Corrosion Factor Analysis of Heat Exchange Tubes of Open Rack Vaporizer
-
摘要: 目前,开架式气化器换热管的长效防护措施是在其表面制备铝及其合金的涂层。由于长期置于海洋环境下,换热管表面的铝基涂层会出现点蚀、鼓包、脱落及厚度减薄现象,可能危及设备安全高效运行。通过分析影响开架式气化器换热管腐蚀的因素,如海水含沙量、海水流速、离子种类、海水PH值等,这对换热管的腐蚀机理研究、防护层寿命评估、设备使用状态的监控及日常运行维护提供一定的理论支撑。Abstract: At present, the long-term protection measure for the heat exchange tubes of open rack vaporizers (ORV) is to prepare aluminum and its alloy coatings on their surfaces. Due to the long-term exposure to the marine environment, the aluminu-mbased coating on the surface of the heat exchange tube will appear pitting, bulging, shedding, and thinning, which may threaten the safe and efficient operation of the equipment. Here, the factors that affect the corrosion of ORV heat exchange tubes are analyzed, such as sand content of seawater, flow rate of seawater, ion species, and PH value of seawater, etc. The results can provide certain theoretical support for the corrosion mechanism research, life evaluation of protection layer, equipment status monitoring, and daily operation and maintenance of the heat exchange tubes.
-
Key words:
- open rack vaporizers /
- heat exchange tubes /
- corrosion factors
-
[1] KESTEN D.A Clean Fue-LNG[J].MesserSAIC, 2000, 5(8):27-28. [2] 高振宇,高鹏,刘倩,等.中国LNG产业现状分析及发展建议[J].天然气技术与经济, 2019, 13(6):14-19. [3] 单彤文.中国LNG产业链核心技术发展现状与关键技术发展方向[J].中国海上油气, 2020, 32(4):190-196. [4] 张尚文.液化天然气开架式气化器工艺研究和设计[J].石油化工设备, 2012, 41(3):25-29. [5] 龙晋明,郭忠诚,樊爱民,等.牺牲阳极材料及其在金属防腐工程中的应用[J].云南冶金, 2002, 31(3):142-148. [6] 梅伟伟,郭海涛,李云龙,等.ORV涂层损坏原因分析及现场修复实践[J].天然气技术与经济, 2017, 11(S1):44-47. [7] 吴永忠.LNG接收站海水开架式气化器(ORV)涂层失效分析和可靠性评估[J].中国特种设备安全, 2014:96-99, 104. [8] REBOUL M C, GIMENEZ P, RAMEAU J J.A pr-oposed activation mechanism for Al anodes[J].CORROSION, 1984, 40(7):366-371. [9] 王曰义.铝合金在流动海水中的腐蚀行为[J].装备环境工程, 2005, 2(6):72-76. [10] NEVILLE A, HODGKIESS T, DALLAS J T.A study of the erosion-corrosion behaviour of engineering steels for marine pumping applications[J].Wear, 1995, 186-187:497-507. [11] ZHENG Y G, YAO Z M, WEI X Y, et al.The synergistic effect between erosion and corrosion in acidic slurry medium[J].Wear, 1995, 186-187:555-561. [12] 郑玉责,姚治铭,何莉,等.泥浆型冲蚀中冲刷和腐蚀交互作用研究综述[J].材料科学与工程, 1994, 12(4):27-31. [13] DATTA J, SAMANTA B, JANA A, et al.Role of Cl- and NO-3 ions on the corrosion behavior of 20% SiCp reinforced 6061-Al metal matrix composite:a correlation between electrochemical studies and atomic force microscopy[J].Corrosion Science, 2008, 50(9):2658-2668. [14] 云凤玲,徐克.重金属离子对5052铝合金耐蚀性能的影响[J].化学工业与工程, 2010, 27(2):173-176. [15] 张成伟,马铁轮,盖晓峰,等.LNG接收站开架式气化器在高含沙海水工况下使用的探讨[J].石油工程建设, 2007, 33(6):8-10. [16] 龚敏.冲刷腐蚀的某些影响因素及其研究方法[J].四川轻化工学院学报, 1995, 8(1):53-59. [17] 丁一刚,王慧龙,郭兴蓬,等.金属在液固两相流中的冲刷腐蚀[J].材料保护, 2001, 34(11):16-18. [18] JIANG X, ZHENG Y G, QU D R, et al.Effect of calcium ions on pitting corrosion and inhibition performance in CO2 corrosion of N80 steel[J].Corrosion Science, 2006, 48(10):3091-3108. [19] 云凤玲,徐克.Cu2+和Fe3+离子对5052铝合金耐海水腐蚀性能的影响[C].海峡两岸材料腐蚀与防护研讨会, 2010. [20] AHMED Z.Corrosion and corrosion prevention of aluminium alloys in desalination plants:part 2[J].Anti-Corrosion Methods and Materials, 1981, 28(7):4-10. [21] WONGKASEMJIT S, WASNTAKORN A.Laboratory study of corrosion effect of dimethyl-mercury on natural gas processing equipment[J].JCSE, 1999, 1(1):1-12. [22] 羊东明,刘强,李亚光.5083铝合金换热器汞腐蚀机理及脱汞工艺[J].腐蚀与防护, 2010, 31(9):715-717. [23] 陈飞,解利昕,孙晨,等.动电位极化曲线法研究铝合金材料在海水中腐蚀现象[J].天津化工, 2014, 28(5):12-14. [24] LIAO C M, OLIVE J M, GAO M, et al.In-situ monitoring of pitting corrosion in aluminum alloy 2024[J].CORROSION, 1998, 54(6):451-458. [25] SILVA J W J, BUSTAMANTE A G, CODARO E N, et al.Morphological analysis of pits formed on Al2024-T3 in chloride aqueous solution[J].Applied Surface Science, 2004, 236(1-4):356-365. [26] 张海永,孟宪林,孙东明,等.pH值对5083铝合金腐蚀行为的影响[J].山东化工, 2015, 44(15):37-41.
点击查看大图
计量
- 文章访问数: 108
- HTML全文浏览量: 80
- PDF下载量: 8
- 被引次数: 0