钛合金增材制造件的热等静压后处理工艺研究进展

段伟; 党理想; 周建新; 匡文军; 张帅锋; 计效园; 段现银; 谢文浩

钛合金增材制造件的热等静压后处理工艺研究进展

1. 西安交通大学材料科学与工程学院, 陕西西安 710049;
2. 中国船舶集团有限公司第七二五研究所, 河南洛阳 471023;
3. 武汉科技大学机械自动化学院, 湖北武汉 430081;
4. 华中科技大学材料成形与模具技术全国重点实验室, 湖北武汉 430074

详细信息

作者简介:
段伟,男,1983年生,副教授,硕士生导师,研究方向为钛合金增材制造及热等静压等。E-mail:duanwei@wust.edu.cn

中图分类号: TG146
计量
- 文章访问数: 93
- HTML全文浏览量: 7
- PDF下载量: 27
- 被引次数: 0
出版历程
- 收稿日期: 2023-10-31

Advancements in Hot Isostatic Pressing as Post-Processing Technique for Additively Manufactured Titanium Alloy Components

1. School of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China;
2. Luoyang Ship Material Research Institute, Luoyang 471023, China;
3. College of Science and Metallurgical Engineering, Wuhan University of Science and Technology, Wuhan 430081, China;
4. State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science & Technology, Wuhan 430074, China

摘要

摘要: 增材制造技术可实现复杂钛合金零件的成形,因此在航空、航天、船舶等领域的应用日益广泛。热等静压具有独特的热压耦合作用,使其能够在改善组织结构的同时,消除零件内孔缺陷,因此,逐渐被应用于增材制造零件的组织性能调控。本研究简述了钛合金增材制造件在组织、缺陷和性能上的特点,以及热等静压相对传统热处理技术在组织、缺陷和性能调控上的优势,为热等静压技术在钛合金增材制造件后处理过程中的应用提供了依据。
- 钛合金 /
- 增材制造 /
- 热等静压 /
- 后处理 /
- 性能调控
Abstract: The utilization of additive manufacturing has made it easier to manufacture intricate titanium alloy components, consequently leading to their widespread adoption in fields like aviation, aerospace, and shipbuilding. The unique thermal-mechanical coupling effect of hot isostatic pressing allows it to improve the microstructure and eliminate internal porosity defects in components, which is why it is gradually being used for the organizational performance control of additive manufacturing parts. In this study, a concise overview of the microstructure, defects, and performance of additive by manufactured titanium alloy parts is carried out, as well as the advantages of hot isostatic pressing over traditional heat treatment techniques in terms of microstructure, defects, and performance regulation. The study discovery lays the groundwork for employing hot isostatic pressing technology in the post-treatment procedure of titanium alloy parts produced by additive manufacturing.
- titanium alloy /
- additive manufacturing /
- hot isostatic pressing /
- post-processing /
- property regulation

HTML全文

参考文献(53)

