Study on the Variation Relationship of Anticorrosive Coating Viscosity with Temperature
-
摘要: 介绍了涂料粘度测定的4种方法以及相关现行国家标准、ISO标准。用斯托默粘度计等检测手段,研究了影响涂料粘度的关键因素——温度,结果表明,温度对于涂料粘度的影响较大,随着温度的增加,4种涂料的粘度都近似呈线性降低。Abstract: Four methods of viscosity determination of coatings and relevant national standards were introduced. Temperature, the key factor affecting the viscosity of coatings, was studied by means of Stomer viscometer. The results showed that temperature had a great influence on the viscosity of coatings, and that with the increase of temperature, the viscosities of the four coatings decreased linearly.
-
Key words:
- coatings /
- viscosity /
- temperature /
- test method /
- influence factor
-
[1] 李燕,叶春霞.影响溶剂型涂料粘度的因素[J].涂料工业,2003,33(9):20-21. [2] 屠振文.涂料粘度及其测定方法[J].上海涂料,2006,44(2):31-33. [3] 王飞.涂料黏度不同测定方法的讨论[J].上海涂料,2013,51(11):50-53. [4] 全国涂料和颜料标准化技术委员会色漆和清漆用流出杯测定流出时间:GB/T 6753.4-1988[S].北京:中国标准出版社,1996:1-7. [5] 付平,刘艳琳.涂料黏度(涂-4)测量结果的不确定度评定[J].表面技术,2007,36(4):89-90. [6] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.胶黏剂黏度的测定单圆筒旋转黏度计法:GB/T 2794-2013[S].北京:中国标准出版社,2013. [7] 虞莹莹.涂料黏度测定:旋转黏度计法[J].现代涂料与涂装,2003,6(5):48-50. [8] 中国石油和化学工业协会.涂料黏度的测定斯托默黏度计法:GB/T 9269-2009[S].北京:中国标准出版社,2010. [9] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.色漆和清漆用旋转黏度计测定黏度第1部分:以高剪切速率操作的锥板黏度计:GB/T 9751.1-2008[S].北京:中国标准出版社,2008. [10] 张丽萍,张其滨.涂料粘度的测量及对施工性能的影响[J].涂装与电镀,2004(2):44-47. [11] The International Organization for Standardization.Paints and varnishes-Examination and preparation of test samples:ISO 1513-1992[S].Swithzerland:ISO,2010:1-6. [12] The International Organization for Standardization.Paints and varnishes-Samping of products in liquid or paste form:ISO 1512-1991[S].Swithzerland:ISO,2010:1-4. [13] 张丽萍,张其滨,徐翠竹.流变增稠剂对溶剂型涂料黏度的影响[J].现代涂料与涂装,2005,8(1):48-49. -
点击查看大图
计量
- 文章访问数: 37
- HTML全文浏览量: 10
- PDF下载量: 9
- 被引次数: 0
下载:
