Influence of Deoxidizer on Mechanical Property of Deposited Metal of Electrode
-
摘要: 向焊条药皮中添加不同比例的脱氧剂金属锰和钛铁获得4种电焊条,通过焊条熔敷金属化学成分分析、力学性能试验及金相试验,研究了金属锰、钛铁作为脱氧剂对电焊条熔敷金属力学性能的影响。结果表明,随着药皮中金属锰含量的增加,焊条熔敷金属拉伸强度升高,冲击韧性出现峰值;随着钛铁含量增加,焊条熔敷金属拉伸强度升高,冲击韧性提高。Abstract: Manganese and ferrotitanium were added as deoxidizers into the coat of electrodes.Influence of the deoxidizers on mechanical property of deposited metal of electrode was investigated throngh analysis of the composition,mechanical property and microstructure.The result indicates that as the content of manganese increases,tensile strengths increases and impact toughness peak value appeares,as ferrotitanium increases,tensile strengths and impact toughness increases.
-
Key words:
- Deoxidizer /
- Manganese /
- Ferrotitanium /
- Deposited metal /
- Mechanical property
-
[1] 张子荣,李升鹤.电焊条[M].北京:机械工业出版社,1996. [2] 崔忠圻主编.金属学与热处理[M].北京:机械工业出版社,1989. [3] Evans G.Effect of manganese on the microstructure andproperties of all-weld metal deposits[J].WeldingJournal,1980(3):67-75. [4] Farrar R A,Harrison P L.Microstructural developmentandtoughness of C-Mn and C-Mn-Ni weld metals Part 2:Toughness[J].Metal Construction,1987(8):447-450. [5] 齐俊杰,等.微合金化钢[M].北京:冶金工业出版社,2006. [6] 于启湛.钢的焊接脆化[M].北京:机械工业出版社,1992.
点击查看大图
计量
- 文章访问数: 22
- HTML全文浏览量: 9
- PDF下载量: 1
- 被引次数: 0