[1]	DEBROY T, MUKHERJEE T, WEI H L, et al. Metallurgy, mechanistic models and machine learning in metal printing[J]. Nature Reviews Materials, 2020, 6(1): 48-68.
[2]	YAP C Y, CHUA C K, DONG Z L, et al. Review of selective laser melting: materials and applications[J]. Applied Physics Reviews, 2015, 2(4): 041101.
[3]	ATTAR H, LÖBER L, FUNK A, et al. Mechanical behavior of porous commercially pure Ti and Ti-TiB composite materials manufactured by selective laser melting[J]. Materials Science and Engineering: A, 2015, 625: 350-356.
[4]	XIN R Y, LAN L, BAI C Y, et al. Fatigue properties of selective laser melted Ti-6Al-4V alloy subjected to laser shock processing[J]. Journal of Materials Science, 2022, 57(21): 9619-9630.
[5]	ZHANG T M, HUANG H L, HOSSEINI S R E, et al. Obtaining heterogeneous α laths in selective laser melted Ti-5Al-5Mo-5V-1Cr-1Fe alloy with high strength and ductility[J]. Materials Science and Engineering: A, 2022, 835: 142624.
[6]	SONG T T, CHEN Z B, CUI X Y, et al. Strong and ductile titanium–oxygen–iron alloys by additive manufacturing[J]. Nature, 2023, 618(7963): 63-68.
[7]	SURYAWANSHI J, PRASHANTH K G, RAMAMU-RTY U. Mechanical behavior of selective laser melted 316L stainless steel[J]. Materials Science and Engineering: A, 2017, 696: 113-121.
[8]	GOKULDOSS PRASHANTH K, SCUDINO S, ECKERT J. Tensile properties of Al-12Si fabricated via selective laser melting (SLM) at different temperatures[J]. Technologies, 2016, 4(4): 38.
[9]	MURRAY T, THOMAS S, WU Y X, et al. Selective laser melting of nickel aluminium bronze[J]. Additive Manufacturing, 2020, 33: 101122.
[10]	ZHANG Q Q, HAO S J, LIU Y T, et al. The microstructure of a selective laser melting (SLM)-fabricated NiTi shape memory alloy with superior tensile property and shape memory recoverability[J]. Applied Materials Today, 2020, 19: 100547.
[11]	刘景博, 刘世锋, 杨鑫, 等. 金属增材制造技术轻量化应用研究进展[J]. 中国材料进展, 2020, 39(2): 163-168.
[12]	GURRAPPA I. Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications[J]. Materials Characterization, 2003, 51(2-3): 131-139.
[13]	CHASTAND V, QUAEGEBEUR P, MAIA W, et al. Comparative study of fatigue properties of Ti-6Al-4V specimens built by electron beam melting (EBM) and selective laser melting (SLM)[J]. Materials Characterization, 2018, 143: 76-81.
[14]	SU C Y, YU H C, WANG Z M, et al. Controlling the tensile and fatigue properties of selective laser melted Ti-6Al-4V alloy by post treatment[J]. Journal of Alloys and Compounds, 2021, 857: 157552.
[15]	YAN X C, YIN S, CHEN C Y, et al. Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting[J]. Journal of Alloys and Compounds, 2018, 764: 1056-1071.
[16]	张海英, 董登科, 苏少普, 等. 后处理对激光选区熔化成形Ti-6Al-4V钛合金力学性能的影响[J]. 机械强度, 2019, 41(6): 1341-1344.
[17]	YAN T Q, CHEN B Q, JI X, et al. Influence of hot isostatic pressing on microstructure, properties and deformability of selective laser melting TC4 alloy[J]. China Foundry, 2021, 18(4): 389-396.
[18]	YU H C, LI F Z, WANG Z M, et al. Fatigue performances of selective laser melted Ti-6Al-4V alloy: influence of surface finishing, hot isostatic pressing and heat treatments[J]. International Journal of Fatigue, 2019, 120: 175-183.
[19]	LALEH M, SADEGHI E, REVILLA R I, et al. Heat treatment for metal additive manufacturing[J]. Progress in Materials Science, 2023, 133: 101051.
[20]	YAN X C, SHI C B, LIU T K, et al. Effect of heat treatment on the corrosion resistance behavior of selective laser melted Ti6Al4V ELI[J]. Surface and Coatings Technology, 2020, 396: 125955.
[21]	GONG H J, RAFI K, GU H F, et al. Influence of defects on mechanical properties of Ti-6Al-4 V components produced by selective laser melting and electron beam melting[J]. Materials & Design, 2015, 86: 545-554.
[22]	GONG H J, RAFI K, GU H F, et al. Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes[J]. Additive Manufacturing, 2014, 1-4: 87-98.
[23]	THIJS L, VERHAEGHE F, CRAEGHS T, et al. A study of the microstructural evolution during selective laser melting of Ti-6Al-4V[J]. Acta Materialia, 2010, 58(9): 3303-3312.
[24]	杨晶晶, 喻寒琛, 韩婕, 等. 激光选区熔化成形TC4合金的β转变温度[J]. 材料热处理学报, 2016, 37(9): 80-85.
[25]	魏青松, 周燕, 朱文志. 粉末床激光选区熔化成形典型金属材料的组织与性能[M]. 北京: 国防工业出版社, 2021.
[26]	任永明. 高功率激光立体成形Ti-6Al-4V合金组织及低周疲劳性能[D]. 西安:西北工业大学, 2019.
[27]	TAN X P, KOK Y, TAN Y J, et al. Graded microstructure and mechanical properties of additive manufactured Ti-6Al-4V via electron beam melting[J]. Acta Materialia, 2015, 97: 1-16.
[28]	YAN X C, LUPOI R, WU H J, et al. Effect of hot isostatic pressing (HIP) treatment on the compressive properties of Ti6Al4V lattice structure fabricated by selective laser melting[J]. Materials Letters, 2019, 255: 126537.
