碳纤维增强聚醚醚酮复合材料研究进展

徐姗姗; 黄东亚; 郑劲东; 杨东杰; 马志超

碳纤维增强聚醚醚酮复合材料研究进展

中国船舶重工集团公司第七二五研究所厦门材料研究院, 福建厦门 361000

详细信息

作者简介:
徐姗姗,女,1988年生,工程师,硕士,主要研究方向为复合材料。

中图分类号: TB332
计量
- 文章访问数: 355
- HTML全文浏览量: 93
- PDF下载量: 71
- 被引次数: 0
出版历程
- 收稿日期: 2021-06-02
- 刊出日期: 2021-10-25

Research Progress of Carbon Fiber Reinforced PEEK Composites

Xiamen Branch of Luoyang Ship Material Research Institute, Xiamen 361000, China

摘要

摘要: 近年来，碳纤维增强热塑性复合材料（CFRTP），尤其是碳纤维/聚醚醚酮（CF/PEEK）复合材料以其优异的综合性能受到了大量关注。高性能碳纤维/聚醚醚酮复合材料具有强度大、韧性好、使用温度高等诸多优点，在航空航天、机械、电气、汽车工业和生物工程等领域得到了广泛的应用。针对近年的研究热点，对碳纤维/聚醚醚酮复合材料在界面性能、力学性能、生物相容性、成型工艺、失效机理等方面的研究进展进行了综述，为材料的制备技术研究及产业化应用奠定基础。
- 碳纤维 /
- 聚醚醚酮 /
- 复合材料
Abstract: In recent years, carbon fiber reinforced thermoplastic composites(CFRTP), especially carbon fiber reinforced polyether ether ketone(CF/PEEK) composites, have received a lot of attention due to their excellent comprehensive properties. High performance polyether ether ketone composites has many advantages, such as excellent strength and stiffness, good toughness, high temperature resistance, making it widely used in aerospace, machinery, electrical, automotive and biological engineering fields. The research progress of carbon fiber reinforced polyether ether ketone composites in the aspects of interfacial properties, mechanical properties, biocompatibility, forming process and failure mechanism were reviewed, which laid a foundation for the preparation technology research and industrial application of the materials.
- carbon fiber /
- PEEK /
- composite material

HTML全文

参考文献(26)

