LIU Xianghong, WU Cong, HE Weiping, TANG Min, JIANG Peng, YU Wei, YANG Shengli, YANG Jing, LEI Fan, WANG Kaixuan, ZHAO Xiaohua, CHEN Haisheng. Study on Strengthening and Toughening Mechanisms of Ti80 Alloy Based on Microstructure Regulation[J]. Development and Application of Materials, 2024, 39(4): 28-37.
Citation: LIU Xianghong, WU Cong, HE Weiping, TANG Min, JIANG Peng, YU Wei, YANG Shengli, YANG Jing, LEI Fan, WANG Kaixuan, ZHAO Xiaohua, CHEN Haisheng. Study on Strengthening and Toughening Mechanisms of Ti80 Alloy Based on Microstructure Regulation[J]. Development and Application of Materials, 2024, 39(4): 28-37.

Study on Strengthening and Toughening Mechanisms of Ti80 Alloy Based on Microstructure Regulation

More Information
  • Received Date: January 07, 2024
  • Available Online: September 11, 2024
  • Ti80 alloy is a corrosion-resistant weldable near-α titanium alloy independently developed by China. Marine equipment puts forward higher requirements for the strength, plasticity and impact toughness of Ti80 alloy. In this study, three typical microstructures of exquiaxial, duplex, and widmanstatten structures of Ti80 alloy are obtained by adjusting the annealing temperature, and the mechanical properties are tested. The evolution law and strengthening and toughening mechanism of Ti80 alloy are clarified by SEM and EBSD techniques. The results show that the excellent compatible deformation capability of the equiaxed α phase makes the equiaxed and bimorph structures have excellent plasticity, and that the poor compatible deformation capability of the interlaced α clusters leads to the poor plasticity of the Vermanchii structure. The impact energy absorbed by the Westmanstatten structure is the highest. The difference of the impact properties of the three structures is mainly due to the difference of crack propagation work. The α phase of the duplex structure has excellent plastic deformation ability, and the lamellar α phase has good crack deflection action and certain plastic deformation ability. The relatively tortuous crack propagation path and good plastic deformation along the crack path make the duplex structure have the best strength, plasticity, and impact toughness.
  • [1]
    赵永庆,常辉,李佐臣,等.西北有色院创新研制的船用钛合金[J].钛工业进展, 2003, 20(6):12-16.
    [2]
    杨蓬勃.钛合金在船舶上的应用[J].广东造船, 2005, 24(3):30-32.
    [3]
    赵永庆.我国创新研制的主要船用钛合金及其应用[J].中国材料进展, 2014, 33(7):398-404.
    [4]
    SU B X, WANG B B, LUO L S, et al. Tuning microstructure and enhancing corrosion property of Ti-6Al-3Nb-2Zr-1Mo alloy through electron beam surface melting[J]. Corrosion Science, 2022, 206:110520.
    [5]
    SU B X, WANG B B, LUO L S, et al. Tuning microstructure and improving the corrosion resistance of a Ti-6Al-3Nb-2Zr-1Mo alloy via solution and aging treatments[J]. Corrosion Science, 2022, 208:110694.
    [6]
    XU Y L, XU L Y, DING L, et al. Microstructure and microtexture evolution of hot-rolled Ti-6321 alloy at different post-annealing temperatures[J]. Journal of Alloys and Compounds, 2022, 902:163842.
    [7]
    ZHOU D D, ZENG W D, XU J W, et al. Evolution of equiaxed and lamellar α during hot compression in a near alpha titanium alloy with bimodal microstructure[J]. Materials Characterization, 2019, 151:103-111.
    [8]
    ZHANG W Y, FAN J K, HUANG H, et al. Creep anisotropy characteristics and microstructural crystallography of marine engineering titanium alloy Ti6321 plate at room temperature[J]. Materials Science and Engineering:A, 2022, 854:143728.
    [9]
    FAN J K, ZHANG W Y, LI B B, et al. Crystallographic analysis of slip system activation in bimodal Ti-6Al-3Nb-2Zr-1Mo alloy under various dwell-fatigue loadings[J]. Materials Science&Engineering A, 2023, 865:144610.
    [10]
    WANG Q W, REN J Q, WU Y K, et al. Comparative study of crack growth behaviors of fully-lamellar and bi-lamellar Ti-6Al-3Nb-2Zr-1Mo alloy[J]. Journal of Alloys and Compounds, 2019, 789:249-255.
    [11]
    XU X F, TAYYE B A, WANG L, et al. Research on dynamic compression properties and deformation mechanism of Ti6321 titanium alloy[J]. Journal of Materials Research and Technology, 2020, 9(5):11509-11516.
    [12]
    YAN Z W, WANG L, NING Z X, et al. Evolution of dislocations and deformation twins in Ti6321 titanium alloy under contact explosion[J]. Journal of Materials Research and Technology, 2023, 24:1070-1075.
    [13]
    YAN Z W, WANG L, NING Z X, et al. Deformation behaviors and microstructure evolution of Ti6321 alloy under air blast loadings[J]. Journal of Materials Research and Technology, 2023, 24:5147-5158.
    [14]
    YAN Z W, ZHOU Z, WANG L, et al. Research on mechanical response of Ti6321 titanium alloy after shocked by light gas gun[J]. Materials Letters, 2022, 314:131483.
    [15]
    陈海生,罗锦华,王文盛,等. Ti-6321钛合金棒材热变形及热处理工艺[J].稀有金属材料与工程, 2016, 45(11):2948-2952.
    [16]
    XU Y L, ZHANG B B. Effects of hydrogen as a solid solution element on the deformation behavior of a near-alpha titanium alloy[J]. Materials Science and Engineering:A, 2021, 815:141269.
    [17]
    郭凯. Ti6Al3Nb2ZrMo合金的组织与力学性能研究[D].秦皇岛:燕山大学, 2020.
    [18]
    REN J Q, QI W, ZHANG B B, et al. Charpy impact anisotropy and the associated mechanisms in a hot-rolled Ti-6Al-3Nb-2Zr-1Mo alloy plate[J]. Materials Science and Engineering:A, 2022, 831:142187.
    [19]
    汪启明,杨晶,陈海生,等.大规格Ti80合金棒材冲击韧性各向异性研究[J].钛工业进展, 2023, 40(5):9-14.
    [20]
    XIE B J, YU Z X, JIANG H Y, et al. Effects of surface roughness on interfacial dynamic recrystallization and mechanical properties of Ti-6Al-3Nb-2Zr-1Mo alloy joints produced by hot-compression bonding[J]. Journal of Materials Science&Technology, 2022, 96:199-211.
    [21]
    HUANG S X, ZHAO Q Y, ZHAO Y Q, et al. Toughening effects of Mo and Nb addition on impact toughness and crack resistance of titanium alloys[J]. Journal of Materials Science&Technology, 2021, 79:147-164.
    [22]
    LEI L, ZHAO Y Q, ZHAO Q Y, et al. Impact toughness and deformation modes of Ti-6Al-4V alloy with different microstructures[J]. Materials Science and Engineering:A, 2021, 801:140411.
  • Related Articles

