SiC-Si合金化复相陶瓷干摩擦磨损性能的研究

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

SiC-Si合金化复相陶瓷干摩擦磨损性能的研究

桑可正, 刘林, 傅恒志

文章导航 > 材料开发与应用 > 2005 > 20(4): 1-4,8

桑可正, 刘林, 傅恒志. SiC-Si合金化复相陶瓷干摩擦磨损性能的研究[J]. 材料开发与应用, 2005, 20(4): 1-4,8. doi: 10.19515/j.cnki.1003-1545.2005.04.001

引用本文:

桑可正, 刘林, 傅恒志. SiC-Si合金化复相陶瓷干摩擦磨损性能的研究[J]. 材料开发与应用, 2005, 20(4): 1-4,8. doi: 10.19515/j.cnki.1003-1545.2005.04.001

SANG Ke-zheng, LIU Lin, FU Heng-zhi. A Research on the Properties of the Alloyed SiC-Si Ceramic Composites in Dry Friction and Wear[J]. Development and Application of Materials, 2005, 20(4): 1-4,8. doi: 10.19515/j.cnki.1003-1545.2005.04.001

Citation:

SANG Ke-zheng, LIU Lin, FU Heng-zhi. A Research on the Properties of the Alloyed SiC-Si Ceramic Composites in Dry Friction and Wear[J]. Development and Application of Materials, 2005, 20(4): 1-4,8. doi: 10.19515/j.cnki.1003-1545.2005.04.001

桑可正, 刘林, 傅恒志. SiC-Si合金化复相陶瓷干摩擦磨损性能的研究[J]. 材料开发与应用, 2005, 20(4): 1-4,8. doi: 10.19515/j.cnki.1003-1545.2005.04.001

引用本文:

桑可正, 刘林, 傅恒志. SiC-Si合金化复相陶瓷干摩擦磨损性能的研究[J]. 材料开发与应用, 2005, 20(4): 1-4,8. doi: 10.19515/j.cnki.1003-1545.2005.04.001

SANG Ke-zheng, LIU Lin, FU Heng-zhi. A Research on the Properties of the Alloyed SiC-Si Ceramic Composites in Dry Friction and Wear[J]. Development and Application of Materials, 2005, 20(4): 1-4,8. doi: 10.19515/j.cnki.1003-1545.2005.04.001

Citation:

SANG Ke-zheng, LIU Lin, FU Heng-zhi. A Research on the Properties of the Alloyed SiC-Si Ceramic Composites in Dry Friction and Wear[J]. Development and Application of Materials, 2005, 20(4): 1-4,8. doi: 10.19515/j.cnki.1003-1545.2005.04.001

SiC-Si合金化复相陶瓷干摩擦磨损性能的研究

doi: 10.19515/j.cnki.1003-1545.2005.04.001

1. 西北工业大学凝固技术国家重点实验室, 陕西西安 710072;
2. 长安大学, 陕西西安 710064

中图分类号: TG115.5^＋8
计量
- 文章访问数: 11
- HTML全文浏览量: 7
- PDF下载量: 0
- 被引次数: 0
出版历程
- 收稿日期: 2005-04-01
- 网络出版日期: 2024-06-15

A Research on the Properties of the Alloyed SiC-Si Ceramic Composites in Dry Friction and Wear

1. State Key Laboratory of Solidification Processing, Xi’an 710072, China;
2. Chang’an University, Xi’an 710064, China

摘要: 在SiC-Si中加入Ni、Ti或B₄C形成SiC-Si-Ni、SiC-Si-Ti及SiC-Si-B等复相陶瓷材料。研究了不同温度下的干摩擦磨损行为与机理。探讨了在摩擦表面形成固体润滑与液体润滑，以改善摩擦磨损性能的两种途径在SiC-Si复相陶瓷上实现的可行性。结果表明，通过摩擦反应在表面形成固体润滑膜，是改善SiC-Si复相陶瓷干摩擦性能的有效途径。
- 碳化硅 /
- 摩擦磨损 /
- 合金化
Abstract: The ceramic composites of SiC-Si-Ni, SiC-Si-Ti and SiC-Si-B were formed of the SiC-Si ceramic through doping with Ni, Ti and B₄C.The behavior and mechanism of the composites in dry friction at different temperature were investigated. Approaches of solid and liquid lubrication, formed during friction to improve the friction and wear property of the SiC-Si ceramic were discussed. It was shown that solid lubrication film formed in friction reaction was efficient for improvement of friction and wear property of the SiC-Si.
- Silicon carbide /
- Friction and wear /
- Alloying

参考文献(0)

资源附件(0)

WeChat

点击查看大图

计量

文章访问数: 11
HTML全文浏览量: 7
PDF下载量: 0
被引次数: 0

/

下载: 全尺寸图片幻灯片

分享

用微信扫码二维码

分享至好友和朋友圈

返回

版权所有 © 《材料开发与应用》编辑部豫ICP备13020589号-2

地址：电话：(0379)67256265; (0379)67256345 Email：TG023@163.com

本系统由北京仁和汇智信息技术有限公司开发