Citation: | LIU Jingjun, ZHANG Dawei, WANG Jiankun, LI Shuyi, MA Yang. Corrosion Factor Analysis of Heat Exchange Tubes of Open Rack Vaporizer[J]. Development and Application of Materials, 2022, 37(3): 57-60. |
[1] |
KESTEN D.A Clean Fue-LNG[J].MesserSAIC, 2000, 5(8):27-28.
|
[2] |
高振宇,高鹏,刘倩,等.中国LNG产业现状分析及发展建议[J].天然气技术与经济, 2019, 13(6):14-19.
|
[3] |
单彤文.中国LNG产业链核心技术发展现状与关键技术发展方向[J].中国海上油气, 2020, 32(4):190-196.
|
[4] |
张尚文.液化天然气开架式气化器工艺研究和设计[J].石油化工设备, 2012, 41(3):25-29.
|
[5] |
龙晋明,郭忠诚,樊爱民,等.牺牲阳极材料及其在金属防腐工程中的应用[J].云南冶金, 2002, 31(3):142-148.
|
[6] |
梅伟伟,郭海涛,李云龙,等.ORV涂层损坏原因分析及现场修复实践[J].天然气技术与经济, 2017, 11(S1):44-47.
|
[7] |
吴永忠.LNG接收站海水开架式气化器(ORV)涂层失效分析和可靠性评估[J].中国特种设备安全, 2014:96-99, 104.
|
[8] |
REBOUL M C, GIMENEZ P, RAMEAU J J.A pr-oposed activation mechanism for Al anodes[J].CORROSION, 1984, 40(7):366-371.
|
[9] |
王曰义.铝合金在流动海水中的腐蚀行为[J].装备环境工程, 2005, 2(6):72-76.
|
[10] |
NEVILLE A, HODGKIESS T, DALLAS J T.A study of the erosion-corrosion behaviour of engineering steels for marine pumping applications[J].Wear, 1995, 186-187:497-507.
|
[11] |
ZHENG Y G, YAO Z M, WEI X Y, et al.The synergistic effect between erosion and corrosion in acidic slurry medium[J].Wear, 1995, 186-187:555-561.
|
[12] |
郑玉责,姚治铭,何莉,等.泥浆型冲蚀中冲刷和腐蚀交互作用研究综述[J].材料科学与工程, 1994, 12(4):27-31.
|
[13] |
DATTA J, SAMANTA B, JANA A, et al.Role of Cl- and NO-3 ions on the corrosion behavior of 20% SiCp reinforced 6061-Al metal matrix composite:a correlation between electrochemical studies and atomic force microscopy[J].Corrosion Science, 2008, 50(9):2658-2668.
|
[14] |
云凤玲,徐克.重金属离子对5052铝合金耐蚀性能的影响[J].化学工业与工程, 2010, 27(2):173-176.
|
[15] |
张成伟,马铁轮,盖晓峰,等.LNG接收站开架式气化器在高含沙海水工况下使用的探讨[J].石油工程建设, 2007, 33(6):8-10.
|
[16] |
龚敏.冲刷腐蚀的某些影响因素及其研究方法[J].四川轻化工学院学报, 1995, 8(1):53-59.
|
[17] |
丁一刚,王慧龙,郭兴蓬,等.金属在液固两相流中的冲刷腐蚀[J].材料保护, 2001, 34(11):16-18.
|
[18] |
JIANG X, ZHENG Y G, QU D R, et al.Effect of calcium ions on pitting corrosion and inhibition performance in CO2 corrosion of N80 steel[J].Corrosion Science, 2006, 48(10):3091-3108.
|
[19] |
云凤玲,徐克.Cu2+和Fe3+离子对5052铝合金耐海水腐蚀性能的影响[C].海峡两岸材料腐蚀与防护研讨会, 2010.
|
[20] |
AHMED Z.Corrosion and corrosion prevention of aluminium alloys in desalination plants:part 2[J].Anti-Corrosion Methods and Materials, 1981, 28(7):4-10.
|
[21] |
WONGKASEMJIT S, WASNTAKORN A.Laboratory study of corrosion effect of dimethyl-mercury on natural gas processing equipment[J].JCSE, 1999, 1(1):1-12.
|
[22] |
羊东明,刘强,李亚光.5083铝合金换热器汞腐蚀机理及脱汞工艺[J].腐蚀与防护, 2010, 31(9):715-717.
|
[23] |
陈飞,解利昕,孙晨,等.动电位极化曲线法研究铝合金材料在海水中腐蚀现象[J].天津化工, 2014, 28(5):12-14.
|
[24] |
LIAO C M, OLIVE J M, GAO M, et al.In-situ monitoring of pitting corrosion in aluminum alloy 2024[J].CORROSION, 1998, 54(6):451-458.
|
[25] |
SILVA J W J, BUSTAMANTE A G, CODARO E N, et al.Morphological analysis of pits formed on Al2024-T3 in chloride aqueous solution[J].Applied Surface Science, 2004, 236(1-4):356-365.
|
[26] |
张海永,孟宪林,孙东明,等.pH值对5083铝合金腐蚀行为的影响[J].山东化工, 2015, 44(15):37-41.
|