板片表面缺陷尺度对印刷板式换热器扩散焊接的影响研究

李秋龙; 徐哲; 郭继冠; 刘向前; 李培跃; 郁炎

板片表面缺陷尺度对印刷板式换热器扩散焊接的影响研究

中国船舶重工集团公司第七二五研究所, 河南洛阳 471023

详细信息

作者简介:
李秋龙,男,1988年生,硕士,主要从事特种高效换热技术和装备的研发

中图分类号: TG453
计量
- 文章访问数: 67
- HTML全文浏览量: 7
- PDF下载量: 11
- 被引次数: 0
出版历程
- 收稿日期: 2020-07-01
- 刊出日期: 2021-04-25

Research on Effect of Defect Dimension on Diffusion Bonding of Printed Circuit Heat Exchanger

Luoyang Ship Material Research Institute, Luoyang 471023, China

摘要

摘要: 针对印刷板式换热器换热板片表面缺陷的尺度问题，开展试验分析研究，重点研究了板片表面缺陷宽度对换热器芯体扩散焊性能的影响规律，从拉伸强度和微观界面组织两个方面阐述了缺陷宽度对扩散焊接的影响情况。结果表明，当缺陷深度小于0.1 mm，宽度小于0.82 mm时，表面缺陷不影响印刷板式换热器的焊接性能。
- 印刷板式换热器 /
- 扩散焊接 /
- 316L不锈钢 /
- 表面缺陷
Abstract: To analyze the scale problem of surface defect of heat exchanger plate of PCHE, experimental analysis and research were carried out. The influence of surface defect width of plate on diffusion bonding performance of heat exchanger core mainly studied from two aspects of tensile strength and micro-interface structure. The results showed that when the defect depth was less than 0.1 mm and the width less than 0.82 mm, the surface defect had no influence on the weldability of the PCHE.
- PCHE /
- diffusion bonding /
- 316L stainless steel /
- surface defect

HTML全文

参考文献(16)

[1]	ANEESH A M,SHARMA A,SRIVASTAVA A,et al.Effects of wavy channel configurations on thermal-hydraulic characteristics of printed circuit heat exchanger (PCHE)[J].International Journal of Heat and Mass Transfer,2018,118:304-315.
[2]	CUI X Y,GUO J F,HUAI X L,et al.Numerical study on novel airfoil fins for printed circuit heat exchanger using supercritical CO₂[J].International Journal of Heat and Mass Transfer,2018,121:354-366.
[3]	AHN Y,BAE S J,KIM M,et al.Review of supercritical CO₂ power cycle technology and current status of research and development[J].Nuclear Engineering and Technology,2015,47(6):647-651.
[4]	CHEN F,ZHANG L S,HUAI X L,et al.Comprehensive performance comparison of airfoil fin PCHEs with NACA 00XX series airfoil[J].Nuclear Engineering and Design,2017,315:42-50.
[5]	HALIMI B,SUH K Y.Computational analysis of supercritical CO₂ Brayton cycle power conversion system for fusion reactor[J].Energy Conversion and Management,2012,63(11):38-43.
[6]	JEON S,BAIK Y J,CHAN B,et al.Thermal performance of heterogeneous PCHE for supercritical CO₂ energy cycle[J].International Journal of Heat and Mass Transfer,2016,102:867-876.
[7]	KIM W,BAIK Y J,JEON S,et al.A mathematical correlation for predicting the thermal performance of cross,parallel,and counterflow PCHEs[J].International Journal of Heat and Mass Transfer,2017,106:1294-1302.
[8]	SOUTHALL D,DEWSON S J.Innovative compact heat exchangers[C].Proceedings of ICAPP,San Diego,USA,2010.
[9]	FIGLEY J,SUN X D,MYLAVARAPU S K,et al.Numerical study on thermal hydraulic performance of a printed circuit heat exchanger[J].Progress in Nuclear Energy,2013,68:89-96.
[10]	XU X Y,MA T,LI L,et al.Optimization of fin arrangement and channel configuration in an airfoil fin PCHE for supercritical CO₂ cycle[J].Applied Thermal Engineering,2014,70(1):867-875.
[11]	BAEK S,KIM J H,JEONG S,et al.Development of highly effective cryogenic printed circuit heat exchanger (PCHE) with low axial conduction[J].Cryogenics,2012,52(7):366-374.
[12]	SUNG J,LEE J Y.Effect of tangled channels on the heat transfer in a printed circuit heat exchanger[J].International Journal of Heat and Mass Transfer,2017,115:647-656.
[13]	MYLAVARAPU S K,SUN X,GLOSUP R E,et al.Thermal hydraulic performance testing of printed circuit heat exchangers in a high-temperature helium test facility[J].Applied Thermal Engineering,2014,65(1-2):605-614.
[14]	安子良,轩福贞,涂善东.316L不锈钢扩散焊接头的微观结构和力学性能[J].中国有色金属学报,2006,16(10):1765-1770.
[15]	黄毓晖,杨博,轩福贞,等.316L不锈钢扩散焊接头在酸性氯化钠溶液中的应力腐蚀行为[J].焊接学报,2011,32(7):67-70.
[16]	李淑欣,轩福贞,涂善东,等.316L不锈钢扩散连接接头界面疲劳裂纹扩展行为[J].材料科学与工艺,2010,18(1):141-144.