Volume 37 Issue 5
Oct.  2022
Turn off MathJax
Article Contents
Abstract
References
Related Articles
DAI Le, WANG Xian, ZHANG Yanchao, ZHOU Xiaofeng. Effect of Cooling Rate on the Transformation of the Weld Metal of 10CrNi5MoV Steel[J]. Development and Application of Materials, 2022, 37(5): 73-76.
Citation: DAI Le, WANG Xian, ZHANG Yanchao, ZHOU Xiaofeng. Effect of Cooling Rate on the Transformation of the Weld Metal of 10CrNi5MoV Steel[J]. Development and Application of Materials, 2022, 37(5): 73-76.
shu

Effect of Cooling Rate on the Transformation of the Weld Metal of 10CrNi5MoV Steel

  • 1. Navy Military Affairs Representation Stationed, Luoyang 471023, China;

  • 2. Luoyang Ship Material Research Institute, Luoyang 471023, China

More Information
  • Received Date: June 15, 2002
  • Available Online: November 11, 2022
    Graphical Abstract
    • Abstract
  • The temperature-expansion diagrams of austenite continuous cooling were measured for the weld metal of 10CrNi5MoV steel at different cooling rate with Gleeble-3 500 simulator.Through expansion volume of different temperature the diagrams of austenite transformation kinetics were gained.Effect of cooling rete on austenite transformation were studied.The results show that the curves austenite transformation kinetics of the weld metal were “S” type at different cooling rate. The curves of transformation rate of austenite vs temperature showed a single peak at the cooling rate of 60 ℃/s、30 ℃/s or 15, the curves of transformation rate of austenite vs temperature bainite and granular bainite transformation twin peak at the cooling rate of 6 ℃/s.
    • FullText(HTML)
    • References (9)
  • [1]
    张文钺. 焊接冶金学: 基本原理[M]. 北京: 机械工业出版社, 1995.
    [2]
    陈伯蠡. 焊接冶金原理[M]. 北京: 清华大学出版社, 1991.
    [3]
    OHKITA S, HORII Y. Recent development in controlling the microstructure and properties of low alloy steel weld metals[J]. ISIJ International, 1995, 35(10): 1170-1182.
    [4]
    VIANO D M, AHMED N U, SCHUMANN G O. Influence of heat input and travel speed on microstructure and mechanical properties of double tandem submerged arc high strength low alloy steel weldments[J]. Science and Technology of Welding and Joining, 2000, 5(1): 26-34.
    [5]
    LIU Y C, SOMMER F, MITTEMEIJER E J. Abno-rmal austenite-ferrite transformation behaviour in substitutional Fe-based alloys[J]. Acta Materialia, 2003, 51(2): 507-519.
    [6]
    中华人民共和国冶金工业部. 钢的连续冷却转变曲线图的测定方法: YB/T 5128—1993[S]. 北京: 中国标准出版社, 1994.
    [7]
    ASTM A1033-10-2015. Standard practice for quantitative measurement and reporting of hypoeutectoid carbon and low-alloy steel phase transformation[S]. Pennsylvania: ASTM, 2015.
    [8]
    刘宗昌, 任慧平, 宋义全. 金属固态相变教程[M]. 2版. 北京: 冶金工业出版社, 2011.
    [9]
    徐祖耀, 刘世楷. 贝氏体相变与贝氏体[M]. 北京: 科学出版社, 1991.
    • Related Articles

  • Related Articles

    [1]GUO Haodong, YANG Chaofei, SUN lei, WANG Renfu, ZHANG Yuxiang, HUANG Dong. Mechanical Behavior and its Intrinsic Model of 10CrNi5MoV Steel in Two-phase Region[J]. Development and Application of Materials, 2024, 39(6): 84-89.
    [2]YE Fan, NIU Jicheng, NIE Jianhang, WANG Renfu, DENG Wanping. Research on Heat Treatment Process for Tensile Property Recovery of Cold-Forming 10CrNi5MoV Steel[J]. Development and Application of Materials, 2023, 38(1): 60-65.
    [3]TONG Zhiyuan, GONG Xuhui. Physical Constitutive Model of Tensile Plastic Strain for 10CrNi8MoV Steel[J]. Development and Application of Materials, 2022, 37(5): 11-15.
    [4]WANG Renfu, DENG Wanping, NIU Jicheng. Effect of Plastic Deformation and Stress Relief Heat Treatment on Microstructure and Properties of 10CrNi5MoV Steel Plate[J]. Development and Application of Materials, 2019, 34(5): 16-21,26. DOI: 10.19515/j.cnki.1003-1545.2019.05.004
    [5]DENG Wanping, NIU Jicheng, WANG Renfu. Effect of Stress Relieving Heat Treatment on Microstructure and Properties of 10CrNi5MoV Steel after Plastic Deformation[J]. Development and Application of Materials, 2019, 34(3): 46-51,62. DOI: 10.19515/j.cnki.1003-1545.2019.03.008
    [6]YANG Shu, ZHANG Yuxiang, YANG Chaofei. Continuous Cooling Transformation Behavior of 370 MPa 10CrNiCu Casting[J]. Development and Application of Materials, 2016, 31(5): 10-12. DOI: 10.19515/j.cnki.1003-1545.2016.05.003
    [7]DENG Wan-ping, XUE Gang, WANG Ren-fu. Analysis for the couse of Lower Performance of end Part of 10CrNi5MoV Steel plate[J]. Development and Application of Materials, 2014, 29(4): 29-33. DOI: 10.19515/j.cnki.1003-1545.2014.04.007
    [8]WANG Xian, DU Yi, ZHANG Jing-hai, XUE Gang. Effect of Interpass Temperature on Mechanical Property of Gas Shielded Welding Joint to 10CrNi5MoV Steel[J]. Development and Application of Materials, 2014, 29(2): 37-41. DOI: 10.19515/j.cnki.1003-1545.2014.02.011
    [9]SA Shi-yong. Narrow Gap Metal Arc Gas Welding of 10CrNi5MoV Steel Thick Plate[J]. Development and Application of Materials, 2010, 25(1): 13-15. DOI: 10.19515/j.cnki.1003-1545.2010.01.004
    [10]Wang Dongfeng, Kang Buxi, Liu Ping, Tian Baohong, Huang Jinliang. Phase Transformation Kinetics of Solutioned Cu-Ni-Si Alloy[J]. Development and Application of Materials, 2003, 18(5): 1-3,13. DOI: 10.19515/j.cnki.1003-1545.2003.05.001

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (168) PDF downloads (19) Cited by()
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return