Volume 36 Issue 6
Dec.  2021
Turn off MathJax
Article Contents
Abstract
References
Related Articles
YAN Feihao, WANG Gang, FAN Jinwei, CUI Yongjie, GAO Fuyang. Review and Prospect of High Temperature Titanium Alloy Welding[J]. Development and Application of Materials, 2021, 36(6): 97-102.
Citation: YAN Feihao, WANG Gang, FAN Jinwei, CUI Yongjie, GAO Fuyang. Review and Prospect of High Temperature Titanium Alloy Welding[J]. Development and Application of Materials, 2021, 36(6): 97-102.
shu

Review and Prospect of High Temperature Titanium Alloy Welding

  • 1. Luoyang Ship Material Research Institute, Luoyang 471023, China;

  • 2. National and Local Joint Engineering Research Center for advanced Titanium and titanium alloy Materials Technology, Luoyang 471023, China

More Information
  • Received Date: June 21, 2020
    Graphical Abstract
    • Abstract
  • Here is reviewed the development of high temperature titanium alloy welding at home and abroad. The welding characteristics of high temperature titanium alloy and the requirements for the consistency, uniformity and stability of the thermal strength, thermal stability and creep fatigue resistance of the welded joints of high temperature titanium alloy are summarized. The research status of technologies of flash butt welding, linear friction welding, electron beam welding and laser welding are introduced, and the future research direction of high temperature titanium alloy welding prospected.
    • FullText(HTML)
    • References (20)
  • [1]
    赵永庆. 高温钛合金研究[J]. 钛工业进展, 2001, 18(1):33-39.
    [2]
    KOJIAHEBBA, 等. 各国钛合金[M]. 王金友, 马济民, 蔡建明, 等, 译. 北京:北京航空材料研究院, 2005.
    [3]
    魏寿庸, 何瑜, 王青江, 等. 俄航空发动机用高温钛合金发展综述[J]. 航空发动机, 2005, 31(1):52-58.
    [4]
    JHA J S, DHALA S, TOPPO S P, et al. Effect of strain amplitude on low cycle fatigue and microstructure evolution in Ti-6Al-4V:a TKD and TEM characterization[J]. Materials Characterization, 2019, 155:109829.
    [5]
    EYLON D, FUJISHIRO S, POSTANS P J, et al. High-temperature titanium alloys-A review[J]. JOM, 1984, 36(11):55-62.
    [6]
    刘莹莹, 陈子勇, 金头男, 等. 600℃高温钛合金发展现状与展望[J]. 材料导报, 2018, 32(11):1863-1869.
    [7]
    萧今声, 许国栋. 提高高温钛合金性能的途径[J]. 中国有色金属学报, 1997, 7:97-105.
    [8]
    蔡建明, 郝孟一, 李学明, 等. BT36高温钛合金的成分特点及组织研究[J]. 材料工程, 2000, 28(2):10-12.
    [9]
    何春艳, 张利军. 国内外高温钛合金的发展与应用[J]. 世界有色金属, 2016(1):21-25.
    [10]
    李军帅. Ti6242钛合金闪光焊过程中高温变形行为及有限元模拟[D]. 贵阳:贵州大学, 2015.
    [11]
    WEINGRILL L, KRUTZLER J, ENZINGER N. Temperature field evolution during flash butt welding of railway rails[J]. Materials Science Forum, 2016, 879:2088-2093.
    [12]
    XU P W, ZHOU L, HAN M L, et al. Flash-butt welded Ti6242 joints preserved base-material strength and ductility[J]. Materials Science and Engineering:A, 2020, 774:138915.
    [13]
    CHEN Z Y, WANG Q J, LI J R, et al. Microstructure and mechanical property of linear friction weldnient of a near-alpha titanium alloy Ti-60[EB/OL]. 2012
    [14]
    王涛. 高温钛合金Ti600电子束焊接接头组织及性能研究[D]. 哈尔滨:哈尔滨工业大学, 2016.
    [15]
    陈志勇. Ti-60钛合金电子束焊接接头的显微组织、力学性能与变形行为[D]. 沈阳:中国科学院金属研究所, 2008.
    [16]
    闫伟. Ti-55钛合金板材的CO2激光焊与电子束焊的实验研究[D]. 沈阳:东北大学, 2006.
    [17]
    赵亮. Ti-60A合金中的硅化物及原始β晶粒尺寸控制研究[D]. 沈阳:中国科学院金属研究所, 2008.
    [18]
    陈哲源, 李晋炜, 锁红波, 等. 成分调控对高温钛合金电子束焊接接头组织和力学性能的影响[C]//第14届全国特种加工学术会议论文集. 苏州, 2011:650-655.
    [19]
    王维新, 付兴柏, 刘巨峰, 等. GTi70与TC4异种钛合金材料激光焊缝组织与性能分析[J]. 焊接学报, 2019, 40(3):133-139.
    [20]
    MESHRAM S D, MOHANDAS T. Influence of matrix microstructure on aging response of near alpha titanium alloy (IMI834) parent metal and welds on toughness[J]. Materials Science and Technology, 2011, 27(1):235-239.
    • Related Articles

