Volume 36 Issue 4
Aug.  2021
Turn off MathJax
Article Contents
Abstract
References
Related Articles
ZHANG Yu, XUE Gang, WU Yanming, HE Zhitao. Influence of GMAW-P Pulse Parameters on Welding Process and Weld Size[J]. Development and Application of Materials, 2021, 36(4): 76-81.
Citation: ZHANG Yu, XUE Gang, WU Yanming, HE Zhitao. Influence of GMAW-P Pulse Parameters on Welding Process and Weld Size[J]. Development and Application of Materials, 2021, 36(4): 76-81.
shu

Influence of GMAW-P Pulse Parameters on Welding Process and Weld Size

  • Luoyang Ship Material Research Institute, Luoyang 471023, China

More Information
  • Received Date: February 06, 2021
    Graphical Abstract
    • Abstract
  • The influences of pulse current, pulse time, pulse frequency and other parameters on the weld formation and the stability of welding process were analyzed by using there-factor and three-level orthogonal test, combined with high-speed photography, welding electrical parameter acquisition, metallographic detection and other means. The results showed that among the three pulse parameters, the pulse frequency had a great effect on the penetration and welding stability, while the pulse current had a great effect on the weld width.
    • FullText(HTML)
    • References (10)
  • [1]
    EMANUEL B.F.DOS SANTOS,PISTOR R,et al.Pulse profile and metal transfer in pulsed gas metal arc welding:droplet formation,detachment and velocity[J].Science and Technology of Welding and Joining,2017,22(7):627-641.
    [2]
    ZENG M,HUANG J S,ZHANG Y J,et al.Modeling for GMAW process with a current waveform control method[J].Journal of Materials Processing Technology,2017,204:404-413.
    [3]
    朱强,薛家祥,徐敏,等.脉冲MIG焊熔滴过渡及电流波形控制[J].热加工工艺,2016,45(7):214-220.
    [4]
    陈小峰,林放,黄文超,等.基于正交试验的脉冲MIG焊参数优化试验[J].工艺与新技术,2010,39(12):21-23.
    [5]
    万春锋,代新雷.奥氏体不锈钢脉冲MIG焊工艺研究[J].山东化工,2016,45(4):76-78.
    [6]
    PALANI P K,MURUGAN N.Selection of parameters of pulsed current gas metal arc welding[J].Journal of Materials Processing Technology,2006,172:1-10.
    [7]
    文元美,黄石生,刘桂熊.脉冲TCGMAW电流频率对熔滴过渡与焊缝成形的影响[J].华南理工大学学报,2011,39(11):88-91.
    [8]
    姚屏,黄文超,薛家祥,等.脉冲参数对脉冲MIG焊焊接行为的影响[J].华南理工大学学报,2008,36(10):140-145.
    [9]
    张晓东,霍光瑞.脉冲参数对高强奥氏体焊丝MIG焊接熔滴过渡的影响[J].材料开发与应用,2013,28(1):15-19.
    [10]
    李惠敏,凌泽民,何建.CO2气体保护焊电弧稳定性评价指标研究[J].热加工工艺,2016,45(9):208-212.
    • Related Articles

  • Related Articles

    [1]GUAN Haozhen, ZHANG Yu, SUN Lei, WU Yanming. Neural Network Modeling and Parameter Prediction for Arc Length of Pulsed Gas Metal Arc Welding[J]. Development and Application of Materials, 2024, 39(3): 28-35.
    [2]GUO Chaohui, WANG Pengyun, CHU Shaoqi, LIU Guoyuan, LI Li, JIANG Feng, TIAN Qingnian, BAI Jing. Effect of CMT+P Welding Current on Microstructure and Mechanical Properties of 5083 Aluminum Alloy Welded Joints[J]. Development and Application of Materials, 2022, 37(4): 71-76.
    [3]YANG Qingyun, YUAN Wei, MA Junpu, ZHANG Zhiyuan. Numerical Simulation and Process Optimization on Hot Forming for CuNi90/10 Sock Welding Tee[J]. Development and Application of Materials, 2021, 36(6): 26-30,35.
    [4]MA Xiaoyang, LI Zhi, XUE Gang, WU Yanming. Study on the Distribution Heterogeneity of Alloy Elements in Laser-GMAW Hybrid Welding[J]. Development and Application of Materials, 2020, 35(5): 87-91.
    [5]ZHANG Chunlin, REN Shuwang, FAN Fangxiong, WANG Xinpeng, CHEN Shuaichao. Influence of Hot Forming Parameters on the Corrosion Resistance of C-276 Alloy[J]. Development and Application of Materials, 2017, 32(6): 62-68. DOI: 10.19515/j.cnki.1003-1545.2017.06.012
    [6]WU Yan-ming, ZHANG Cheng-jie, HAO Jian. Study on Process Stability of 10CrNiMoV Steel by Hybrid Laser-MAG（pulsed）Welding[J]. Development and Application of Materials, 2014, 29(4): 20-24. DOI: 10.19515/j.cnki.1003-1545.2014.04.005
    [7]HAO Jian, WU Yan-ming, XUE Gang, ZHANG Cheng-jie. Effect of laser power on the weld formation of laser-arc hybrid horizontal welding[J]. Development and Application of Materials, 2014, 29(1): 23-26. DOI: 10.19515/j.cnki.1003-1545.2014.01.005
    [8]LEI Xiao-wei, YANG Rui, QI Feng-hua, SUN Peng-peng, FU Hao, MA Yan-xia. Development of Advanced GMAW Technology[J]. Development and Application of Materials, 2013, 28(2): 93-98. DOI: 10.19515/j.cnki.1003-1545.2013.02.021
    [9]ZHANG Xiaodong, HUO Guangrui. Effect of Pulse Parameters on Metal Transfer of High Strength Austenitic MIG Wire[J]. Development and Application of Materials, 2013, 28(1): 15-19. DOI: 10.19515/j.cnki.1003-1545.2013.01.004
    [10]YUAN Yu-lan, WANG Xi-bao, ZHU Dong-mei, LIU Dan. Effect of Activating Flux on Appearance of Welds and Spatter in CO2 Arc Welding[J]. Development and Application of Materials, 2006, 21(1): 24-27,30. DOI: 10.19515/j.cnki.1003-1545.2006.01.007

  • Cited by

    Periodical cited type(2)

    1. 张裕，郭少飞，孙磊，关皓真. 船用高强钢GMAW-P脉冲焊接参数对电弧弧长的影响研究. 金属制品. 2024(02): 44-49 .
    2. 关皓真，张裕，孙磊，吴艳明. 脉冲熔化极气体保护焊弧长神经网络建模及参数预测. 材料开发与应用. 2024(03): 28-35 . 本站查看

    Other cited types(2)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (178) PDF downloads (13) Cited by(4)
    Related

    Copyright © 《Development and Application of Materials》豫ICP备13020589号-2

    Adress: No.169, Binhe South Road, Luolong District, Luoyang City, Henan Province，China  Tel: (0379)67256265;  (0379)67256345  Email: TG023@163.com

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return