    [1]TAO Huan, SONG Dejun, YANG Shengli, LI Chong, YU Yan, PAN Yifan. Effects of Fe Content on the Microstructures and Properties of Ti80 Alloy[J]. Development and Application of Materials, 2021, 36(6): 7-11.
    [2]LIU Peng, XIE Bin, XIE Shufeng, WANG Pengyun. Research Progress on Configuration Strengthening of Multi-phase and Multi-scale Aluminum based Composites[J]. Development and Application of Materials, 2021, 36(4): 89-93.
    [3]ZHANG Liang, YANG Qing, ZHANG Xiaowei, HE Wenxia, LI Xiaoxiao, GU Ruochen. Finite Element Analysis on Restraint Intensity of Ti80 Alloy Specimen with Y-joint Groove[J]. Development and Application of Materials, 2020, 35(4): 37-41.
    [4]HAO Xiaobo, ZHANG Qiang, LI Bobo, LIU Yinqi, LI Yang. Effect of High Temperature Annealing in α + β Phase Region on Microstructure and Mechanical Properties of Ti80 Alloy Plates[J]. Development and Application of Materials, 2018, 33(1): 49-53. DOI: 10.19515/j.cnki.1003-1545.2018.01.008
    [5]DANG Hengyao, CHEN Pei, ZHANG Lijuan. Error Analysis on KIC Converted from JIC for Ti80 Alloy[J]. Development and Application of Materials, 2016, 31(5): 5-9. DOI: 10.19515/j.cnki.1003-1545.2016.05.002
    [6]JIANG Guo-liang, YAN Zuo-wei, MI Yao. Review on Toughening of Phenolic Foams[J]. Development and Application of Materials, 2015, 30(6): 94-98. DOI: 10.19515/j.cnki.1003-1545.2015.06.019
    [7]SHI Xu-zhong, WANG Yue, YU Xiang-fei, CHEN Pai-ming, WANG Yan-qiu, LIN Fu-wen. Anodic Oxidation Investigation on Ti80 Type Marine Titanium Alloy under Direct Current Mode[J]. Development and Application of Materials, 2010, 25(5): 16-19. DOI: 10.19515/j.cnki.1003-1545.2010.05.005
    [8]LI Liang, SUN Jian-ke, MENG Xiang-jun, LIU Yin-qi, CHEN Wei. Improvement of Superplasticity of Ti80 Alloy through Thermal Cycling Deformation[J]. Development and Application of Materials, 2005, 20(6): 1-3,8. DOI: 10.19515/j.cnki.1003-1545.2005.06.001
    [9]LU Xiao-sheng. The Study of Impact Toughness of 10MnNiCrMoV Steel[J]. Development and Application of Materials, 2005, 20(3): 11-13. DOI: 10.19515/j.cnki.1003-1545.2005.03.004
    [10]Pan Chuanhong. Effects of Forging Treatment on the Strength and Toughness of White Iron[J]. Development and Application of Materials, 2001, 16(3): 13-15. DOI: 10.19515/j.cnki.1003-1545.2001.03.004

Catalog

    Article Metrics

    Article views (151) PDF downloads (75) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return