Citation: | XIE Bin, WANG Desheng, WANG Pengyun, XIE Shufeng. Mechanical Properties and Corrosion Behavior of B4Cp/7050Al Aluminum Matrix Composites[J]. Development and Application of Materials, 2023, 38(2): 38-43. |
[1] |
张文毓. 铝基复合材料国内外技术水平及应用状况[J]. 航空制造技术, 2015, 58(3):82-85.
|
[2] |
王东山, 薛向欣, 刘然, 等. B4C/Al复合材料的研究进展及展望[J]. 材料导报, 2007, 21(S1):388-390.
|
[3] |
申世军, 钱小明, 陈登海, 等. 碳纳米管/铝基复合材料阳极氧化与耐腐蚀性能[J]. 电焊机, 2020, 50(1):42-46.
|
[4] |
邓小云. (Cf+Tip)/6061Al复合材料高温力学性能及耐腐蚀性能研究[D]. 哈尔滨:哈尔滨工业大学, 2014.
|
[5] |
刘维镐, 陈电玲. 高阻尼铝基复合材料在海水中的腐蚀行为[J].功能材料与器件学报, 2001, 7(2):195-198.
|
[6] |
贺春林, 刘常升, 李凤琴, 等. SiCp/Al基复合材料的耐蚀性研究[J]. 材料保护, 2001, 34(12):8-10.
|
[7] |
郎玉婧, 崔华, 蔡元华, 等. 7050铝合金在不同温度变形的动态析出行为[J]. 材料研究学报, 2012, 26(2):143-148.
|
[8] |
张克伟, 佘欢, 刘宏亮, 等. Si含量对高强高韧7050铝合金组织和力学性能的影响[J]. 上海交通大学学报, 2013, 47(11):1712-1716.
|
[9] |
BIRBILIS N, CAVANAUGH M K, BUCHHEIT R G. Electrochemical behavior and localized corrosion associated with Al7Cu2Fe particles in aluminum alloy 7075-T651[J]. Corrosion Science, 2006, 48(12):4202-4215.
|
[1] | ZHANG Xiaopeng, YANG Chao, LI Zhenshuai, BAO Shuai, CHEN Yungui. Microstructure and Mechanical Properties of High-Silicon Heat-Resistant Mg-9Al-3Si Magnesium Alloy by Rapid Solidification and Hot Extrusion Processes[J]. Development and Application of Materials, 2024, 39(5): 31-38. |
[2] | SUN Yuchu, CHEN Yungui. Microstructure and Mechanical Characteristics of Rapidly Solidified AZ31 Magnesium Alloy[J]. Development and Application of Materials, 2024, 39(2): 44-49. |
[3] | TAO Huan, SONG Dejun, XU Feifan, LI Chong, YU Yan. Effects of Extrusion on Microstructure and Properties of Ti75 Alloy Tubes[J]. Development and Application of Materials, 2020, 35(5): 7-11. |
[4] | LI Xiaoping, ZHANG Yajun, ZHANG Jiuhai, XIE Xinpu, LI Jixian. Study on Processing Technology of Ta40Nb Alloy Pipe for Heat Exchanger[J]. Development and Application of Materials, 2019, 34(6): 49-52. DOI: 10.19515/j.cnki.1003-1545.2019.06.010 |
[5] | XU Guangchen, CUI Yu, HAN Liang. Analysis of Extrusion Processing of Automobile Piston Rod Based on Deform[J]. Development and Application of Materials, 2017, 32(1): 89-93. DOI: 10.19515/j.cnki.1003-1545.2017.01.016 |
[6] | XUE Xu-bin, YAO Shang-wei, FAN Hui-qing, XU Fei. Study on Structures and Hardness of Cladding Layer by one Build-up Welding Electrode Used for Repairing of Hot Forging Die[J]. Development and Application of Materials, 2010, 25(6): 15-18. DOI: 10.19515/j.cnki.1003-1545.2010.06.004 |
[7] | AN Lin-lin, YANG Su-yuan. Study on Dynamic Vickers Hardness of As-extruded Mg-10Gd-3Y Alloy[J]. Development and Application of Materials, 2010, 25(5): 12-15. DOI: 10.19515/j.cnki.1003-1545.2010.05.004 |
[8] | YAN Fei-hao, LI Liang, LIAO Zhi-qian, JIANG Peng. Progresses of Study on the Technology of Equal Channel Angular Extrusion[J]. Development and Application of Materials, 2010, 25(4): 82-86. DOI: 10.19515/j.cnki.1003-1545.2010.04.020 |
[9] | LU Min-song, XU Yu-song, ZHI Hai-jun, ZHENG Li-fen. Effects of Chamber Structure on CONFORM Process for Cu-Ag Alloy[J]. Development and Application of Materials, 2010, 25(3): 22-26,40. DOI: 10.19515/j.cnki.1003-1545.2010.03.006 |
[10] | Xiao Daihong, Wang Jiannong, Chen Shipo, Yang Hailong, Ding Dongyan. Effect of Metalized Ag on Microstructure and Properties of Heat Resistant Al-Cu-Mg Alloy Before and After Hot Extrusion[J]. Development and Application of Materials, 2002, 17(6): 1-4. DOI: 10.19515/j.cnki.1003-1545.2002.06.001 |