A Discussion of Bend Diameter in Bend Test of 10CrNi3MoV Steel Welded Joints
-
摘要: 采用不同弯心直径,测定了屈服强度为590 MPa级10CrNi3MoV钢焊接接头弯曲试验后不同部位的伸长率,并结合该级别钢弯曲试验的其它相关规定,说明了现行的10CrNi3MoV钢焊接接头弯曲试验中弯心直径的规定比较苛刻,亟待修订。
-
关键词:
- 弯心直径 /
- 伸长率 /
- 弯曲试验 /
- 焊接接头 /
- 10CrNi3MoV钢
Abstract: With different bend diameters in bend test of 10CrNi3MoV steel welded joints,the percentage elongations of different parts have been determined.In contrast with other relating prescripts in bend test of the same grade steel,the given stipulation for bend diameter in bend test of 10CrNi3MoV steel welded joints proves to be rigid and need to be revised.-
Key words:
- Bend diameter /
- Percentage elongation /
- Bending testing /
- Welded joint /
- 10CrNi3MoV steel
-
[1] 周振丰,张文钺合编.焊接冶金与金属焊接性[M].北京:机械工业出版社,1988. [2] 谢琦,王希东,张晓华,等.关于焊接工艺评定中弯曲试验的体会[J].焊接,2005(1):33-34. [3] 刘传玉,郭军,李卫东.关于修订弯曲试验有关规定的依据[J].东北电力技术,2004(3):24-26. [4] 司春杰.浅谈冷弯试验的影响因素[J].理化检验-物理分册,1997,33(7):31-33. [5] 陆君雄.影响碳素结构钢中板冷弯性能的因素分析[J].柳钢科技,1993(3):41-44.
点击查看大图
计量
- 文章访问数: 17
- HTML全文浏览量: 7
- PDF下载量: 1
- 被引次数: 0