Study on Mechanical Behavior of Lattice Reinforced Foam Sandwich Composite under Hydrostatic Pressure
-
摘要: 点阵增强泡沫夹芯复合材料在保留传统夹芯结构高比刚度、比强度的基础上,极大地提高了其Z方向的力学性能,同时具有很好的结构功能可设计性,可以满足一些特殊极端工况的需要。通过对点阵增强泡沫夹芯复合材料静水压下的力学行为进行试验探究,得到不同水压下Z方向形变和面内应力的大小。基于ABAQUS有限元软件建立了点阵增强泡沫夹芯复合材料仿真模型,从有限元角度对其静水压作用下的力学行为进行了模拟与分析,并对点阵受力情况进行预测。模拟结果与试验相近,验证了有限元模型的合理性、可靠性,为该种材料的工程仿真设计奠定了一定基础。Abstract: The Z-direction lattice reinforced foam sandwich composite material retains the high specific stiffness and strength of the traditional sandwich structure, and greatly improves its Z-direction mechanical properties. At the same time, it has good structural and functional designability to meet the needs of some special extreme conditions. In this paper, the underwater performance of the Z-direction reinforced foam sandwich composite under hydrostatic pressure is experimentally investigated, and the Z-direction deformation and in-plane stress under different pressures are obtained. And based on ABAQUS finite element software, the test simulation model of a Z-direction lattice reinforced foam sandwich composite material under hydrostatic pressure is established, its mechanical behavior is simulated and analyzed from the perspective of finite element, and the force situation of the lattice predicted. The simulation results are similar to that of the experiment, verifying the rationality and reliability of the finite element model, and laying the foundation for the engineering simulation design of materials of this kind.
-
Key words:
- Z-direction lattice enhancement /
- finite element /
- hydrostatic pressure
-
[1] 李飘.Z向增强复合材料夹芯板的力学与声学特性研究[D].武汉:华中科技大学,2013. [2] 朱子旭,朱锡,李永清,等.复合材料夹芯结构研究现状及其在船舶工程的应用[J].舰船科学技术,2018,40(3):1-7. [3] 赵锐霞,尹亮,潘玲英.PMI泡沫夹层结构在航天航空工业的应用[J].宇航材料工艺,2011,41(2):13-16. [4] STANLEY L E,ADAMS D O.Development and Evaluation of Stitched Sandwich Panels.NASA/ CR 2001,211025.Washington:NASA,2001. [5] LI B,LI Z,ZHOU J,et al.Damage localization in composite lattice truss core sandwich structures based on vibration characteristics[J].Composite Structures,2015,126:34-51. [6] O'BRIEN T K,PARIS I L.Exploratory investigation of failure mechanisms in transition regions between solid laminates and X-cor© truss sandwich[J].Composite Structures,2002,57(1-4):189-204. [7] 季苏东,李敏,孙志杰,等.斜缝与Z-pin混合增强泡沫夹层复合材料力学性能试验研究[J].复合材料学报,2010,27(4):87-93. [8] MEI J,LIU J Y,LIU J L.A novel fabrication method and mechanical behavior of all-composite tetrahedral truss core sandwich panel[J].Composites Part A:Applied Science and Manufacturing,2017,102:28-39. [9] DAYNES S,FEIH S,LU W F,et al.Optimisation of functionally graded lattice structures using isostatic lines[J].Materials & Design,2017,127:215-223. [10] YUAN W,SONG H W,HUANG C G.Failure maps and optimal design of metallic sandwich panels with truss cores subjected to thermal loading[J].International Journal of Mechanical Sciences,2016,115-116:56-67. [11] ZHOU J,GUAN Z W,CANTWELL W J,et al.The energy-absorbing behaviour of foam cores reinforced with composite rods[J].Composite Structures,2014,116:346-356. [12] ALIA R A,CANTWELL W J,LANGDON G S,et al.The energy-absorbing characteristics of composite tube-reinforced foam structures[J].Composites Part B:Engineering,2014,61:127-135. [13] 王兵.纤维柱增强复合材料夹芯结构的制备工艺及力学性能研究[D].哈尔滨:哈尔滨工业大学,2010. [14] 魏笔.消声瓦静水压下变形计算及其试验研究[D].武汉:华中科技大学,2012. [15] HASHIN Z.Failure criteria for unidirectional fiber composites[J].Journal of Applied Mechanics,1980,47(2):329-334. [16] DESHPANDE V S,FLECK N A.Isotropic constitutive models for metallic foams[J].Journal of the Mechanics and Physics of Solids,2000,48(6-7):1253-1283. -
点击查看大图
计量
- 文章访问数: 135
- HTML全文浏览量: 17
- PDF下载量: 10
- 被引次数: 0
下载:
