Volume 38 Issue 1
Feb.  2023
Turn off MathJax
Article Contents
Abstract
References
Related Articles
YIN Yanchao, ZHANG Shuaifeng, XU Yali, JIANG Peng, YU Wei, LÜ Yifan. Influence of Pre-strain on Deformation Behavior of TC4ELI Titanium Alloy[J]. Development and Application of Materials, 2023, 38(1): 66-72.
Citation: YIN Yanchao, ZHANG Shuaifeng, XU Yali, JIANG Peng, YU Wei, LÜ Yifan. Influence of Pre-strain on Deformation Behavior of TC4ELI Titanium Alloy[J]. Development and Application of Materials, 2023, 38(1): 66-72.
shu

Influence of Pre-strain on Deformation Behavior of TC4ELI Titanium Alloy

  • Luoyang Ship Material Research Institute, Luoyang 471023, China

More Information
  • Received Date: July 10, 2022
  • Available Online: March 10, 2023
    Graphical Abstract
    • Abstract
  • Tension-unloading-compression and compression-unloading-tension tests are carried out to study the influence of pre-strain on the deformation behavior of TC4ELI titanium alloy. The results show that TC4ELI titanium alloy exhibits obvious bauschinger effect in both the tensile-first and compressive-first tests. With the increasing of pre-strain, the reverse yield strength decreases first and then tends to be stable. The saturated pre-strain under pre-tension test is about 2%, and the saturated pre-strain under pre-compressive test is about 4%. The reduction of yield strength is more obvious after pre-compression. The non-uniform plastic deformation due to the crystal orientation differences and highly asymmetric close hexagonal structure of α phase contributes to the residual stress, which is the main cause for the bauschinger effect in TC4ELI titanium alloy.
    • FullText(HTML)
    • References (22)
  • [1]
    王延峰,李聪,凌绪玉,等.金属材料的包申格效应综述[J].中国核科技报告, 2002(1):14.
    [2]
    MILLIGAN R V, KOO W H, DAVIDSON T E. The bauschinger effect in a high-strength steel[J]. Journal of Basic Engineering, 1966, 88(2):480-488.
    [3]
    KIM J H, KIM D, BARLAT F, et al. Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels[J]. Materials Science and Engineering:A, 2012, 539:259-270.
    [4]
    LIU X L, YUAN F P, ZHU Y T, et al. Extraordinary Bauschinger effect in gradient structured copper[J]. Scripta Materialia, 2018, 150:57-60.
    [5]
    CORBIN S F, WILKINSON D S, EMBURY J D. The Bauschinger effect in a particulate reinforced Al alloy[J]. Materials Science and Engineering:A, 1996, 207(1):1-11.
    [6]
    MACEWEN S R, ELLS C E, WOO O T. The bauschinger effect in zircaloy-2[J]. Journal of Nuclear Materials, 1981, 101(3):336-349.
    [7]
    MOISEYEV V N. Titanium alloys Russian aircraft and aerospace applications[M]. Boca Raton:Taylor&Francis, 2006.
    [8]
    DONACHIE M J. Titanium:a technical guide[M]. 2nd ed. Materials Park, OH:ASM International, 2000.
    [9]
    赵永庆,陈永楠,张学敏.钛合金相变及热处理[M].长沙:中南大学出版社, 2012.
    [10]
    常辉.海洋工程钛金属材料[M].北京:化学工业出版社, 2017.
    [11]
    关蕾,李瑞,张雪敏,等.退火温度对TC4ELI钛合金大规格环材组织和力学性能的影响[J].有色金属材料与工程, 2021, 42(3):18-22.
    [12]
    王雷,王琨,李艳青,等. TC4ELI钛合金低周疲劳性能研究[J].钛工业进展, 2018, 35(2):17-21.
    [13]
    王雷,屈平,李艳青,等.钛合金材料蠕变特性的理论与试验研究[J].船舶力学, 2018, 22(4):464-474.
    [14]
    王雷,屈平,黄进浩,等.钛合金耐压结构蠕变数值计算方法与试验验证[J].船舶力学, 2019, 23(2):190-199.
    [15]
    宋庆军.大厚度TC4ELI钛合金EBW质量控制及球壳变形预测[D].哈尔滨:哈尔滨工业大学, 2015.
    [16]
    孙洋洋,常辉,方志刚,等. TC4 ELI钛合金显微组织对低周疲劳性能的影响[J].稀有金属材料与工程, 2020, 49(5):1623-1628.
    [17]
    张功庭,盛光敏,黄利.金属包申格效应的表征、影响因素与机理研究进展[J].材料导报, 2008, 22(S3):135-138.
    [18]
    刘海涛,王任甫,杨景红,等. 10CrNi5MoV钢的包申格效应研究[J].材料开发与应用, 2016, 31(4):47-50.
    [19]
    马鸣图.金属合金中的Bauschinger效应[J].机械工程材料,1986,10(2):15-21.
    [20]
    STOLTZ R E, PELLOUX R M. The Bauschinger ef-fect in precipitation strengthened aluminum alloys[J]. Metallurgical Transactions A, 1976, 7(8):1295-1306.
    [21]
    马鸣图,段祝平,友田阳.金属合金中的包辛格效应及其在工业生产中的应用[M].北京:机械工业出版社,1994.
    [22]
    KASSAM Z H A, WANG Z R. Bauschinger effect in a modified Zr-2.5wt.% Nb pressure tube material[J]. Materials Science and Engineering:A, 1993, 171(1-2):55-63.
    • Related Articles

