浸渗时间对无压浸渗制备Al/SiCp陶瓷基复合材料的影响

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

浸渗时间对无压浸渗制备Al/SiCp陶瓷基复合材料的影响

徐跃, 高霖, 崔崇, 钱凤

文章导航 > 材料开发与应用 > 2011 > 26(4): 20-23

徐跃, 高霖, 崔崇, 钱凤. 浸渗时间对无压浸渗制备Al/SiCp陶瓷基复合材料的影响[J]. 材料开发与应用, 2011, 26(4): 20-23. doi: 10.19515/j.cnki.1003-1545.2011.04.005

引用本文:

徐跃, 高霖, 崔崇, 钱凤. 浸渗时间对无压浸渗制备Al/SiCp陶瓷基复合材料的影响[J]. 材料开发与应用, 2011, 26(4): 20-23. doi: 10.19515/j.cnki.1003-1545.2011.04.005

XU Yue, GAO Lin, CUI Chong, QIAN Feng. Infiltration Time Effect of Pressureless Infiltration Preparation of Al/SiCp Ceramic Matrix Composites[J]. Development and Application of Materials, 2011, 26(4): 20-23. doi: 10.19515/j.cnki.1003-1545.2011.04.005

Citation:

XU Yue, GAO Lin, CUI Chong, QIAN Feng. Infiltration Time Effect of Pressureless Infiltration Preparation of Al/SiCp Ceramic Matrix Composites[J]. Development and Application of Materials, 2011, 26(4): 20-23. doi: 10.19515/j.cnki.1003-1545.2011.04.005

徐跃, 高霖, 崔崇, 钱凤. 浸渗时间对无压浸渗制备Al/SiCp陶瓷基复合材料的影响[J]. 材料开发与应用, 2011, 26(4): 20-23. doi: 10.19515/j.cnki.1003-1545.2011.04.005

引用本文:

徐跃, 高霖, 崔崇, 钱凤. 浸渗时间对无压浸渗制备Al/SiCp陶瓷基复合材料的影响[J]. 材料开发与应用, 2011, 26(4): 20-23. doi: 10.19515/j.cnki.1003-1545.2011.04.005

XU Yue, GAO Lin, CUI Chong, QIAN Feng. Infiltration Time Effect of Pressureless Infiltration Preparation of Al/SiCp Ceramic Matrix Composites[J]. Development and Application of Materials, 2011, 26(4): 20-23. doi: 10.19515/j.cnki.1003-1545.2011.04.005

Citation:

XU Yue, GAO Lin, CUI Chong, QIAN Feng. Infiltration Time Effect of Pressureless Infiltration Preparation of Al/SiCp Ceramic Matrix Composites[J]. Development and Application of Materials, 2011, 26(4): 20-23. doi: 10.19515/j.cnki.1003-1545.2011.04.005

浸渗时间对无压浸渗制备Al/SiCp陶瓷基复合材料的影响

doi: 10.19515/j.cnki.1003-1545.2011.04.005

徐跃^1,2,
高霖¹,
崔崇²,
钱凤²

1. 南京航空航天大学机电学院, 江苏南京 210016;
2. 南京理工大学材料科学与工程学院, 江苏南京 210094

中图分类号: TB331
计量
- 文章访问数: 6
- HTML全文浏览量: 5
- PDF下载量: 0
- 被引次数: 0
出版历程
- 收稿日期: 2011-02-23
- 网络出版日期: 2024-03-28

Infiltration Time Effect of Pressureless Infiltration Preparation of Al/SiCp Ceramic Matrix Composites

1. College of Mechanical and Electronic Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;
2. College of Materials Science and Engineering, Nanjing University Science and Technology, Nanjing 210094, China

摘要: 本文采用无压浸渗法,研究浸渗时间对Al/SiCp陶瓷基复合材料组织、致密度、硬度的影响。浸渗保温时间1h,能浸透,但致密度差,硬度低。保温时间3h,发生粉化现象。结果表明浸渗保温时间2h是无压浸渗较好的工艺参数。
- Al/SiCp陶瓷基复合材料 /
- 无压浸渗 /
- 组织 /
- 致密度 /
- 硬度
Abstract: Microstructure,density and rigidity of Al/SiCp ceramic matrix composites prepared by pressureless infiltration.were investigated in this paper.The result indicates that the infiltration in due course of time made Si and Mg diffusion and interface reaction conducted fully,which increased interface wetting property and decreased interface loose and pore,and advanced the aluminium alloys infiltration.Holding one hour at proper temperature got full infitration,but poor density and low rigidity,while holding three hours got pulverization so two hours shall be a proper parameter.
- Al/SiCp ceramic matrix composites /
- Pressureless infiltration /
- Microstructure /
- Density /
- Rigidity

参考文献(0)

资源附件(0)

WeChat

点击查看大图

计量

文章访问数: 6
HTML全文浏览量: 5
PDF下载量: 0
被引次数: 0

/

下载: 全尺寸图片幻灯片

分享

用微信扫码二维码

分享至好友和朋友圈

返回

版权所有 © 《材料开发与应用》编辑部豫ICP备13020589号-2

地址：电话：(0379)67256265; (0379)67256345 Email：TG023@163.com

本系统由北京仁和汇智信息技术有限公司开发