CHEN Yatao, ZHENG Fei, KOU Cheng. Study on Microstructure and Properties of Hyper Duplex Stainless Steel CD3MWN[J]. Development and Application of Materials, 2020, 35(3): 1-5,15.
Citation: CHEN Yatao, ZHENG Fei, KOU Cheng. Study on Microstructure and Properties of Hyper Duplex Stainless Steel CD3MWN[J]. Development and Application of Materials, 2020, 35(3): 1-5,15.

Study on Microstructure and Properties of Hyper Duplex Stainless Steel CD3MWN

More Information
  • Received Date: November 06, 2019
  • Available Online: March 13, 2024
  • The effects of different solution treatment temperatures on the microstructure and properties of hyper duplex stainless steel CD3 MWN are studied. The results show that there are a lot of precipitated phases in the as cast steel. Sigma phase cannot be completely eliminated at 1 060℃. When the solution temperatures are between 1 080~1 120℃, the ferrite content can reach 55%~57%. When the solution temperature increases from 1 060℃ to 1 100℃, the tensile strength and hardness decrease gradually, and the impact performance improves gradually. When the solution temperature increases from 1 100℃ to 1 140℃, the tensile strength and hardness increase gradually, and the impact performance decreases gradually. The pitting and crevice corrosion resistance of CD3 MWN steel is better than those of CD3 MN and CN7 MS steel.
  • Related Articles

    [1]HE Yixuan, LIU Haoxiang, LI Mingyang, LIU Xudong, LI Jinshan. Effect of Ti Content on Microstructure and Mechanical Properties of the Co39.2Ni39.2Al21.6-xTixDual-phase High Entropy Alloys[J]. Development and Application of Materials, 2024, 39(5): 55-62.
    [2]WANG Yinghui, SUN Xulu, ZHA Xiaoqin. Comparative Study on Microstructure and Performance of 2205 Dual-phase Stainless Steel Rolled Composite Plate with Different Compression Ratios[J]. Development and Application of Materials, 2022, 37(6): 71-75,101.
    [3]ZHA Xiaoqin, REN Yongfeng, HEI Penghui, ZHAI Zhiliang. Causes and Control of Welding Problems of Duplex Stainless Steel[J]. Development and Application of Materials, 2019, 34(5): 59-65. DOI: 10.19515/j.cnki.1003-1545.2019.05.013
    [4]JI Bo, SUN Jifeng. Influence of Solution and Aging Temperature on Microstructures and Mechanical Properties of 7715D Titanium Alloy[J]. Development and Application of Materials, 2019, 34(1): 36-44. DOI: 10.19515/j.cnki.1003-1545.2019.01.008
    [5]CHEN Yatao, ZHONG Yuping, GUO Xuzhen, LI Jingyin. Casting Process Design and Practice on Diffuser with Duplex Stainless Steel[J]. Development and Application of Materials, 2019, 34(1): 28-32. DOI: 10.19515/j.cnki.1003-1545.2019.01.006
    [6]HAO Xiaobo, ZHANG Qiang, LI Bobo, LIU Yinqi, LI Yang. Effect of High Temperature Annealing in α + β Phase Region on Microstructure and Mechanical Properties of Ti80 Alloy Plates[J]. Development and Application of Materials, 2018, 33(1): 49-53. DOI: 10.19515/j.cnki.1003-1545.2018.01.008
    [7]SHI Xiaoyun, HAO Fang, ZHANG Xiaoyuan, LEI Jinwen, LOU Meiqi, WANG Jinli. Influence of Deformation on Microstructures and Mechanical Properties of TC25 Titanium Alloy Cake Billet[J]. Development and Application of Materials, 2017, 32(5): 28-32. DOI: 10.19515/j.cnki.1003-1545.2017.05.006
    [8]ZHANG Wenli, CHA Xiaoqin, LUO Xianfu, LIU Xiaoyong. Effects of the Microstructure of AA 5083 H116 Plate on Its Corrosion Behavior[J]. Development and Application of Materials, 2017, 32(1): 6-11. DOI: 10.19515/j.cnki.1003-1545.2017.01.002
    [9]LIU Xiao-wen, WANG Jun-min, GUO Jing-jie, WU Lun-fa. Super Duplex Stainless Steel Weld Phase Ratio Influencing Factors[J]. Development and Application of Materials, 2011, 26(6): 8-11. DOI: 10.19515/j.cnki.1003-1545.2011.06.003
    [10]CHEN Yi, JIANG Li-jun. Study on Ti/Mn-Based Laves Phase Hydrogen Storage Alloys[J]. Development and Application of Materials, 2005, 20(3): 17-21. DOI: 10.19515/j.cnki.1003-1545.2005.03.006

Catalog

    Article Metrics

    Article views (60) PDF downloads (8) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return