Citation: | KOU Weixiang, ZHANG Mingyang, HAN Huanqing. Study on Effect of MnO on Properties of Carbon Steel Flux Cored Wire[J]. Development and Application of Materials, 2023, 38(1): 17-22. |
[1] |
张占伟,李午申,薛振奎,等.自保护药芯焊丝熔敷金属中O、N的控制及其对显微组织和韧性的影响[J].天津大学学报, 2010, 43(2):186-189.
|
[2] |
川本裕晃,池田哲直,渡辺博久.Ni基合金フラックス入りワイヤ:JP,2011140064 A[P].2011-07-21.
|
[3] |
曹全金.镁合金活性MIG焊接研究[D].大连:大连理工大学, 2012.
|
[4] |
杨刚.铝合金A-TIG焊活性剂成分设计研究[D].镇江:江苏科技大学, 2012.
|
[5] |
HUANG H, SHYU S, TSENG, et al.Effects of the process parameters on austenitic stainless steel by TIG-flux welding[J].Journal of Materials Science and Technology,2006,22(3):367-374.
|
[6] |
郑秀芹,张振芹,孙业宏,等. WH.PP-AN29气体保护药芯焊丝的研制及应用[J].山东机械, 1999(2):26-27.
|
[7] |
栗卓新,蒋建敏,魏琪.熔渣成分对气保护不锈钢药芯焊丝脱渣性影响的研究[J].材料工程, 2003, 31(1):30-33.
|
[8] |
王恒,栗卓新, TILLMANN W,等.药芯组成及工艺参数对ENiCrMo3T0-4药芯焊丝气孔敏感性的影响[J].稀有金属材料与工程, 2018, 47(4):1205-1209.
|
[9] |
王恒. ENiCrMo3T0-4药芯焊丝焊缝金属气孔及热裂纹敏感性研究[D].北京:北京工业大学, 2016.
|
[10] |
于治水,刘孝曾,张德林,等.药芯焊丝焊缝夹杂物探讨[J].船舶工程, 1999, 21(2):28-31.
|
[11] |
丁韦,范桂芝,王贵山.夹杂物对埋弧焊焊缝韧性的影响[J].焊接技术, 1991, 20(6):11-13.
|
[1] | DANG Ning, WEI Chen, HUI Cheng, YANG Yuanyu, YANG Shangyu, WANG Jianjun, HAN Lihong. Development of Three-dimensional Characterizations and Electro-pulse Repairing Technology for Forming Defects within Ti Component by Laser Additive Manufacturing[J]. Development and Application of Materials, 2024, 39(4): 83-97. |
[2] | LI Qiulong, XU Zhe, GUO Jiguan, LIU Xiangqian, LI Peiyue, YU Yan. Research on Effect of Defect Dimension on Diffusion Bonding of Printed Circuit Heat Exchanger[J]. Development and Application of Materials, 2021, 36(2): 74-78. |
[3] | LI Bo-bo, CHEN Tao, LIU Yin-qi, BAO Shu-juan. Analysis on Delamination Defects of Cold Rolled Titanium Strip[J]. Development and Application of Materials, 2015, 30(5): 35-39. DOI: 10.19515/j.cnki.1003-1545.2015.05.007 |
[4] | HUANG Wei-zhong, LIN Ying-jun, ZHOU Jian. Relationship between Particle Defects of PVC and Filler Size[J]. Development and Application of Materials, 2015, 30(2): 26-31. DOI: 10.19515/j.cnki.1003-1545.2015.02.006 |
[5] | CHEN Wei, ZHAN Yao, GAOZhen-xuan. Defects and Process Control in Production of Copper-Nickel Alloy Ingot Casting[J]. Development and Application of Materials, 2012, 27(6): 54-57. DOI: 10.19515/j.cnki.1003-1545.2012.06.013 |
[6] | ZHAO Bin. The Influence of Macroscopic Defects On the Critical Current of HTS Bi-2223 Tapes[J]. Development and Application of Materials, 2012, 27(3): 10-12. DOI: 10.19515/j.cnki.1003-1545.2012.03.003 |
[7] | ZHANG Jie, CHEN Ji-zhi, FENG Gang-xian. Research Progress of Effect of Porosity on the Fatigue Behavior in the Cast Alloy[J]. Development and Application of Materials, 2011, 26(5): 83-87. DOI: 10.19515/j.cnki.1003-1545.2011.05.020 |
[8] | SONG Xi-ning, LI Wen-ying, ZHANG Tian-hui. Welding Method Effect Research on Defects Type of Steel WDB620[J]. Development and Application of Materials, 2009, 24(6): 15-18. DOI: 10.19515/j.cnki.1003-1545.2009.06.004 |
[9] | Ma Jianmin, Li Jingyong. Effect of Weld Defects on the Fatigue of Aluminum Alloy Joint[J]. Development and Application of Materials, 2003, 18(6): 31-34. DOI: 10.19515/j.cnki.1003-1545.2003.06.009 |
[10] | Fu Bufang. Analyses on Defects of Manual Molding RPUF[J]. Development and Application of Materials, 2002, 17(2): 31-33. DOI: 10.19515/j.cnki.1003-1545.2002.02.010 |