  • Related Articles

    [1]WANG Houqin, GAN Shuhe, WANG Yifan, SONG Qingjun, ZHANG Binggang. Study on Microstructures and Mechanical Properties of 60 mm Thick TC4 ELI Titanium Alloy Welded Joints by Electron Beam Welding[J]. Development and Application of Materials, 2024, 39(6): 35-43,52.
    [2]SUN Guangda, LI Yuxuan, ZHANG Tianhao, ZHOU Li, YANG Shengli, GAO Fuyang, LÜ Yifan, QIAO Sheng, ZHU Tiecheng. Research Progress of Friction Stir Welding Technology in Marine Titanium Alloy[J]. Development and Application of Materials, 2024, 39(5): 17-30.
    [3]MU Zhuangzhuang, LIAO Zhiqian, YU Wei, LEI Xiaowei, XU Yali, MA Zhaowei, XU Lefeng. Microstructure and Mechanical Properties of Laser Welded Joint of TA5 Titanium Alloy[J]. Development and Application of Materials, 2021, 36(6): 60-66.
    [4]LI Yanmo, MA Zhaowei, XU Zhe, LI Peiyue, FU Wen, LIU Xiangqian, LI Qiulong, CHEN Bin, YU Liming, LIU Chenxi. Microstructure and Mechanical Properties of Diffusion Welded Joints of TA22 Titanium Alloy[J]. Development and Application of Materials, 2021, 36(5): 10-15.
    [5]MEI Wenjia, ZHANG Yunhao, GAO Fuyang, YAN Feihao, YU Wei, JIANG Peng, ZHU Lele, LIU Yinqi. Research on Microstructure and Properties of Ti700sr High-temperature Titanium Alloy TIG Welded Joint[J]. Development and Application of Materials, 2021, 36(4): 72-75.
    [6]AN Feipeng, LI Jiaqi, JIANG Peng, YANG Zhijun. Research Status of CMT Welding Technology for Titanium Alloy[J]. Development and Application of Materials, 2019, 34(4): 78-83,90. DOI: 10.19515/j.cnki.1003-1545.2019.04.015
    [7]GAO Qi, LIAO Zhiqian, JIANG Peng, GAO Fuyang, GENG Yongliang. Research Status of Electron Beam Welding Technology for Large Thickness Titanium Alloy[J]. Development and Application of Materials, 2018, 33(2): 118-129. DOI: 10.19515/j.cnki.1003-1545.2018.02.019
    [8]QI Fenghua, SUN Pengpeng, LI Peng, CHEN Liyang, HU Jingyuan. Study on Microstructures and Properties of Ti-Al Dissimilar Alloy Joint by Electron Beam Welding[J]. Development and Application of Materials, 2017, 32(4): 63-67. DOI: 10.19515/j.cnki.1003-1545.2017.04.010
    [9]YAN Feihao, WAN Ziyong, GENG Yongliang, XIONG Jinhui. Research on Microstructures and Properties of High Strong Low Alloy Steel Welded Joint by Electron Beam Welding[J]. Development and Application of Materials, 2016, 31(3): 52-56. DOI: 10.19515/j.cnki.1003-1545.2016.03.010
    [10]YANG Yan-tao, ZHANG Yong-yang, YU Wei. Property of Titanium Alloy Welded Joints Treated with Ultrasonic Peening[J]. Development and Application of Materials, 2007, 22(1): 28-32. DOI: 10.19515/j.cnki.1003-1545.2007.01.008

  • Cited by

    Periodical cited type(5)

    1. 江恬恬，高福洋，杨胜利，蒋鹏，晏阳阳，崔永杰. 钛合金振动送丝窄间隙焊接位置适应性研究. 焊接技术. 2025(02): 35-40 .
    2. 高福洋，江恬恬，石红杰，蒋鹏. 钛合金振动送丝频率对焊接熔池成形的影响. 焊接技术. 2024(01): 22-26 .
    3. 贡一峰，李敬勇，林靖宇，徐育烺，王卫东. 基于正交试验的TC4钛合金激光焊工艺优化研究. 精密成形工程. 2024(05): 11-20 .
    4. 唐伟清，罗军明，陈宇海，徐吉林. TC4钛合金表面激光冲击强化-微弧氧化涂层的组织和性能. 材料热处理学报. 2023(03): 144-151 .
    5. 付娟，钱瑞鹏，赵勇，郭纪龙，陈国强. 激光电弧复合增材制造钛合金的组织和性能研究. 兵器材料科学与工程. 2023(05): 16-20 .

    Other cited types(7)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (240) PDF downloads (33) Cited by(12)
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return