Volume 36 Issue 3
Jun.  2021
Turn off MathJax
Article Contents
Abstract
References
Related Articles
WANG Renfu, YAO Zhiying, DENG Wanping, NIU Jicheng, YE Fan. Research Progress on Stress Reduction Heat Treatment of Low Alloy Steel[J]. Development and Application of Materials, 2021, 36(3): 86-94.
Citation: WANG Renfu, YAO Zhiying, DENG Wanping, NIU Jicheng, YE Fan. Research Progress on Stress Reduction Heat Treatment of Low Alloy Steel[J]. Development and Application of Materials, 2021, 36(3): 86-94.
shu

Research Progress on Stress Reduction Heat Treatment of Low Alloy Steel

  • Luoyang Ship Material Research Institute, Luoyang 471023, China

More Information
  • Received Date: September 27, 2020
    Graphical Abstract
    • Abstract
  • Here were introduced the welding residual stress and its elimination methods, and summarized the mechanism of heat treatment method to eliminate residual stress, process parameter design, characteristics of stress reduction heat treatment of low alloy steel, and the law of the effect of this treatment on the properties and residual stress of low alloy steel component. It was pointed out that, for the low alloy steel components, except for the stress relief reduction, it was necessary to avoid the material deterioration after stress relief heat treatment as far as possible in the process of material selection, production of the component and the formulation of heat treatment parameters.
    • FullText(HTML)
    • References (17)
  • [1]
    LIANG M T,LIU S J,SONG L L,et al.Effect of simulated stress-relieving heat treatment on microstructure and tensile properties of CLAM steel[J].Fusion Engineering and Design,2019,148:111287.
    [2]
    KALYANKAR V D,CHUDASAMA G.Effect of post weld heat treatment on mechanical properties of pressure vessel steels[J].Materials Today:Proceedings,2018,5(11):24675-24684.
    [3]
    袁鸿志,冯晓宇.去应力退火工艺参数的研究[J].热处理技术与装备,2014,35(2):48-50.
    [4]
    王成银.国外焊后热处理标准的动向[J].国外金属热处理,1995,16(5):40-42.
    [5]
    王泽军.球形储罐局部消应力热处理的机理与效果评价研究[D].天津:天津大学,2007.
    [6]
    王任甫.消除应力处理对10CrNi5MoV、10CrNi3MoV钢及焊接接头性能影响的试验研究总结[R].洛阳:七二五所科技报告,2001:8,16-42.
    [7]
    赵松岩.关于消除焊后残余应力及焊后热处理温度问题的探讨[J].山东机械,2003(2):59.
    [8]
    刘永刚,李显,李少华.焊后去应力退火的机理及应用[J].金属加工(热加工),2009(14):60-61.
    [9]
    王国庆,贾宝全,张智超.热处理消除Q235钢焊接残余应力机理的研究[J].焊接技术,2011,40(10):56-57.
    [10]
    穆霞英.蠕变力学[M].西安:西安交通大学出版社,1990.
    [11]
    吴新丽,邹杰,李恩,等.热处理保温时间对焊接残余应力影响的模拟分析[J].电焊机,2019,49(6):20-25.
    [12]
    方大鹏,张京海.785MPa级焊接接头消应力热处理后韧性研究[J].材料开发与应用,2012,27(1):1-4.
    [13]
    米谷茂,著.残余应力的产生和对策[M].朱荆璞,邵会孟,译.北京:机械工业出版社,1983:250.
    [14]
    稻垣道夫,田中甚吉,著.高强钢焊接实践[M].郭希烈,张文钺,译.北京:机械工业出版社,1992:83-159.
    [15]
    王一戎,车小莉.低合金高强钢热影响区的消除应力脆化[J].焊接,1992(1):7-10.
    [16]
    丁悌远.关于低合金钢热影响区消除应力热处理裂纹的研究[J].焊接,1972(12):19-33.
    [17]
    日本焊接协会HSE委员会.钢焊接区的热应变脆化[M].北京:机械工业出版社,1982:154-156.
    • Related Articles

  • Related Articles

    [1]LIU Lei, SUN Jianwei. Research Status and Prospect of Bearing Surface Modification Technology[J]. Development and Application of Materials, 2019, 34(4): 84-90. DOI: 10.19515/j.cnki.1003-1545.2019.04.016
    [2]HUANG Zhenzhen, GENG Zhi, GUO Zhongren, ZHU Bo. Surface Modification of Aramid Fiber by Water-Soluble Sizing Agent and Its Effect on the Interface of Aramid and Epoxy Composites[J]. Development and Application of Materials, 2018, 33(3): 33-38. DOI: 10.19515/j.cnki.1003-1545.2018.03.005
    [3]XU Jing, SU Yali, CHEN Yu, PENG Maolai. Development of Polyaniline Conductive Coating[J]. Development and Application of Materials, 2015, 30(1): 20-23. DOI: 10.19515/j.cnki.1003-1545.2015.01.004
    [4]ZHANG Fei, SHEN Shao-hua, XIAO Qiu-guo, PENG Mei-xun, SHI Yu, ZHANG Zhe. Surface Modification of Tungsten Molybdenum Acid Zirconium with Silane Coupling Agent[J]. Development and Application of Materials, 2014, 29(6): 72-77. DOI: 10.19515/j.cnki.1003-1545.2014.06.015
    [5]LI Jin-ling, WANG Bao-hui, LI Li, ZHANG Gang-qiang, GAI Cui-ping, YANG Xue-feng, SHAO Li-ying, SUI Xin. Study on the Surface Modification of Nano-SiO2 Powder[J]. Development and Application of Materials, 2011, 26(2): 18-21. DOI: 10.19515/j.cnki.1003-1545.2011.02.004
    [6]WAN Bing-hua, FEI Jing-yin, GAO Wen-juan. Research on Surface-modification of Nanoparticles Powder[J]. Development and Application of Materials, 2010, 25(4): 98-104. DOI: 10.19515/j.cnki.1003-1545.2010.04.023
    [7]WANG Fei, HUANG Ying, SU Wu. Progress in Synthesis and Surface Modification of PBO Fiber[J]. Development and Application of Materials, 2009, 24(2): 81-86. DOI: 10.19515/j.cnki.1003-1545.2009.02.020
    [8]XU Jian-guo, XIE Chuan-lin, DU Zhan-bin. Effect of “Jin Mo” Auto-restoration Coating on Surface Modification of 45 Steel Tribo-surface[J]. Development and Application of Materials, 2007, 22(4): 30-33. DOI: 10.19515/j.cnki.1003-1545.2007.04.009
    [9]ZHAO Guo, LU Lei. Study on the Surface Modification of Steel Slag[J]. Development and Application of Materials, 2004, 19(4): 13-15. DOI: 10.19515/j.cnki.1003-1545.2004.04.004
    [10]Fan Chunhua, Huang Yinhui, Zhang Jianhua, Zhao Jianfeng, Zhang Jianfeng, Shen Yifu. Surface Improvement by Laser Coating of Super Fine Ceramic Powder[J]. Development and Application of Materials, 2001, 16(2): 1-3. DOI: 10.19515/j.cnki.1003-1545.2001.02.001

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (194) PDF downloads (20) Cited by()
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return