Citation: | MUREDIER Xiakeer, HUANG Anguo, KANG Xuqiang, WANG Bingqi, YU Ximing. Calculation and Prediction of Structure Proportion in Heat Affected Zone of Low Alloy Steel Welding[J]. Development and Application of Materials, 2023, 38(5): 44-50,69. |
[1] |
祁文军, 方建疆, 周建平. 基于焊接CCT图的焊接接头组织和性能预测[J]. 焊接技术, 2003, 32(5): 12-13.
|
[2] |
KHURANA S P. Prediction of microstructure in HAZ of welds[C]//AIP Conference Proceedings. Columbus: AIP, 2004: 7-14.
|
[3] |
余明敏. 基于元胞自动机法的TC4-DT钛合金电子束焊接头晶粒组织模拟[D]. 南京: 南京航空航天大学, 2015.
|
[4] |
胡龙, 王义峰, 李索, 等. 基于SH-CCT图的Q345钢焊接接头组织与硬度预测方法研究[J]. 金属学报, 2021, 57(8): 1073-1086.
|
[5] |
SMOKVINA HANZA S, MAROHNI T, ILJKI D, et al. Artificial neural networks-based prediction of hardness of low-alloy steels using specific jominy distance[J]. Metals, 2021, 11(5): 714.
|
[6] |
邹广华. 焊接冷却时间t8/5的计算与分析[J]. 石油化工设备, 1997, 26(4): 18-22.
|
[7] |
机械电子工业部哈尔滨焊接研究所. 国产低合金钢焊接CCT图册[M]. 北京: 机械工业出版社, 1990.
|
[1] | SHI Zhong-ran, PAN Tao, WANG Rui-zhen, WANG Dong-ming, ZHAO He-ming, LUO Xiao-bing, CHAI Feng, YANG Cai-fu. Effect of Nitrogen on Microstructure and Toughness of Coarse Grain Heat Affected Zone in Vanadium Microalloyed Steel[J]. Development and Application of Materials, 2022, 37(2): 10-18. |
[2] | CHEN Yatao, ZHENG Fei, KOU Cheng. Study on Microstructure and Properties of Hyper Duplex Stainless Steel CD3MWN[J]. Development and Application of Materials, 2020, 35(3): 1-5,15. |
[3] | KONG Hongyu, ZHU Guanpeng, CENG Zhiwei, GUO Chun, YAO Rungang. Influence of Mo in Flux Cored Wires on the Mechanical Properties of Low Alloy Steel Weld Metal[J]. Development and Application of Materials, 2017, 32(2): 18-22. DOI: 10.19515/j.cnki.1003-1545.2017.02.004 |
[4] | YAN Feihao, WAN Ziyong, GENG Yongliang, XIONG Jinhui. Research on Microstructures and Properties of High Strong Low Alloy Steel Welded Joint by Electron Beam Welding[J]. Development and Application of Materials, 2016, 31(3): 52-56. DOI: 10.19515/j.cnki.1003-1545.2016.03.010 |
[5] | XUE Gang. Toughness Parameter Analysis of Low Alloy Steel Based on Tension Test[J]. Development and Application of Materials, 2015, 30(6): 1-4. DOI: 10.19515/j.cnki.1003-1545.2015.06.001 |
[6] | YIN Xie-zhen, YU Dong, JIANG Hong-yuan, AO Hong-rui, YAN Hui. Optimization Design of and Strength Checking UAV’s Variable-Geometry Structure[J]. Development and Application of Materials, 2011, 26(3): 70-73. DOI: 10.19515/j.cnki.1003-1545.2011.03.019 |
[7] | LIU Zhao, WU Chun-jun, ZHU Yu-tian, CHEN Mao-lin. Simulation and Computation of Pumping Diaphragm Deformation of Photo-driven Bending Micro-pump[J]. Development and Application of Materials, 2009, 24(2): 48-50,59. DOI: 10.19515/j.cnki.1003-1545.2009.02.012 |
[8] | LI Guo-ming, CHANG Wan-shun, CHEN Xue-qun. Studies of Experimental Method on Occluded Corrosion Cell of Carbon and Low Alloy Steels[J]. Development and Application of Materials, 2008, 23(3): 40-42,56. DOI: 10.19515/j.cnki.1003-1545.2008.03.010 |
[9] | PENG Yuan-dong, YI Jian-hong, LIANG Chao-ping, LI Li-ya, WU Hai-ming, WANG Le. Research on Sinter Hardening Property of Low Alloy Steels[J]. Development and Application of Materials, 2008, 23(2): 1-4. DOI: 10.19515/j.cnki.1003-1545.2008.02.001 |
[10] | LIU Gang, YAO Run-gang, KONG Hong-yu, ZHOU Hao. Effect of Nb and Ti on the Microstructure and Toughness of Sub-merged Melt Welding Joint of Continuous Casting 10MnNiCr Steel[J]. Development and Application of Materials, 2005, 20(1): 9-12,22. DOI: 10.19515/j.cnki.1003-1545.2005.01.003 |