  • Related Articles

    [1]YE Fan, NIU Jicheng, NIE Jianhang, WANG Renfu, DENG Wanping. Research on Heat Treatment Process for Tensile Property Recovery of Cold-Forming 10CrNi5MoV Steel[J]. Development and Application of Materials, 2023, 38(1): 60-65.
    [2]WANG Ying, YANG Shengli, LIU Xiaoyong. Study on Tensile Stress Corrosion Behavior of Titanium Alloy at Slow Strain Rate[J]. Development and Application of Materials, 2022, 37(4): 15-20.
    [3]LIU Haitao, WANG Renfu, YANG Jinghong, NIU Jiajia. Research on Bauschinger Effect of 10CrNi5MoV Steel[J]. Development and Application of Materials, 2016, 31(4): 47-50. DOI: 10.19515/j.cnki.1003-1545.2016.04.009
    [4]FAN Yaling, YANG Hongliang. Analysis for Electromechanical Stability of the DE Actuator with Uniaxial Pre-stretch[J]. Development and Application of Materials, 2016, 31(3): 65-70. DOI: 10.19515/j.cnki.1003-1545.2016.03.013
    [5]FAN Yaling, YANG Hongliang. Electromechanical Stability Analysis for the DE Actuator with Biaxial Pre-stretch[J]. Development and Application of Materials, 2016, 31(2): 71-75. DOI: 10.19515/j.cnki.1003-1545.2016.02.014
    [6]LI Jing-yong, WANG Hu, LIU Zhi-peng, LU Ya-ming. Numerical Simulation of Welding Residual Stresses and Distortions of Aluminum Alloy Cylinder under Pre-tension Stresses[J]. Development and Application of Materials, 2008, 23(5): 52-55. DOI: 10.19515/j.cnki.1003-1545.2008.05.012
    [7]YE Jin-rui, ZHANG Bo-ming. Size Effect on Manufacturing Cost Estimation for Composite Materials[J]. Development and Application of Materials, 2008, 23(5): 24-29. DOI: 10.19515/j.cnki.1003-1545.2008.05.006
    [8]WANG He-ting, WANG Zai-you, SHEN Yi-fu. Research Progress in Shape Memory Effect of Fe-Mn-Si Based Shape Memory Alloy[J]. Development and Application of Materials, 2008, 23(2): 53-56,71. DOI: 10.19515/j.cnki.1003-1545.2008.02.015
    [9]MU Zhen-jun, LIN Zhi-jian, ZHUANG Yan, CHEN Xiang-feng, WANG Jing-jing, LIN Le-yun, ZHAO Yue-hong. Corrosion Behavior of Aluminium-magnesium Alloy in Sea Areas and Its Electrolyte Effect in Xiamen Sea Area[J]. Development and Application of Materials, 2007, 22(5): 20-24. DOI: 10.19515/j.cnki.1003-1545.2007.05.006
    [10]ZHANG Ming-ming, LI Jing-yong. Control of Welding Distortion of Al Alloy Sheet through Pre-tension[J]. Development and Application of Materials, 2005, 20(1): 36-38. DOI: 10.19515/j.cnki.1003-1545.2005.01.011

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (334) PDF downloads (28) Cited by()
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return