[1]	林有希, 高诚辉.碳纤维增强聚醚醚酮复合材料的研究及应用[J].塑料工业, 2005, 33(10):5-8.
[2]	赵文砚.聚醚醚酮纤维/碳纤维针刺毡及复合材料的制备与性能研究[D].长春:吉林大学, 2019.
[3]	HASSAN E A M, GE D T, YANG LL, et al.Highly boosting the interlaminar shear strength of CF/PEEK composites via introduction of PEKK onto activated CF[J].Composites Part A:Applied Science and Manufacturing, 2018, 112:155-160.
[4]	WANG S D, YANG Y C, MU Y F, et al.Synergy of electrochemical grafting andcrosslinkable crystalline sizing agent to enhance the interfacial strength of carbon fiber/PEEK composites[J].Composites Science and Technology, 2021, 203:108562.
[5]	CHEN J L, WANG K, ZHAO Y.Enhanced interfacial interactions of carbon fiber reinforced PEEK composites by regulating PEI andgraphene oxide complex sizing at the interface[J].Composites Science and Technology, 2018, 154:175-186.
[6]	LIU H S, ZHAO Y, LI N, et al.Enhanced interfacial strength of carbon fiber/PEEK composites using a facile approach via PEI&ZIF-67 synergistic modification[J].Journal of Materials Research and Technology, 2019, 8(6):6289-6300.
[7]	PAN L, YAPICI U.A comparative study on mechanical properties of carbon fiber/PEEK composites[J].Advanced Composite Materials, 2016, 25(4):359-374.
[8]	STEINBERG E L, RATH E, SHLAIFER A, et al.Carbon fiber reinforced PEEK Optima-A composite material biomechanical properties and wear/debris characteristics of CF-PEEK composites for orthopedic trauma implants[J].Journal of the Mechanical Behavior of Biomedical Materials, 2013, 17:221-228.
[9]	GARCIA-GONZALEZ D, RODRIGUEZ-MILLAN M, RUSINEK A, et al.Investigation of mechanical impact behavior of short carbon-fiber-reinforced PEEK composites[J].Composite Structures, 2015, 133:1116-1126.
[10]	GODARA A, RAABE D, GREEN S.The influence of sterilization processes on the micromechanical properties of carbon fiber-reinforced PEEK composites for bone implant applications[J].Acta Biomaterialia, 2007, 3(2):209-220.
[11]	SHI R, ZHANG J S, LI W Y, et al.An effective surface modification strategy to boost PEEKosteogenesis using porous CaP generated in well-tuned collagen matrix[J].Applied Surface Science, 2021, 555:149571.
[12]	DEVINE D M, HAHN J, RICHARDS R G, et al.Coating of carbon fiber-reinforcedpolyetheretherketone implants with titanium to improve bone apposition[J].Journal of Biomedical Materials Research Part B:Applied Biomaterials, 2013, 101B(4):591-598.
[13]	LUO H L, XIONG G Y, YANG Z W, et al.Preparation of three-dimensional braided carbon fiber-reinforced PEEK composites for potential load-bearing bone fixations.Part I.Mechanical properties andcytocompatibility[J].Journal of the Mechanical Behavior of Biomedical Materials, 2014, 29:103-113.
[14]	许治平.高性能连续纤维增强聚醚醚酮复合材料的制备及性能研究[D].长春:吉林大学, 2017.
[15]	JI C M, WANG B, HU J Q, et al.Effect of different preparation methods on mechanical behaviors of carbon fiber-reinforced PEEK-Titanium hybrid laminates[J].Polymer Testing, 2020, 85:106462.
[16]	周华民, 蒋维, 黄志高, 等.一种连续碳纤维增强聚醚醚酮复合材料的制备方法及产品:CN108047470A[P].2018-05-18.
[17]	单毫, 陈宇, 李俊杰, 等.红外加热缠绕成型工艺参数对CF/PEEK复合材料层间剪切性能的影响[J].复合材料科学与工程, 2020(1):39-46.
[18]	HOSSEINI S M A, BARAN I, AKKERMAN R.Thermal modeling strategies for laser assisted tape winding(latw) process[C].21st International Conference on Composite Materials, 2017.
[19]	HAN X T, YANG D, YANG CC, et al.Carbon fiber reinforced PEEK composites based on 3D-printing technology for orthopedic and dental applications[J].Journal of Clinical Medicine, 2019, 8(2):240.
[20]	STEPASHKIN АА, CHUKOV D I, SENATOV F S, et al.3D-printed PEEK-carbon fiber (CF) composites:Structure and thermal properties[J].Composites Science and Technology, 2018, 164:319-326.
[21]	LUO M, TIAN X Y, SHANG J F, et al.Bi-scale interfacial bond behaviors of CCF/PEEK composites by plasma-laser cooperatively assisted 3D printing process[J].Composites Part A:Applied Science and Manufacturing, 2020, 131:105812.
[22]	FUJIHARA K, HUANG Z M, RAMAKRISHNA S, et al.Influence of processing conditions on bending property of continuous carbon fiber reinforced PEEK composites[J].Composites Science and Technology, 2004, 64(16):2525-2534.
[23]	牛一凡, 杨赢, 姚佳伟.环境温度对碳纤维/聚醚醚酮复合材料拉伸性能及疲劳寿命的影响[J].宇航材料工艺, 2016, 46(2):63-67.
[24]	BONNHEIM N, ANSARI F, REGIS M, et al.Effect of carbon fiber type on monotonic and fatigue properties of orthopedic grade PEEK[J].Journal of the Mechanical Behavior of Biomedical Materials, 2019, 90:484-492.
[25]	DU DD, HU Y B, LI H G, et al.Open-hole tensile progressive damage and failure prediction of carbon fiber-reinforced PEEK-titanium laminates[J].Composites Part B:Engineering, 2016, 91:65-74.
[26]	CHEN C Y, ZHANG C, LIU C L, et al.Rate-dependent tensile failure behavior of short fiber reinforced PEEK[J].Composites Part B:Engineering, 2018, 136:187-196.