碳纤维编织复合材料层合板抗侵彻性能研究

罗锡林; 魏建辉; 李飘; 刘志康; 刘加一

碳纤维编织复合材料层合板抗侵彻性能研究

1. 武汉第二船舶设计研究所, 湖北武汉 430064;
2. 华中科技大学船舶与海洋工程学院, 湖北武汉 430074

详细信息

作者简介:
罗锡林,男,1986年生,博士,高级工程师,主要从事船舶复合材料结构设计。

中图分类号: TB332
计量
- 文章访问数: 69
- HTML全文浏览量: 30
- PDF下载量: 12
- 被引次数: 0
出版历程
- 收稿日期: 2023-04-28
- 网络出版日期: 2023-09-13

Study on Penetration Resistance of Carbon Fiber Braided Composite Laminates

1. Wuhan Second Ship Design and Research Institute, Wuhan 430064, China;
2. School of Naval Architecture and Ocean Engineering, Huazhong University of Science and Technology, Wuhan 430074, China

摘要

摘要: 通过弹道冲击实验开展了碳纤维编织复合材料层合板的抗侵彻性能研究,进行了动态响应分析和损伤模式分析。建立了基于Hashin失效和Yeh分层失效准则的渐进损伤模型,运用ABAQUS有限元软件模拟了碳纤维编织复合材料层合板的侵彻失效过程,采用Lambert-Jonas公式拟合了柱状弹侵彻层合板弹道极限曲线,对比分析了碳纤维编织复合材料层合板侵彻实验与数值模拟的弹道极限速度及损伤形貌。结果表明,层合板侵彻损伤模式主要为分层、纤维断裂和基体开裂失效,弹道极限速度数值模拟结果与实验结果吻合较好。
- 碳纤维编织复合材料 /
- 抗侵彻 /
- 弹道极限曲线 /
- 损伤模式
Abstract: The penetration resistance of the carbon fiber braided composite laminates is studied by ballistic impact experiment. The trajectory limit curve of the carbon fiber braided composites is fitted according to the Lambert-Jonas formula. The damage pattern and mechanism of the carbon fiber braided composites are analyzed. The progressive damage model based on failure criterion of Hashin and Yeh is set up. The penetration process of the carbon fiber braided composite is simulated by the finite element software ABAQUS, and the ballistic limit velocity and damage morphology of the carbon fiber braided composites are compared between penetration test and simulation. Experimental and simulation results show that the damage modes mainly include delamination failure, fiber fracture failure and matrix cracking failure. The ballistic limit velocity of the simulation results matches well with that of the experimental results.
- carbon fiber braided composites /
- penetration resistance /
- trajectory limit curve /
- damage pattern

HTML全文

参考文献(12)

[1]	尹红灵. 热塑性碳纤维编织复合材料热压成型研究[D]. 上海:上海交通大学, 2016.
[2]	WIELEWSKI E, BIRKBECK A, THOMSON R. Ballistic resistance of spaced multi-layer plate structures:experiments on Fibre Reinforced Plastic targets and an analytical framework for calculating the ballistic limit[J]. Materials & Design, 2013, 50:737-741.
[3]	权国政, 武东森, 李贵胜. E-玻璃纤维2D编织层铺增强复合材料的损伤力学本构模型及应用[J]. 机械工程材料, 2014, 38(4):67-72.
[4]	杨光猛, 赵美英, 万小朋. 平纹编织复合材料层板高速冲击损伤机理研究[J]. 玻璃钢/复合材料, 2018(4):21-26.
[5]	程小全, 邹健, 许延敏, 等. 含孔平面编织混杂铺层层合板压缩破坏仿真[J]. 力学学报, 2007, 39(6):829-834.
[6]	刘遂, 关志东, 郭霞, 等. 平面编织混杂铺层层板穿透挖补修理参数分析[J]. 北京航空航天大学学报, 2013, 39(2):248-253.
[7]	XIAO D B, CHEN X Q, LI Y, et al. The structure response of sandwich beams with metallic auxetic honeycomb cores under localized impulsive loading-experiments and finite element analysis[J]. Materials & Design, 2019, 176:107840.
[8]	CAPUTO F, GENNARO D F, LAMANNA G, et al. Numerical procedures for damage mechanisms analysis in CFRP composites[J]. Key Engineering Materials, 2013, 569-570:111-118.
[9]	MEI J E, LIU J Y, LIU J L. A novel fabrication me-thod and mechanical behavior of all-composite tetrahedral truss core sandwich panel[J]. Composites Part A:Applied Science and Manufacturing, 2017, 102:28-39.
[10]	YU S, YU X F, AO Y L, et al. The impact resistance of composite Y-shaped cores sandwich structure[J]. Thin-Walled Structures, 2021, 169:108389.
[11]	RICCIO A, DI FELICE G, SAPUTO S, et al. Sta-cking sequence effects on damage onset in composite laminate subjected to low velocity impact[J]. Procedia Engineering, 2014, 88:222-229.
[12]	杨万春. 碳纤维复合材料双箭头拉胀结构的弹道冲击响应和失效机理研究[D].武汉:华中科技大学,2022.