment processes on the metallographic structure, mechanical properties and impact fracture morphologies of the TiB95 alloy petroleum pipes are studied by means of metallographic microscope, tensile testing machine, impact testing machine and scanning electron microscope. The results show that when the heat treatment temperature is 900 ℃, the TiB95 alloy petroleum pipes cooled at low rate (furnace cooling) have coarser structure, lower strength and higher toughness. When the cooling rate (air cooling) is the same, the α phase morphologies of the TiB95 alloy petroleum pipes heat treated at high temperature changes, the strength of the alloy reduces, and the elongation increases. The TiB95 alloy petroleum pipes with high strength and toughness can be obtained by using the 960 ℃,90 min,air cooling heat treatment process. The impact fracture surfaces of the TiB95 alloy petroleum pipes by different heat treatment processes are dimple morphology, which is ductile fracture.
    • FullText(HTML)
    • References (19)
  • [1]
    李冲, 陶欢, 宋德军, 等. 钛合金在高含硫化氢工况中的腐蚀性能研究[J]. 材料开发与应用, 2020, 35(6):19-23.
    [2]
    刘强, 赵密锋, 祝国川, 等. 热处理对石油管材用Ti-6Al-4V-0.5Ni-0.05Ru钛合金组织和性能的影响[J]. 稀有金属材料与工程, 2021, 50(7):2557-2567.
    [3]
    孙建刚, 宋德军. 国内外石油、天然气用钛合金研究及应用概况[J]. 材料开发与应用, 2019, 34(6):96-102.
    [4]
    周晓锋, 孙宇, 张传友, 等. TP-Ti-110钢级TP-G2(Ti)特殊螺纹钛合金油管的研发[J]. 钢管, 2019, 48(1):20-23.
    [5]
    何石磊, 骆鸿, 董超, 等. 钛合金在高温盐酸中腐蚀行为研究[J]. 焊管, 2021, 44(9):1-6.
    [6]
    刘强, 惠松骁, 汪鹏勃, 等. 油气开采用钛合金石油管材料耐腐蚀性能研究[J]. 稀有金属材料与工程, 2020, 49(4):1427-1436.
    [7]
    SCHUTZ R W, WATKINS H B. Recent developments in titanium alloy application in the energy industry[J]. Materials Science and Engineering:A, 1998, 243(1-2):305-315.
    [8]
    胡辛禾. 钛合金钻杆:短半径水平钻井最佳选择[J]. 石油机械, 2000, 28(6):61.
    [9]
    GONZALEZ M, MASKOS K, HARGRAVE R, et al. Titanium alloy tubing for HPHT applications[C]//All Days. Denver, Colorado, USA. SPE, 2008.
    [9]
    GONZALEZ M, MASKOS K, HARGRAVE R, et al. Titanium alloy tubing for HPHT applications[C]//All Days. Denver, Colorado, USA. SPE, 2008.
    [10]
    李周波, 赵勇, 高盟召, 等. 热处理工艺对钛合金油管组织与性能的影响[J]. 钢铁钒钛, 2021, 42(1):50-54.[
    [10]
    李周波, 赵勇, 高盟召, 等. 热处理工艺对钛合金油管组织与性能的影响[J]. 钢铁钒钛, 2021, 42(1):50-54.
    [11]
    张明玉, 运新兵, 伏洪旺. 热处理冷却方式对TC10钛合金组织与性能的影响[J]. 金属热处理, 2022, 47(8):98-105.
    [12]
    胡庚祥, 蔡珣, 戎咏华, 等. 材料科学与工程[M]. 上海:上海交通大学出版社, 2001.
    [13]
    李文渊, 刘建荣, 陈志勇, 等. Ti60合金板材的室温强度与其显微组织和织构的关系[J]. 材料研究学报, 2018, 32(6):455-463.
    [14]
    吴汐玥, 陈志勇, 程超, 等. 热处理对Ti65钛合金板材的显微组织、织构及拉伸性能的影响[J]. 材料研究学报, 2019, 33(10):785-793.
    [15]
    卢凯凯, 周立鹏, 李敏娜, 等. 强韧化热处理对TA15钛合金组织和性能的影响[J]. 材料热处理学报, 2020, 41(1):44-49.
    [16]
    徐戊矫, 谭玉全, 龚利华, 等. 退火温度和冷却速率对TC4钛合金组织和性能的影响[J]. 稀有金属材料与工程, 2016, 45(11):2932-2936.
    [17]
    WU C, ZHAO Y Q, HUANG S X, et al. Microstructure tailoring and impact toughness of a newly developed high strength Ti-5Al-3Mo-3V-2Cr-2Zr-1Nb-1Fe alloy[J]. Materials Characterization, 2021, 175:111103.
    • Related Articles

  • Related Articles

    [1]MA Xiaoyang, LI Zhi, XUE Gang, WU Yanming. Study on the Distribution Heterogeneity of Alloy Elements in Laser-GMAW Hybrid Welding[J]. Development and Application of Materials, 2020, 35(5): 87-91.
    [2]YANG Shuo, ZHANG Dashuai, XUE Jianqiang, SHI Linpu, ZHAO Yanfei. Oxygen Inhibition Study on Surface of ITO Green Body Prepared by Gel-casting with Low Toxicity System[J]. Development and Application of Materials, 2020, 35(5): 54-58.
    [3]WANG Donghui, CHEN Zhenhua, WANG Shaogang. Numerical Simulation and Process Optimization on Electron Beam Welding of Al-Li Alloy[J]. Development and Application of Materials, 2020, 35(1): 58-67.
    [4]MA Xiaoyang, LI Zhi, XUE Gang, WU Yanming. Study on Influence of Relative Position of Thermal Source of Laser-Arc Hybrid Welding on Composition and Properties of Welded Joint[J]. Development and Application of Materials, 2018, 33(1): 36-42. DOI: 10.19515/j.cnki.1003-1545.2018.01.007
    [5]ZONG Feng, HUO Guangrui, WU Songlin. Analysis on Numerical Simulation for the Twin-Wire SAW Welding Temperature Field[J]. Development and Application of Materials, 2016, 31(4): 51-56. DOI: 10.19515/j.cnki.1003-1545.2016.04.010
    [6]XING Shaohua, ZHANG Bo, YAN Yonggui, SUN Mingxian. The Influence of Coating Damage on Cathodic Protection Potential Distribution of Ship[J]. Development and Application of Materials, 2016, 31(1): 69-73. DOI: 10.19515/j.cnki.1003-1545.2016.01.016
    [7]YANG Shu. Research on Heat Source Model and Numerical Simulation of High Frequency Induction Heating Forming[J]. Development and Application of Materials, 2015, 30(4): 20-23. DOI: 10.19515/j.cnki.1003-1545.2015.04.005
    [8]SUN Wei, LI Jing-yong, WANG Yan-hui. Numerical Smulation of Temperature Field in Friction Stir Welding of Pure Aluminum[J]. Development and Application of Materials, 2014, 29(6): 44-49. DOI: 10.19515/j.cnki.1003-1545.2014.06.008
    [9]DOU Qiu-fang, GONG Yun-zhao, YANG Jun, CHEN Xian-min. Research on Static-strength Statistical Distribution Characteristics of 2024 Aluminum Alloy Friction Stir Welding Joints[J]. Development and Application of Materials, 2013, 28(5): 29-32. DOI: 10.19515/j.cnki.1003-1545.2013.05.008
    [10]ZHANG Cheng, ZHANG Bo-ming, WANG Yong-gui, LIANG Xian-zhu, YUE Guang-quan, JIANG Peng. Refined Simulation on Curing Temperature Field of Composite Structures[J]. Development and Application of Materials, 2010, 25(3): 41-46. DOI: 10.19515/j.cnki.1003-1545.2010.03.010

  • Cited by

    Periodical cited type(1)

    1. 高宇昊，王佳，朱官朋，房坤，翟建飞. 柔度法测算三点弯曲试样疲劳裂纹长度的影响因素. 理化检验-物理分册. 2024(03): 4-9+15 .

    Other cited types(0)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (130) PDF downloads (14) Cited by(1)
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return