Influence of E36 Steel Plate Components on the Toughness of Submerged Arc Welding Joint
-
摘要: 针对TMCP工艺生产的3个炉批次E36钢12 mm板,开展了钢板及埋弧焊接头力学性能、系列温度冲击试验,研究了钢中C、Ni、Nb、Ti元素对钢板埋弧焊接头韧性的影响。研究结果表明,降低钢中C含量、添加少量Ni元素有利于提高埋弧焊接头低温韧性,采用Nb、Ti微合金化,有利于细化母材晶粒及抑制焊接热影响区晶粒粗化,而钢中Nb元素对焊缝微观组织及韧性有不利影响,应进行适量控制。Abstract: In order to study the influence of elements C,Ni, Nb and Ti in steel on the toughness of submerged arc welding joint, the mechanical property tests and series of temperature Charpy impact tests were carried out for 3 batches of 12 mm E36 steel plates produced by TMCP process. The results indicated that the low-temperature toughness of the submerged arc welding joint could be improved by reducing the C element and adding the Ni element; Nb and Ti microalloying was helpful to refine the grain of parent material and at the same time to inhibit the grain coarsening of heat-affected zone; However, the Nb element should be controlled properly because of its adverse effect on the toughness of the submerged arc welding joint.
-
[1] 张晶波.TMCP工艺生产36 kg级高强度船板研究[J].宽厚板,2009,15(2):15-18. [2] 孙宪进,徐洪庆,李旺生,等.TMCP工艺在高强度船板生产中的研究与应用[J].钢铁,2010,45(1):87-90. [3] 杜则裕,张德勤,田志凌.低碳低合金钢焊缝金属的显微组织及其影响因素[J].钢铁,1999,34(12):67-71. [4] 尹桂全,高甲生,洪永昌,等.低碳Ti-Nb系列钢焊后显微组织和性能[J].焊接学报,2001,22(2):71-74. [5] 杨景红,王小燕,刘刚.Nb、Ti微合金化对Q345R压力容器板焊接性能的影响[J].钢铁,2012,47(2):87-91. [6] 李少英,韩毅华,朱立光,等.Ti、V、Nb元素对DH36焊接热影响区显微组织的影响[J].钢铁钒钛,2016,37(5):54-59. [7] 黄刚.合金元素对高强度钢焊接热影响区微观组织和韧性的影响[D].武汉:武汉科技大学,2019. [8] EVANS G M,YATES D.The effect of heat treatment on the microstructure and properties of structural steel weld deposits[M]//Welding for Challenging Environments.Amsterdam:Elsevier,1986:263-272.
点击查看大图
计量
- 文章访问数: 41
- HTML全文浏览量: 10
- PDF下载量: 8
- 被引次数: 0