生产工艺对爆炸复合用钛板的影响研究

Research of the Effect of Processing Routes on the Ti Clad Plate

摘要: 对比热轧和卷轧工艺技术,研究了不同生产方式对爆炸复合用钛板性能和组织的影响。结果表明:块式热轧生产钛板的效果最好,炉卷轧制方式次之,但其生产率和成品率高;少量添加回收料可批量生产合格的钛板,但伸长率的富裕量降低。因此,需要严格控制原料成分,并选择适宜的生产工艺方式,以确保钛板性能满足爆炸复合要求。
- 钛钢复合板 /
- 热轧 /
- 性能
Abstract: After contrasting hot rolling and coiling rolling technology, the effects of deferent processing routes on the properties and microstructures of Ti clad plate were investigated. The results indicated that, the best effect of processing Ti clad plate was block hot rolling by heating furnace, while the coiling rolling Ti plate by heating furnace was better than the coiling rolling without heating furnace, which had higher productivity and finished product rate; the qualified batch processing Ti plates were produced after adding a few recycled materials with decreasing affluent plasticity, therefore, the lower impurity and better processing routes were recommended to produce Ti clad plate.
- Ti-steel clad plate /
- hot rolling /
- property

[1]	张宝军, 樊科社, 庞国庆, 等. 烟囱用钛/钢复合板坡口机加工艺的改进[J]. 钛工业进展, 2020, 37(3): 25-28.
[2]	王茹, 樊科社, 吴江涛, 等. 相控阵技术在爆炸焊接钛/钢复合板检测中的应用[J]. 钛工业进展, 2021, 38(2): 30-33.
[3]	胡奉雅,许国敬,陈伟,等,钛/钢复合板焊接技术研究现状及发展趋势[J]. 焊接学报,2021,42(6):30-43.
[4]	张喜燕, 赵永庆, 白晨光. 钛合金及应用[M]. 北京: 化学工业出版社, 2005.
[5]	王怀柳. 间隙杂质对工业纯钛性能的影响[J]. 特钢技术,2006,12(3):25-27.
[6]	徐国富,周丽旗,李旭,等.微量杂质在工业纯钛中的存在形式及其对力学性能的影响[J]. 粉末冶金材料科学与工程,2016,21(5):672-677.