[29]	ZHAO X L, LI S J, ZHANG M, et al. Comparison of the microstructures and mechanical properties of Ti-6Al-4V fabricated by selective laser melting and electron beam melting[J]. Materials & Design, 2016, 95: 21-31.
[30]	BRENNAN M, KEIST J S, PALMER T A. Defects in metal additive manufacturing processes[M]//Additive Manufacturing Processes. ASM International, 2020: 277-286.
[31]	CUNNINGHAM R, ZHAO C, PARAB N, et al. Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed X-ray imaging[J]. Science, 2019, 363(6429): 849-852.
[32]	赵春玲, 李维, 王强, 等. 激光选区熔化成形钛合金内部缺陷及其演化规律研究[J]. 稀有金属材料与工程, 2021, 50(8): 2841-2849.
[33]	TAMMAS-WILLIAMS S, WITHERS P J, TODD I, et al. The effectiveness of hot isostatic pressing for closing porosity in titanium parts manufactured by selective electron beam melting[J]. Metallurgical and Materials Transactions A, 2016, 47(5): 1939-1946.
[34]	CHAUVET E, KONTIS P, JÄGLE E A, et al. Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting[J]. Acta Materialia, 2018, 142: 82-94.
[35]	KING W E, BARTH H D, CASTILLO V M, et al. Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing[J]. Journal of Materials Processing Technology, 2014, 214(12): 2915-2925.
[36]	FU J, LI H, SONG X, et al. Multi-scale defects in powder-based additively manufactured metals and alloys[J]. Journal of Materials Science & Technology, 2022, 122: 165-199.
[37]	段伟. TC4合金SLM成形过程温度场数值模拟及缺陷、组织与力学性能的研究[D]. 武汉:华中科技大学, 2020.
[38]	DINDA G P, SONG L, MAZUMDER J. Fabrication of Ti-6Al-4V scaffolds by direct metal deposition[J]. Metallurgical and Materials Transactions A, 2008, 39(12): 2914-2922.
[39]	YADROITSEV I, KRAKHMALEV P, YADROITSA-VA I. Selective laser melting of Ti6Al4V alloy for biomedical applications: temperature monitoring and microstructural evolution[J]. Journal of Alloys and Compounds, 2014, 583: 404-409.
[40]	吕周晋, 李好峰, 车立达, 等. HIP温度对SLM制备TC4钛合金组织和力学性能的影响[J]. 金属热处理, 2022, 47(6): 138-142.
[41]	VRANCKEN B, THIJS L, KRUTH J P, et al. Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties[J]. Journal of Alloys and Compounds, 2012, 541: 177-185.
[42]	NG C H, BERMINGHAM M J, DARGUSCH M S. Controlling grain size, morphology and texture in additively manufactured β-titanium alloy with super transus hot isostatic pressing[J]. Additive Manufacturing, 2022, 59: 103176.
[43]	ZHAO Z Y, LI L, BAI P K, et al. The heat treatment influence on the microstructure and hardness of TC4 titanium alloy manufactured via selective laser melting[J]. Materials, 2018, 11(8): 1318.
[44]	刘立斌, 白伟民, 曾丽君. 钛合金热力学与动力学数据库的建立和应用[M]. 长沙: 中南大学出版社, 2021.
[45]	ZHANG M L, NG C H, DEHGHAN-MANSHADI A, et al. Towards isotropic behaviour in Ti-6Al-4V fabricated with laser powder bed fusion and super transus hot isostatic pressing[J]. Materials Science and Engineering: A, 2023, 874: 145094.
[46]	WU M W, LAI P H. The positive effect of hot isos-tatic pressing on improving the anisotropies of bending and impact properties in selective laser melted Ti-6Al-4V alloy[J]. Materials Science and Engineering: A, 2016, 658: 429-438.
[47]	DU PLESSIS A, MACDONALD E. Hot isostatic pres-sing in metal additive manufacturing: X-ray tomography reveals details of pore closure[J]. Additive Manufacturing, 2020, 34: 101191.
[48]	YAN X C, YUE S J, GE J G, et al. Microstructural and mechanical optimization of selective laser melted Ti6Al4V lattices: effect of hot isostatic pressing[J]. Journal of Manufacturing Processes, 2022, 77: 151-162.
[49]	TOSI R, LEUNG C L A, TAN X P, et al. Revealing the microstructural evolution of electron beam powder bed fusion and hot isostatic pressing Ti-6Al-4V in situ shelling samples using X-ray computed tomog-raphy[J]. Additive Manufacturing, 2022, 57: 102962.
[50]	KASPEROVICH G, HAUSMANN J. Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting[J]. Journal of Materials Processing Technology, 2015, 220: 202-214.
[51]	MORAN T P, CARRION P E, LEE S, et al. Hot isostatic pressing for fatigue critical additively manufactured Ti-6Al-4V[J]. Materials, 2022, 15(6): 2051.
[52]	BENZING J, HRABE N, QUINN T, et al. Hot isostatic pressing (HIP) to achieve isotropic microstructure and retain as-built strength in an additive manufacturing titanium alloy (Ti-6Al-4V)[J]. Materials Letters, 2019, 257: 126690.
[53]	LU S L, TANG H P, NAI S M L, et al. Intensified texture in selective electron beam melted Ti-6Al-4V thin plates by hot isostatic pressing and its fundamental influence on tensile fracture and properties[J]. Materials Characterization, 2019, 152: 162-168.