TA22合金扩散焊接接头的组织与性能

李彦默; 马照伟; 徐哲; 李培跃; 付文; 刘向前; 李秋龙; 陈斌; 余黎明; 刘晨曦

TA22合金扩散焊接接头的组织与性能

1. 中国船舶重工集团公司第七二五研究所, 河南洛阳 471023;
2. 天津大学材料科学与工程学院, 天津 300354

详细信息

作者简介:
李彦默,男,1989年生,工程师,研究方向为高温结构材料及扩散连接研究。E-mail:warriormo@163.com

中图分类号: TG407
计量
- 文章访问数: 228
- HTML全文浏览量: 135
- PDF下载量: 12
- 被引次数: 0
出版历程
- 收稿日期: 2021-03-18
- 刊出日期: 2021-10-25

Microstructure and Mechanical Properties of Diffusion Welded Joints of TA22 Titanium Alloy

1. Luoyang Ship Material Research Institute, Luoyang 471023, China;
2. School of Materials Science & Engineering, Tianjin University, Tianjin 300354, China

摘要

摘要: 利用真空扩散焊接方法，研究不同焊接温度对TA22合金接头组织和性能的影响，并通过焊后热处理改善接头的综合性能。结果表明：随着扩散焊接温度的升高，TA22合金扩散焊接接头的抗拉强度和屈服强度逐渐降低，而伸长率和断面收缩率则表现出先升高后降低的趋势，其拐点在950℃。经850℃退火处理后，TA22合金扩散焊接接头的塑性得到明显的改善。
- 钛合金 /
- 扩散焊接 /
- 热处理 /
- 界面组织 /
- 力学性能
Abstract: Vacuum diffusion bounding technique was adopted to weld TA22 titanium alloy, the effects of welding temperature on microstructure and mechanical properties of the joints were investigated, and post-weld heat treatment was adopted to improve the comprehensive performance of the joints. The results showed that with the increasing of welding temperature, the tensile strength and yield strength of the TA22 joint decreased, the elongation and reduction of area increased at first and then decreased, and the maximum elongation and reduction of area of diffusion welded were at 950℃. The plasticity of the TA22 joints were improved by annealing treatment.
- titanium alloy /
- diffusion bounding /
- heat treatment /
- interface structure /
- mechanical properties

HTML全文

参考文献(11)

[1]	HE P, FENG J C, ZHANG B G, et al.A new technology for diffusion bonding intermetallic TiAl to steel with composite barrier layers[J].Materials Characterization, 2003, 50(1):87-92.
[2]	SAM S, KUNDU S, CHATTERJEE S.Diffusion bonding of titanium alloy to micro-duplex stainless steel using a nickel alloy interlayer:Interface microstructure and strength properties[J].Materials & Design, 2012, 40:237-244.
[3]	USTINOV A I, FALCHENKO Y V, ISHCHENKO A Y, et al.Diffusion welding of γ-TiAl based alloys through nano-layered foil of Ti/Al system[J].Intermetallics, 2008, 16(8):1043-1045.
[4]	WANG X R, YANG Y Q, LUO X, et al.An investigation of Ti-43Al-9V/Ti-6Al-4V interface by diffusion bonding[J].Intermetallics, 2013, 36:127-132.
[5]	曹健.TiAl与TiC金属陶瓷自蔓延反应辅助扩散连接机理研究[D].哈尔滨:哈尔滨工业大学, 2007.
[6]	吴铭方.铝合金与不锈钢低温扩散焊及界面主组元扩散行为研究[D].镇江:江苏大学, 2011.
[7]	蔡小强.Ti2AlNb合金扩散连接工艺及性能研究[D].天津:天津大学, 2017.
[8]	徐家磊, 高福洋, 齐风华, 等.油井管用钛/钢真空扩散焊工艺研究[J].热加工工艺, 2017, 46(11):58-61.
[9]	KUNDU S, SAM S, CHATTERJEE S.Evaluation of interface microstructure and mechanical properties of the diffusion bonded joints of Ti-6Al-4V alloy to micro-duplex stainless steel[J].Materials Science and Engineering:A, 2011, 528(15):4910-4916.
[10]	KUNDU S, SAM S, CHATTERJEE S.Interface microstructure and strength properties of Ti-6Al-4V and microduplex stainless steel diffusion bonded joints[J].Materials & Design, 2011, 32(5):2997-3003.
[11]	李维, 康聪, 侯智敏, 等.热处理对Ti31合金显微组织与力学性能的影响[J].热加工工艺, 2019, 48(16):169-170.